Canon Lce5 Instruction Manual

171
wPrinting
You can crop the image and print only 
the trimmed portion as if the image was 
recomposed.  Do the trimming right 
before printing. If you set the trimming 
and then set the print settings, you may 
have to set the trimming again.
1 On the print setting screen, select [Trimming].
2 Set the trimming frame size, position, and aspect ratio.
 The image area within the trimming  frame will be printed. The 
trimming frame’s aspect ra tio can be changed with [
Paper settings].
Changing the...

wPrinting
172
 Depending on the printer , the trimmed image area  might not be printed 
as you specified.
  The smaller you make the trimming fr ame, the grainier the picture will 
look on the print.
  While trimming the image, look at th e camera’s LCD monitor. If you look 
at the image on a TV sc reen, the trimming frame  might not be displayed 
accurately.
Handling Printer ErrorsIf you resolve a printer error (no in k, no paper, etc.) and select [Continue] to 
resume printing but it doe s not resume,...

173
You can set the print type, date imprinting, and file No. imprinting. The 
print settings will be applied to all print-ordered images. (They cannot 
be set individually for each image.)
1Select [Print order].
X Under the [ 3] tab, select [ Print 
order], then press < 0>.
2Select [Set up].
  Select [Set up ], then press .
3Set the option as desired.
  Set the [Print type ], [Date ], and [ File 
No. ].
  Select the option, then press < 0>. 
Select the setting, then press < 0>.
W Digital Print Order...

W Digital Print Order Format (DPOF)
174
4 Exit the setting.
 Press the < 7> button.
X The print order screen will reappear.
  Next, select [Sel.Image] or [ All 
image ] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple, thumbnail images ar e printed on one sheet.
K
LBothPrints both the standard and index prints.
Date On
[On ] imprints the recorded  date on the print.
Off
File numberOn[On ] imprints the file No. on the print.
Off
  Even if [ Date] and [...

175
W Digital Print Order Format (DPOF)
 Sel.Image
Select and order images one by one.
Press the  button to display the 
three-image view. To return to the single-
image display, press the < u> button.
After completing the print order, press 
the < M > button to save the print 
order to the card.
[Standard] [Both]
Press the < V> key to set the number 
of copies to be printed for the displayed 
image.
[Index]
Press the < V> key to checkmark the 
box < X> and the image will be included 
in the index...

176
With a PictBridge printer, you can easily 
print images with DPOF.
1Preparing to print.
 See page 164. Follow the “Connecting  the Camera to a Printer” 
procedure up to step 5.
2Under the [ 3] tab, select [Print order].
3Select [Print].
  [Print] will be displayed only if the camera is connected to the 
printer and printing is possible.
4Set the [Paper settings]. (p.166)
  Set the printing effects (p.168) if necessary.
5Select [OK].
W Direct Printing with DPOF
  Before printing, be sure  to set the...

177
By connecting the camera to a computer, you can transfer images from 
the camera’s card by operating the camera. This is called direct image 
transfer. Before connecting the camera to a computer, be sure to install 
the provided software (EOS DIGITAL Solution Disk on CD-
ROM) in the computer.
For instructions to install the pr ovided software, see the separate 
sheet, CD-ROM Guide.
1Set the camera’s power switch to 
.
2Set the shooting mode to any 
mode except < k>.
3Connect the camera to the...

d Transferring Images to a Computer
178
4Set the camera’s power switch to 
.
 When the program selection dialog 
window appears on the computer, 
select [EOS Utility ].
X The [ EOS Utility ] window will appear 
on the computer, and the direct image 
transfer screen will appear on the 
camera’s LCD monitor.
The images sent to the computer will be saved in the [My Pictures ] 
folder or [ Pictures] folder in subfolders organized according to the 
shooting date.
 All images
This is to transfer all the images...

179
d Transferring Images to a Computer
Options other than [ All images] are explained below. To start the image 
transfer, press the < l> button.
  New images
Images which have not yet been trans ferred to the computer will be 
selected by the camera automatically and transferred.
  Transfer order images
You select the images and they are transferred to the computer in a 
batch. To select the images, see page 180.
  Select & transfer
You select the images to be transferred 
individually. To exit, press...

d Transferring Images to a Computer
180
Under the [ 3] tab, you can use 
[Transfer order ] to select the images to 
be transferred to a computer.
When you select [ Transfer order 
images ] on page 179, you can transfer 
the images set by  the transfer order.
 Sel.Image
Select and order images one by one. 
Press the  key to include the 
displayed image in the transfer order. 
The < X> mark will also appear on the 
upper left.
After completing the transfer order, press 
the < M > button to save the...