Canon Lbp 5000 User Guide

Loading Index Card Size Media in the Paper Source2-28
Loading and Outputting Paper
2
3Load the Index Card size media so that the edge of the media 
is aligned with the front side of the paper cassette.
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
If you use Index Card size media that has been poorly cut, multiple sheets of that 
may be fed at once. In this case, fan the Index Card size media thoroughly, and 
then align the edges of the stack on a...

2-29
Loading and Outputting Paper
2
Loading Index Card Size Media in the Paper Source
NOTE
To print letterhead paper or paper printed with a logo, load the paper so that the 
printing side is facing up, as shown in the following figure.
( : Feeding direction)
4While holding the lock release lever of the side paper guides, 
slide the guides to the mark for the size of the loaded Index 
Card size media.
The side paper guides move together.
 

Loading Index Card Size Media in the Paper Source2-30
Loading and Outputting Paper
2
IMPORTANT
Be sure to align the paper guides with the width of the Index Card size media. If the 
paper guides are too loose or too tight, this may result in misfeeds or paper jams.
5While holding the lock release lever of the rear paper guide, 
slide the guide to the size mark for the loaded Index Card size 
media.
 

2-31
Loading and Outputting Paper
2
Loading Index Card Size Media in the Paper Source
6Hold down the Index Card size media as shown in the figure, 
make sure that the stack does not exceed the load limit marks 
(A), and then set it under the hooks (B) on the paper guides.
Make sure that there is sufficient space between the hooks of the paper guides 
and the stack of the Index Card size media. If there is no sufficient space, slightly 
reduce the amount of Index Card size media.
IMPORTANT
The following...

Loading Index Card Size Media in the Paper Source2-32
Loading and Outputting Paper
2
7Set the paper cassette in the printer.
Push the paper cassette into the printer firmly until the front side of the paper 
cassette is flush with the front surface of the printer.
8Register the size of the loaded paper using the following 
procedure.
This printers paper cassette cannot automatically detect the paper size. 
Therefore, you need to register the size of the loaded paper.
9Display the Printer Status Window.
For...

2-33
Loading and Outputting Paper
2
Loading Index Card Size Media in the Paper Source
10From the [Options] menu, select [Device Settings]  [Register 
Paper Size in Cassettes].
11Select [Index Card], then click [OK].
Next, configure the printer driver (See p. 2-59).
 

Loading Index Card Size Media in the Paper Source2-34
Loading and Outputting Paper
2
Loading Index Card Size Media in the Manual Feed Slot
Load Index Card size media in the manual feed slot using the following procedure.
Be sure to load Index Card size media so that the printing side is facing down when 
loading it in the manual feed slot.
1Adjust the paper guides to the width of the loaded Index Card 
size media as shown in the figure.
The paper guides move together.
 

2-35
Loading and Outputting Paper
2
Loading Index Card Size Media in the Paper Source
IMPORTANT
Be sure to align the paper guides with the width of the Index Card size media. If the 
paper guides are too loose or too tight, this may result in misfeeds or paper jams.
NOTE
To print letterhead paper or paper printed with a logo, load the paper so that the 
printing side is facing down, as shown in the following figure.
( : Feeding direction)
 

Loading Index Card Size Media in the Paper Source2-36
Loading and Outputting Paper
2
2Gently insert the paper until it touches the back of the printer 
while supporting the Index Card size media with hands as 
shown in the figure.
When the paper is loaded, it is sent into the slot a little.
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
•Load the Index Card size media so that it is straight.
•If the Index Card size media is curled, flatten the curls by...

2-37
Loading and Outputting Paper
2
Loading Envelopes in the Paper Source
Loading Envelopes in the Paper Source
This section describes the procedure for loading envelopes in the paper source.
The paper source that you can load envelopes is the paper cassette and manual 
feed slot. If you want to print continuously, load the envelopes in the paper cassette.
When printing only one envelope that is different from those loaded in the paper 
cassette, load the envelope in the manual feed slot.
IMPORTANT
•For...