Canon Lbp 5000 User Guide

3-4Installing the CAPT Software
Setting Up the Printing Environment
3
Installing the CAPT Software
This section describes the procedure for installing the CAPT software when 
connecting this printer to your computer with a USB cable.
There are the following methods for installing the printer driver:
*1 If you want to install the manuals only, see Installing the Manuals, on p. 4-82.
*2 When installing the CAPT software from [Add Printer Wizard], the USB port for connecting this printer has to have...

3-5Installing the CAPT Software
Setting Up the Printing Environment
3
NOTE
•For details on the procedure for installing the software when installing the optional 
network board and connecting the printer to the computer with LAN, see Network 
Guide.
•For details on the procedure for installing the software when sharing this printer on a 
network and printing from a computer on the network, see Printing from a Network 
Computer by Sharing the Printer on a Network, on p. 3-54.
•A USB cable is only supplied...

3-6Installing the CAPT Software
Setting Up the Printing Environment
3
3Connect the A-type (flat) end of the USB cable to the USB port 
on the computer.
4Turn the computer on and start up Windows.
IMPORTANT
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then 
install the CAPT software using this procedure.
5Insert the supplied LBP5000 User Software CD-ROM into 
the CD-ROM drive.
If the CD-ROM is already in the drive, eject the disk and re-insert it into the drive.
IMPORTANT...

3-7Installing the CAPT Software
Setting Up the Printing Environment
3
6Click [Easy Installation] or [Custom Installation].
[Easy Installation] allows you to install the printer driver and the instruction 
manuals simultaneously. If you do not install the manuals, select [Custom 
Installation].
7Click [Install].
If you selected [Custom Installation] in Step 6, clear the [Online Manuals] check 
box, and then click [Install].
 

3-8Installing the CAPT Software
Setting Up the Printing Environment
3
8Click [Next].
9Confirm the contents and select [I accept the terms in the 
license agreement], and then click [Next].
10Select [Manually Set Port to Install], then click [Next].
 

3-9Installing the CAPT Software
Setting Up the Printing Environment
3
11Select the [Install Printer Driver through a USB Connection] 
check box, then click [Next].
Depending on the system environment, a message that prompts you to restart the 
computer may appear. In this case, restart the computer and continue the 
installation.
If you are using Windows XP Service Pack 2 or another operating system 
equipped with Windows Firewall, the following screen is displayed. Specify 
whether to configure Windows...

3-10Installing the CAPT Software
Setting Up the Printing Environment
3
NOTE
•If you are using Windows 2000 and the [Digital Signature Not Found] dialog box 
appears, click [Yes].
•If you are using Windows XP/Server 2003 and the [Hardware Installation] dialog 
box appears, click [Continue Anyway].
13When the following screen is displayed, turn the printer ON.
Press  of the power switch to turn the printer ON.
Installation of the USB class driver and the printer driver starts automatically.
NOTE
•If the...

3-11Installing the CAPT Software
Setting Up the Printing Environment
3
14The screen that informs you of the completion of the printer 
driver installation is displayed. Click [Exit].
15If [Easy Installation] is selected in Step 6, the manuals are 
installed.
 

3-12Installing the CAPT Software
Setting Up the Printing Environment
3
16Confirm the installation results, then click [Next].
NOTE
If the printer driver is not installed properly, see Installation Problems, on p. 7-29.
17Select the [Restart Computer Now (Recommended)] check 
box, then click [Restart].
Windows restarts.
The installation of the USB class driver and the printer driver is completed.
 

3-13Installing the CAPT Software
Setting Up the Printing Environment
3
Installing with Plug and Play
For Windows 98/Me
The screen shots used in this section are from Windows Me.
1Make sure that the printer and computer are OFF.
2Connect the B-type (square) end of the USB cable to the USB 
connector on the printer.
3Connect the A-type (flat) end of the USB cable to the USB port 
on the computer.