Canon Lbp 3460 User Guide

5-18
Printing Environment Settings
5
SETUP Menu Settings
CASSETTE1 SIZE
A4*, LTR, LGL, EXEC, MIXED SIZES, CUSTOM SIZE, CUSTOM SIZER, A5, B5
Specifies the size of the paper loaded in the paper cassette in the printer unit 
(Cassette 1).
IMPORTANT
When you change the orientation of the custom size paper loaded in the paper 
cassette frequently, it is convenient if CASSETTE1 SIZE is set to MIXED SIZES. 
When CASSETTE1 SIZE is set to MIXED SIZES, you do not need to specify the 
setting for CASSETTE1 SIZE each...

5-19
Printing Environment Settings
5
SETUP Menu Settings
-Make sure that the size of the paper loaded in the paper cassette matches the 
paper size specified in the printer driver before printing. If they do not match, the 
printer may stop printing, displaying the message , or a 
paper jam may occur. Be sure to check if the paper size specified in the printer 
driver matches the size of the paper loaded in the paper cassette before using the 
printer. However, if SPECIAL MODE J (See p. 5-36) is set to ON,...

5-20
Printing Environment Settings
5
SETUP Menu Settings
If ON is specified, the printer detects if the size of the paper in a paper source 
matches the paper size of the received data in the following order starting with the 
multi-purpose tray.
Multi-purpose Tray  ➞ Cassette 1  ➞ Cassette 2 * 
1
*1: Only when the optional paper feeder is installed
NOTE
•If INVLDPAPER TRAY (See the next item) is set to ON, the setting for this item is 
ignored, and the printer detects the paper source starting with the...

5-21
Printing Environment Settings
5
SETUP Menu Settings
AUTO  SELECTION
TRAY..................................... ON*, OFF
CASSETTE 1 ........................ ON*, OFF
CASSETTE 2*1..................... ON*, OFF
*1 CASSETTE 2 is displayed only when the optional paper feeder is installed.
Specifies the paper source to be automatically selected when the autom\
atic paper 
selection is specified in the SELECT FEEDER menu. Specify the setting for the 
mu lti-purpose tray and paper cassette individually.
If ON...

5-22
Printing Environment Settings
5
SETUP Menu Settings
2-SIDED PRINT.
OFF*, ON
Specifies whether the printer should print on one side or both sides of the paper.
If ON is specified, the printer prints on both sides of the paper.
IMPORTANT
When printing from Windows or Macintosh, specify 2-sided printing in the printer 
driver. When you want to print from a computer in which an operating system such 
as MS-DOS and UNIX is used and cannot specify 2-sided printing, specify the 
setting in this item.
NOTE...

5-23
Printing Environment Settings
5
SETUP Menu Settings
LAYOUT MENU Options
COPIES
1 to 9999; 1*
Specifies the number of copies to be printed.
The printer prints the specified number of  copies.
OFFSET Y/OFFSET  X
-50.0 to 50.0; 0.0* (mm)
Adjusts the printing position in the vertical direction (Y) or the horizontal direction 
(X) by the specified value.
The printing position changes as follows according to the increase and decrease 
of the specified value.
OFFSET Y: As the value increases, the gutter width...

5-24
Printing Environment Settings
5
SETUP Menu Settings
BIND.LOCATION
LONG EDGE*, SHORT EDGE
Specifies which edge of the paper, the long edge or short edge, is to be bound. 
When you want to bind paper on which 2-sided printing is performed, the printer 
adjusts the binding location automatically according to the paper surface.
Specify the binding location (top/bottom/left/right) and its width in GUTTER (See 
the next item).
If LONG EDGE is specified, the binding location is created on the long\
 edge of...

5-25
Printing Environment Settings
5
SETUP Menu Settings
GUTTER
-50.0 to 50.0; 0.0* (mm)
Specifies the gutter width for printing with the binding location created. A gutter is 
created with the image shifted by the specified value. You can shift the image in 
the + direction with a positive value and in the – direction with a negative value.
Specify on which edge of the paper, the long edge or short edge, the gutter is to 
be created in BIND.LOCATION (See the previous item). On which edge (top/...

5-26
Printing Environment Settings
5
SETUP Menu Settings
ALT.METHOD
ON*, OFF
Specifies the printing side of the last page on a job with odd number of pages 
when 2-SIDED PRINT. (See p. 5-22) is set to ON.
The printing side of the last page varies depending on the setting for this item or 
paper source as the following.
•When printing from the paper cassette
If ON is specified, the printer prints on the underside of the loaded paper.
If OFF is specified, the printer prints on the upper side of the loaded...

5-27
Printing Environment Settings
5
SETUP Menu Settings
•
When printing from the multi-purpose tray
If ON is specified, the printer prints on the upper side of the loaded paper.
If OFF is specified, the printer prints on the underside of the loaded paper.
Specify OFF for this item when you want to match the setting of the orientation or 
printing side for the last page with those for its previous page, such as when you 
w ant to print previously printed paper etc. whose printing orientation or printing...