Canon Lbp 3000 User Guide

Specifications7-2
Appendix
7
Specifications
Hardware Specifications
Type Desktop Page Printer
Printing method Electrophoto Method (On-demand fixing)
Print speed
Plain Paper (64 to 90 g/m2)
When printing A4 continuously
14 pages/min.
*The printing speed drops in steps depending on the 
paper size, paper type, number of pages printed, 
and fixing mode settings. (This is a safety feature 
that prevents damage due to overheating.)
Warm-up time 0 seconds (10 seconds or less when the printer is on)
First print...

Specifications7-3
Appendix
7
Software Specifications
Storage environment
(Printer unit only)Storage Temperature Range: 0 to 35°C (32 to 95°F)
Humidity: 10 to 80% RH (non-condensing)
Host interfaceWindows 98/Me: USB Full-Speed (USB1.1 equivalent)
Windows 2000/XP/Server 2003/Vista: USB 2.0 
Hi-Speed/USB Full-Speed (USB1.1 equivalent)
Power110 - 127 V (±10%) 50/60 Hz (±2 Hz)
220 - 240 V (±10%) 50/60 Hz (± 2 Hz)
Power consumption
(at 20
°C or 68°F)110 - 127 V
Average during operation:  approx. 261W
Average...

Printer Dimensions7-4
Appendix
7
Printer Dimensions
■Printer
(mm)(mm)
Front View
Front View
369.8 63.9
132 250.5216.7281.1
Output Tray Multi-Purpose Tray
 

Optional Accessories7-5
Appendix
7
Optional Accessories
The LBP3000 can be used directly over a network by installing the optional network 
adapter (AXIS1650).
For details on AXIS1650 and the supported operating systems, refer to the Axis 
Communications website (http://www.axis.com)
Network Adapter
You can use the optional network adapter by connecting it to the LBP3000 using a 
USB cable. The network adapter connects to the computers using peer to peer 
networking. You can also connect to the printer...

Optional Accessories7-6
Appendix
7
NOTE
•If you are using the network adapter, you should use the NetSpot Device Installer utility 
software to initialize the default settings of the printer connected to the network.
•Refer to the instruction manual provided with the network adapter for details on the 
network adapter.
•Contact the store where you purchased your LBP3000 for inquiries on purchasing the 
network adapter.
LBP3000
AXIS 1650TCP/IP
Client Client 
LBP3000
AXIS 1650TCP/IP
Client  Client 
Print...

NetSpot Device Installer7-7
Appendix
7
NetSpot Device Installer
The supplied CD-ROM includes NetSpot Device Installer, which is a utility that 
initializes the settings of a printer connected to the network, as well as the printing 
software (CAPT). The NetSpot Device Installer does not need to be installed on 
your computer, but is simply used to initialize the network connection settings of the 
printer.
For detailed information on the NetSpot Device Installer, refer to the users manual 
included with...

Windows Firewall7-8
Appendix
7
Windows Firewall
Windows Firewall is a feature of Windows XP Service Pack 2 and other operating 
systems that protects your computer by blocking unauthorized access over the 
network.
If using the printer with an operating system equipped with Windows Firewall, you 
need to set Windows Firewall to unblock communications.
You need to perform the following procedure on the print server (the computer that 
is directly connected to the printer) and the clients (the computers...

Windows Firewall7-9
Appendix
7
Configuring Windows Firewall to unblock communication 
with client computers
1Insert the supplied LBP3000 User Software CD-ROM into 
the CD-ROM drive.
If CD-ROM Setup appears, click [Exit].
If you are using Windows Vista and the [AutoPlay] dialog box appears, click 
[Open folder to view files], and then proceed to Step 3.
2From the [Start] menu, select [My Computer] ([Computer] for 
Windows Vista), right-click the CD-ROM icon, and then select 
[Open] from the pop-up menu....

Windows Firewall7-10
Appendix
7
NOTE
You cannot click [Unblock] if the firewall is already configured to unblock 
communication with client computers.
5Click [OK].
NOTE
To check if the Windows Firewall block has been properly cleared, use the following 
procedure.
1.Display the [Windows Firewall] ([Windows Firewall Settings] for Windows 
Vista) dialog box.
-For Windows XP: From the [Start] menu, select [Control Panel], and then click 
[Network and Internet Connections] ➞ [Windows Firewall].
-For Windows...

Windows Firewall7-11
Appendix
7
Configuring Windows Firewall to block communication 
with client computers
1Insert the supplied LBP3000 User Software CD-ROM into 
the CD-ROM drive.
If CD-ROM Setup appears, click [Exit].
If you are using Windows Vista and the [AutoPlay] dialog box appears, click 
[Open folder to view files], and then proceed to Step 3.
2From the [Start] menu, select [My Computer] ([Computer] for 
Windows Vista), right-click the CD-ROM icon, and then select 
[Open] from the pop-up menu....