Canon LBP 2900 2900i User's Guide

Installing the CAPT Software3-16
Setting Up the Printing Environment
3
The [Add New Hardware Wizard] dialog box appears.
For Windows 98, click [Next].
14Select [Specify the location of the driver (Advanced)], then 
click [Next].
For Windows 98: Select [Search for the best driver for your device. 
(Recommended)], then click [Next].
A dialog box is displayed that allows you to specify the search location.
15If the supplied LBP2900/2900i User Software CD-ROM is not 
in the CD-ROM drive, insert the...

Installing the CAPT Software3-17
Setting Up the Printing Environment
3
16Select [Search for the best driver for your device. 
(Recommended).], remove the checkmark from [Removable 
Media (Floppy, CD-ROM...)], place a checkmark next to 
[Specify a location].
For Windows 98: Remove the checkmarks from [Floppy disk drives] and 
[CD-ROM drive], place a checkmark next to [Specify a location].
17Click [Browse], and then select a folder.
Select [D:\English\Win98_Me], and then click [OK].
In this case the CD-ROM...

Installing the CAPT Software3-18
Setting Up the Printing Environment
3
18Make sure that the correct path is displayed in the [Specify a 
location] field, and then click [Next].
19Click [Next].
20Enter a new name in the [Printer name] field if you want to 
change the name of the printer.
If another printer driver has been already installed in the computer, the message 
[Do you want your Windows-based programs to use this printer as the default 
printer?] appears. In this case, select [Yes] or [No]. 

Installing the CAPT Software3-19
Setting Up the Printing Environment
3
21Click [Finish].
Windows will begin copying files.
22Once the installation complete dialog is displayed, click [OK].
23Click [Finish].
This completes the installation of the USB class driver and printer driver.
For Windows 2000
Installing from CD-ROM Setup
1Make sure that the computer and printer are turned off at the 
power. 

Installing the CAPT Software3-20
Setting Up the Printing Environment
3
2Open the USB cover.
3Connect the B-type (square) end of the USB cable to the USB 
connector on the rear side of the printer, and close the USB 
cover. 

Installing the CAPT Software3-21
Setting Up the Printing Environment
3
4Connect the A-type (flat) end of the USB cable to the USB port 
on the computer.
5Turn the computer on and start up Windows 2000.
IMPORTANT
If the Plug and Play automatic setup wizard appears, click [Cancel] and install the 
CAPT software using the following procedure.
6Log on as a user who is a member of the Administrators 
group.
NOTE
Full Control Permissions are required for the installation of the printer driver.
7Insert the...

Installing the CAPT Software3-22
Setting Up the Printing Environment
3
8Click [Install].
A dialog box is displayed to confirm the language.
9Confirm the language and click [Yes].
After the preparation for installation is completed, the CAPT (Canon Advanced 
Printing Technology) software installer starts up, and the [Setup Wizard] dialog 
box appears.
10Click [Next].
The [License Agreement] dialog box is displayed. 

Installing the CAPT Software3-23
Setting Up the Printing Environment
3
11Confirm the contents of the agreement and select [I accept 
the terms in the license agreement], and then click [Next].
12Confirm that there is a checkmark next to [Install Printer 
Driver through a USB Connection], then click [Next].
13The message [Installation cannot be stopped once it starts. 
Do you want to continue?] is displayed. Click [Yes].
NOTE
If the [Digital Signature Not Found] dialog box appears, click [Yes]. 

Installing the CAPT Software3-24
Setting Up the Printing Environment
3
14When the following window is displayed, turn the printer on.
Press the   side of the power switch to turn the printer on.
Installation of the USB class driver (supplied with the OS) and the printer driver 
starts automatically.
NOTE
If the computer does not automatically recognize the printer, refer to Installation 
Problems, on p. 6-27. 

Installing the CAPT Software3-25
Setting Up the Printing Environment
3
15A window is displayed to inform you that the installation is 
complete. Select [Restart my computer now], then click [Exit].
Windows restarts.
This completes the installation of the USB class driver (supplied with the OS) and 
printer driver.
Installing with Plug and Play
1Make sure that the computer and printer are turned off at the 
power.
2Open the USB cover.