Canon large format printer imagePROGRAF iPF6400 User Manual

4
To use the printer in remote printer mode, start the print server.
To use the NetWare file server as the print server, enter  LOAD PSERVER.NLM at the file server and press the
Enter key.Note
•This procedure is not required when using queue server mode.
Use PCONSOLE to set up the print server if bindery queue server mode or remote printer mode is used.
1
Log into NetWare as Admin and start PCONSOLE.
2
Switch to bindery mode.
3
If the print server has not been created, create it.
1.
In  Available Options...

2
Select Administrator Mode  and click Logon.
3
If a password has been set on the printer, enter the password.
4
Click Network  in the Device Manager  menu at left to display the  Network page.
5
Click Edit in the upper-right corner of the  NetWare group to display the  Edit NetWare Protocol Settings
page.
6
Refer to the NetWare Settings Items table to complete the settings.
NetWare Settings ItemsItemDetailsDefault Set-tingFrame TypeSpecify the type of frame to use in NetWare.DisabledNCP Burst...

ItemDetailsDefault Set-tingNPrinterPrint Server Name(0–47 characters)—Printer NumberSpecify the number of the printer connected to the NetWare print server.(0-254)07
Complete the following settings based on the selected service.
•
If you have selected Bindery PServer: Queue Server Mode (Using a Bindery Print Server)
1.
In File Server Name , enter the file server name.
2.
In Print Server Name , enter the name of the print server created in " Specifying NetWare Print Serv-
ices
→P.689 ."
3.
In...

Mac OS X Settings
Mac OS X Settings
Configuring the Destination in TCP/IP Networks  .................................................................................................. 694
Configuring the Destination for Bonjour Network  ................................................................................................ 695
Configuring the Destination for AppleTalk Networks  .......................................................................................... 697
Configuring the...

4
 
Select the model and type and then enter the IP ad-
dress before clicking the  Next button.
5
 
Complete  Printer Name  and Location  as desired and
click  Register .
6
 
Click  Finish .
Configuring the Destination for Bonjour Network
Configuring the Destination for Bonjour Network
Follow the steps below to configure the destination if you are using the printer in a network that uses the Bonjour func-
tion.
Important•Bonjour and IP Print (Auto) do not support printing to a printer on other network...

2
 
Click  Next.
3
 
Select the printer to register and click  Next.
4
 
Complete  Printer Name  and Location  as desired and
click  Register .
5
 
Click  Finish .
    
Configuring the Destination for Bonjour Network (Mac OS X)                                                                                                                                          iPF6400...

Configuring the Destination for AppleTalk Networks
Configuring the Destination for AppleTalk Networks
To print over an AppleTalk network, activate the AppleTalk protocol and configure the destination as follows.
Activating AppleTalk on the printer
Important•By default, the AppleTalk protocol is disabled on the printer.1
 
On the  Tab Selection screen  of the Control Panel, press  ◀ or  ▶ to se-
lect the Settings/Adj. tab (
).
Note
•If the Tab Selection screen is not displayed, press the Menu button.2...

Note
•The following procedures are based on Mac OS X 10.4. The method of configuring the destination varies depending on theversion of Mac OS X.•The imagePROGRAF printer driver is not compatible with AppleTalk.1
In System Preferences , click Network  to display the  Network window.
2
 
In  Show , choose  Built-in Ethernet . Next, click Apple-
Talk , select  Make AppleTalk Active , and click Apply
now .
3
Close the  Network window and save the settings.
Configuring the Printer's AppleTalk Network...

ItemDetailsDefault SettingZone (*2)Specify the printer zone name, up to 31 single-byte characters.However, do not use the following single-byte characters: Also avoid using * (which represents thedefault zone) in the middle of a string.**1:  The object name you have specified in Name is displayed in Printer Setup Utility (or Print Center) in Mac OS X 10.2.8–10.4. Ifyou use multiple printers in the same zone, assign a unique name to each printer. By default, the network interface name isCanon NB-18GB...

Other Settings
Other Settings
Specifying Printer-Related Information ....................................................................................................................... 700
Configuring the Communication Mode Manually .................................................................................................... 701
Email Notification When Printing is Finished or Errors Occur ........................................................................... 702
Initializing the Network...