Canon large format printer imagePROGRAF iPF6400 User Manual

Optional accessories
Optional accessories
Stand .......................................................................................................................................................................................... 671
Stand Parts .............................................................................................................................................................................. 672
Roll Holder Set...

Stand Parts
Stand Parts
a
Stand
A stand that holds the printer. It is equipped with casters to facilitate movement.
b
Output Stacker
Printed documents are ejected into the output tray.
For more information on using the Output Stacker, refer to  Using the Output Stacker
→P.564 and the  Output
Stacker Precautions
→P.563 .
c
Locking Caster
A locking caster that, when the switch is in the ON position, immobilizes the printer.
d
Accessory Pocket
Store printer manuals, assembly tools, and other items in this...

iPF6400 User's Guide
Basic Printing Workflow 19
Enhanced Printing Options35
Windows Software173
Mac OS X Software359
Handling and Use of Paper523
Control Panel629
Printer Parts 663
 
Network Setting
 
Network Environment ..................................................................... 674
Using RemoteUI ............................................................................. 677
Initial Settings ................................................................................. 679
NetWare...

Network Environment
Network Environment
Network Environment
Network Environment
System requirements
The system requirements, which vary depending on your network, are as follows.
•
Printing over a TCP/IP network (when using IPv4)
•
Compatible operating systems
•
Windows XP
•
Windows Server 2003
•
Windows Vista
•
Windows Server 2008
•
Windows 7
•
Windows Server 2003 x64
•
Windows Vista x64
•
Windows Server 2008 x64
•
Windows 7 x64
•
Mac OS X v10.2.8 or later
•
Unix (Solaris 9)
•
Unix (Red Hat 9)
•...

•Windows XP (Professional)
Note
•In NetWare 6.0, iPrint is not supported.
Network Environment
After confirming what type of network environment you will connect the printer to, set up the printer and computers as needed. For the specifications of the network interface,  see "Specifications ."
→P.934
•
Example of a Windows network
In Windows networks, print over TCP/IP.
Note
•NetBIOS is not supported.•
Example of a Macintosh network
In Macintosh networks, print over TCP/IP using the Bonjour...

•
Example of a NetWare network
Note
•Even if there is a NetWare server in your network environment, you can use it in conjunction with TCP/IP or AppleTalk.In this case, complete the settings for each protocol you will use.Network Environment                                                                                                                                                                                                       iPF6400...

Using RemoteUI
Using RemoteUI
Using RemoteUI
Using RemoteUI
RemoteUI is software with which you can access the printer via the network from your Web browser to confirm the
printer status, operate jobs, and configure the settings. Since the software (Web server) for using RemoteUI is built in the printer, preparing software other than a Web browser is unnecessary. You can use RemoteUI if an imagePROG-
RAF printer on a network is connected to your computer. If you start your Web browser and specify the IP...

 Important•For the Web browser, use Netscape Navigator 6.0 or later, Internet Explorer 5.01 or later, or Firefox 1.5 or later. For Mac OSX, Safari 1.32 or later or 2.03 or later also is supported.•This cannot be used connected via a proxy server. In environments where a proxy server is used, add the printer's IP ad-dress to Exceptions (addresses accessed without a proxy server) in the web browser proxy server settings. (Settings mayvary depending on the network environment.)•Enable JavaScript and...

Initial Settings
Initial Settings
Configuring the IP Address on the Printer ................................................................................................................ 679
Configuring the IP Address Using imagePROGRAF Device Setup Utility ............................................... 703
Configuring the IP Address Using the Printer Control Panel ....................................................................... 679
Configuring the IP Address Using ARP and PING Commands...

Note
•If the Tab Selection screen is not displayed, press the Menu button.2
Press the OK button.
The  Set./Adj. Menu  is displayed.
3
Press ▲ or  ▼ to select  Interface Setup , and then press the  OK button.
4
Press  ▲ or  ▼ to select  TCP/IP, and then press the  OK button.
5
Press  ▲ or  ▼ to select  IPv4, and then press the  OK button.
6
Press  ▲ or  ▼ to select  IPv4 Settings , and then press the  OK button.
7
Press  ▲ or  ▼ to select  IP Address , and then press the  OK button.
8
After you press  ◀...