Canon large format printer imagePROGRAF iPF6400 User Manual

•Press Back to access a higher menu in the menu list, and press  OK to access a lower one. If not all menu items
are displayed, hold down  ▲ or  ▼ to scroll through higher and lower menu items. Items you select are highlighted.
The scroll bar at right indicates the current position in the overall menu.
•
Lower menus are available if  is displayed at left next to the second and subsequent rows. To access the lower
menus, select the menu and press the  OK button.
Specifying menu items
Menu items can be set...

Specifying numerical values
Follow these steps to enter numbers. In this example, network settings items are entered.
1
 
Press the  ◀ or  ▶ button to move to the next field for input.
2
Press the  ▲ or  ▼ button to enter the value.
Note
•Hold down ▲ or ▼ to increase or decrease the value continuously.3
Repeat steps 1 and 2 to complete the settings, and then press the  OK button.
Note
•If a confirmation message is displayed regarding the setting you entered, press the OK button. The setting is...

Menu Structure
Menu Structure
The menu structure is shown categorized by tab. The * on the right side of an item indicates the default value.
The printer menu is classified into regular menu items available when no print job is in progress and menu during print-
ing items only available while printing is in progress.  see "Printer Menu Operations ."
→P.639
Regular menuMenu during printingPaper MenuNot displayedInk MenuThe same Ink Menu as normal is displayed.Job MenuThe same Job Menu as normal is...

 First Level Second Level Third Level Fourth Level Fifth Level   Return DefaultsPaper DetailsKeep Paper TypeOff *┋ On*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See Paper Reference Guide .) Types ofpaper in the printer driver and related software (as well as on the Control Panel) are updated when you install the printer driver fromthe User Software CD-ROM or if you update paper information with the Media Configuration Tool.  (See "Updating...

 First Level Second Level Third Level Fourth Level Fifth Level Sixth Level Seventh LevelTest PrintNozzle Check ┋ Status Print ┋ Interface Print ┋ Paper Details ┋ Print Job Log ┋ Menu MapAdjust PrinterHead Posi. Adj.Standard    Simple    OtherInitial adjustmt ┋ Manual (*1)  Feed PriorityAdj. PriorityAutomatic *┋ Print Quality ┋ Print Length    Adj. Quality (*2)Auto(GenuinePpr) ┋ Auto(OtherPaper) ┋ Manual    Adjust Length(*3)Adjustment-PrintA:High ┋ B:Standard/Draft     Change Set-tingsA:High ┋...

 First Level Second Level Third Level Fourth Level Fifth Level Sixth Level Seventh Level        Stateless Addr(*9)On ┋ Off *      Pri. DNS SrvAddr (*9)      Sec. DNS SrvAddr (*9)      DNS Host Name (*9)      DNS Domain Name (*9)  NetWare (*8)NetWare (*8)On ┋ Off *    Frame Type(*5)(*8)Auto Detect ┋ Ethernet 2 ┋ Ethernet 802.2 *┋ Ethernet 802.3 ┋Ethernet SNAP    Print Service(*5)(*8)BinderyPServer ┋ RPrinter ┋ NDSPServer *┋ NPrinter  AppleTalk (*8)On ┋ Off *  Ethernet Driver(*8)Auto Detect(*8)On *┋ Off...

 First Level Second Level Third Level Fourth Level Fifth Level Sixth Level Seventh Level  TrimEdge Re-loadAutomatic ┋ Off *┋ On  Rep.P.headPrintOff ┋ On *  Nozzle CheckFrequencyStandard *┋ 1 page    WarningOff *┋ On  Use RemoteUI(*8)On *┋ Off  Reset PaprSetngs (*8)  Show Job Log(*8)Off ┋ On *Prep.MovePrinterAdmin. Menu(*9)Change Pass-word (*9)(The screen for setting the password is displayed)  Init.Admin.Pswd (*9)Adj. Fine Feed (*12)(*13)Printer Info(*12)Paper Info Ink Info Head InfoProductName:   s/n:...

Menu Settings
Menu Settings
Menu items are as follows.
The printer menu is classified into regular menu items available when no print job is in progress and menu during print- ing items only available while printing is in progress.  see "Printer Menu Operations ."
→P.639
Regular menuMenu during printingPaper MenuNot displayedInk MenuThe same Ink Menu as normal is displayed.Job MenuThe same Job Menu as normal is displayed.Set./Adj. MenuA limited Set./Adj. Menu containing the following items is...

Setting ItemDescription, InstructionsPaper Details(The type of paperis displayed here.)(*1)Trim Edge FirstSelects whether or not to automatically cut the leading edge of the rollpaper when roll paper is loaded. (See "Cutting the Leading Edge of Roll Paper Automatically.")→P.548CutDustReduct.If you choose On, a line will be printed at the cut position when papercutting is selected. This option reduces the amount of debris given offafter cutting. It also helps prevent adhesive from sticking to the...

Ink Menu
Setting ItemDescription, InstructionsRep. Ink TankReplace the Ink Tank at this point. Follow the instructions displayedto complete the required procedure.  (See "Replacing Ink Tanks.")→P.836Head Cleaning APrinthead cleaning options.  (See "Cleaning the Printhead.")→P.846Execute Head Cleaning A if printing is faint, oddly colored, or con-tains foreign substances.
Job Menu
Setting ItemDescription, InstructionsJob Log(Choose from information aboutthe last three print jobs.)Document...