Canon Imagerunner C1028if User Guide

39
English

3	Set	up	Computers	and	Software

32
33
34
35
If you are using a shared printer 
in the Print Server (Point and 
Print) environment, it is 
necessary to install the Canon 
Driver Information Assist Service 
in the server computer to set up 
the printer configuration 
automatically or use 
Department ID Management.
If the Canon Driver Information 
Assist Service is already installed 
on your computer, this screen is 
not displayed.
If you are using an operating 
system equipped with Windows...

40

3	Set	up	Computers	and	Software

40
41
42
 
43
Installation of the printer driver is 
completed and the installation of 
the manuals will begin.
44
45
The Printer Driver Installation 
Guide is installed on your 
computer and a shortcut is created 
on the desktop.
46
47
Remove the PCL User Software 
CD-ROM or PS User Software CD-
ROM. Installation is complete.
 

41
English

3	Set	up	Computers	and	Software
Check	Installation
Verify that the drivers have been installed successfully and that the machine has been set as the default 
printer.
If the name of your machine is selected on the [Printer] screen from an application, it is set as the default printer.
1	Open the [Printers], [Printers and Faxes], or [Devices and Printers] folder.
Windows 2000: From the Windows task bar, click [Start] → [Settings] → [Control Panel] → double-click [Printers].
Windows XP/Server...

42

	 4	 Appendix
User	Manual	CD-ROM	(e-Manual)
The User Manual CD-ROM (e-Manual) is a software that enables you to select and view the HTML Manuals 
included on the CD-ROM via your computer screen. The e-Manual describes all of the functions and 
troubleshooting for the machine. Follow the instructions below to use the User Manual CD-ROM (e-Manual).
System	Requirements
The User Manual CD-ROM (e-Manual) can be used in the following system environments.
OS (Operating System)
Windows 2000 SP4, Windows XP,...

43
English

4	Appendix

When you start the e-Manual, the screen shown below is displayed.
If you are using a browser such as Internet Explorer for Windows XP, ActiveX blocks pop-ups in the background. If the e-Manual is 
not displayed properly, look for an information bar at the top of the page and click the information bar. 
A [Function List] 
Click to display the topic pages for function 
categories.
B  [Top]
 
Click to return to the top page.
C  [Contents]
 
Click to display the topic pages for...

Symbols	Used	in	This	Manual
The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety.
Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings.
Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always...

Do not bundle up or tie up the power cord in a knot, as this can result in a fire or electrical shock.Insert the power plug completely into the AC power outlet. Failure to do so can result in a fire or electrical shock.If excessive stress is applied to the connection part of the power cord, it may damage the power cord or the wires inside the machine may disconnect. This could result in a fire. Avoid the following situations:Connecting and disconnecting the power connector frequentlyTripping over the...

Do not dispose of used toner cartridges in open flames. This may cause the toner remaining inside the cartridges to ignite, resulting in burns or fire.Confirm that the power plug or power connecter is inserted completely after cleaning the machine. Failure to do so can result in an overheating and fire.Check regularly that the power cord and plug are not handled in the following manner. Failure to do so can result in a fire or electrical shock.There are burn marks on the power plug.The blade on the...

Power	Supply	Requirements
220 V to 240 V, 50/60 Hz
Precautions when connecting the power cordDo not connect this machine to an uninterruptible power source.Use an AC power outlet exclusively for the machine. Do not use the other sockets of the AC power outlet.Do not plug the power plug into the auxiliary outlet on a computer.Do not use the same AC power outlet for both the machine and any of the following equipment.Copy machineAir conditionerShredderEquipment that consumes a large amount of...

EMC	requirements	of	EC	Directive
This equipment conforms with the essential EMC requirements of EC Directive. We declare that this product conforms with the EMC requirements of EC Directive at nominal mains input 230 V, 50 Hz although the rated input of the product is 220 to 240 V, 50/60 Hz. Use of shielded cable is necessary to comply with the technical EMC requirements of EC Directive.
International	ENERGY	STAR	Program
As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the...