Canon Imagerunner C1028if User Guide
Here you can view all the pages of manual Canon Imagerunner C1028if User Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
19
English
2 Set Up the Machine
1 Press (Main Menu).
2 Press the right Any key to select .
3 Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
If the screen appears prompting you to enter the System
Manager ID and System Password, enter the System
Manager ID and System Password using - (numeric
keys), then press (Log In/Out). For details, see
“Security,” in the e-Manual.
4 Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
5 Press the right Any key to select .
Changes to...](http://img.usermanuals.tech/thumb/14/56443/w300_canon_imagerunner_c1028if-user-guide-20.png "Page 21
19
English
2 Set Up the Machine
1 Press (Main Menu).
2 Press the right Any key to select .
3 Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
If the screen appears prompting you to enter the System
Manager ID and System Password, enter the System
Manager ID and System Password using - (numeric
keys), then press (Log In/Out). For details, see
“Security,” in the e-Manual.
4 Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
5 Press the right Any key to select .
Changes to...")
19 English 2 Set Up the Machine 1 Press (Main Menu). 2 Press the right Any key to select . 3 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. If the screen appears prompting you to enter the System Manager ID and System Password, enter the System Manager ID and System Password using - (numeric keys), then press (Log In/Out). For details, see “Security,” in the e-Manual. 4 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 5 Press the right Any key to select . Changes to...
Page 22
![Page 22
20
2 Set Up the Machine
8 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK].
9 Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
10 Use - (numeric keys) to enter the IP
address, then press [OK].
11 Use - (numeric keys) to enter the
subnet mask then press [OK].
12 Use - (numeric keys) to enter the
gateway address, then press [OK].
13 Press (Main Menu) to return to the
Main Menu screen.
14 Press the main power switch on the right
side of the machine to “” side, wait at least...](http://img.usermanuals.tech/thumb/14/56443/w300_canon_imagerunner_c1028if-user-guide-21.png "Page 22
20
2 Set Up the Machine
8 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK].
9 Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
10 Use - (numeric keys) to enter the IP
address, then press [OK].
11 Use - (numeric keys) to enter the
subnet mask then press [OK].
12 Use - (numeric keys) to enter the
gateway address, then press [OK].
13 Press (Main Menu) to return to the
Main Menu screen.
14 Press the main power switch on the right
side of the machine to “” side, wait at least...")
20 2 Set Up the Machine 8 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 9 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 10 Use - (numeric keys) to enter the IP address, then press [OK]. 11 Use - (numeric keys) to enter the subnet mask then press [OK]. 12 Use - (numeric keys) to enter the gateway address, then press [OK]. 13 Press (Main Menu) to return to the Main Menu screen. 14 Press the main power switch on the right side of the machine to “” side, wait at least...
Page 23
![Page 23
21
English
2 Set Up the Machine
This is the setting for obtaining an IP address automatically. If you do not need to configure this setting
manually, follow the procedure below.
(In case the machine cannot obtain the IP address automatically, you can specify the IP address, subnet
mask, and gateway address. If you do not know them, skip each entry by pressing [OK].)
Press (Main Menu) → → * → →
→ → → → →
→ Enter the IP address → Enter the subnet mask → Enter the gateway address → →
(Main...](http://img.usermanuals.tech/thumb/14/56443/w300_canon_imagerunner_c1028if-user-guide-22.png "Page 23
21
English
2 Set Up the Machine
This is the setting for obtaining an IP address automatically. If you do not need to configure this setting
manually, follow the procedure below.
(In case the machine cannot obtain the IP address automatically, you can specify the IP address, subnet
mask, and gateway address. If you do not know them, skip each entry by pressing [OK].)
Press (Main Menu) → → * → →
→ → → → →
→ Enter the IP address → Enter the subnet mask → Enter the gateway address → →
(Main...")
21 English 2 Set Up the Machine This is the setting for obtaining an IP address automatically. If you do not need to configure this setting manually, follow the procedure below. (In case the machine cannot obtain the IP address automatically, you can specify the IP address, subnet mask, and gateway address. If you do not know them, skip each entry by pressing [OK].) Press (Main Menu) → → * → → → → → → → → Enter the IP address → Enter the subnet mask → Enter the gateway address → → (Main...
Page 24
![Page 24
22
2 Set Up the Machine
5 Press the right Any key to select .
Changes to the IP address, subnet mask, and gateway
address settings will be effective after restarting the
machine.
6 Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
7 Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
For instructions on the settings for IPv6, see “Network
Settings,” in the e-Manual.
8 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK].
9 Press the left Any key to select .
10 Press the...](http://img.usermanuals.tech/thumb/14/56443/w300_canon_imagerunner_c1028if-user-guide-23.png "Page 24
22
2 Set Up the Machine
5 Press the right Any key to select .
Changes to the IP address, subnet mask, and gateway
address settings will be effective after restarting the
machine.
6 Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
7 Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
For instructions on the settings for IPv6, see “Network
Settings,” in the e-Manual.
8 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK].
9 Press the left Any key to select .
10 Press the...")
22 2 Set Up the Machine 5 Press the right Any key to select . Changes to the IP address, subnet mask, and gateway address settings will be effective after restarting the machine. 6 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 7 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. For instructions on the settings for IPv6, see “Network Settings,” in the e-Manual. 8 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 9 Press the left Any key to select . 10 Press the...
Page 25
23 English 3 Set Up Computers and Software Types of Connection between Computers and the Machine There are two ways to connect the machine and computers: USB connection and network connection. Network Connection (For details about the set up, see p. 26.) The following functions are available with Network Connection: PC Print, Remote UI, PC Fax, Scan, E-Mail/I-Fax Scan to File Server For more information on how to use each function with network connection, refer to the following: PC Print →...
Page 26
24 3 Set up Computers and Software System Requirements Windows 2000CPU: Intel Pentium/133 MHz or fasterMemory: 128 MB or more Windows XP CPU: Intel Pentium/Celeron series300 MHz or fasterMemory: 128 MB or more Windows Server 2003 CPU: Intel Pentium/Celeron series133 MHz or fasterMemory: 128 MB or moreWindows Vista CPU: Intel Pentium 800 MHz or fasterMemory: 512 MB or more Windows Server 2008 CPU: Intel processor/1 GHz (x86 processor), 1.4 GHz (x64 processor) or fasterMemory: 512 MB or more Windows 7...
Page 27
25 English 3 Set up Computers and Software Details about each program installation can be found in the corresponding HTML manuals listed in the Manuals subsection below. Canon Font Manager Font Manager is a comprehensive program that helps you manage your fonts in Microsoft Windows. Printer Driver Installation Guide The Printer Driver Installation Guide describes UFR II printer driver installation, updating shared printer information, uninstallation, configuration, and printing. Canon...
Page 28
26 3 Set up Computers and Software Network Connection Before Installation The following procedures are explained using sample screens from Windows XP Professional. Log on as an Administrator to install the software. Make sure the machine is turned ON. (See “Turn on the Machine,” on p. 3.) Make sure the network cable is connected to the machine. If you want to use the machine as a network scanner, it must be connected to a computer over an IPv4 network. Make sure an IP address is assigned to the...
Page 29
27 English 3 Set up Computers and Software If you want to install only Color Network ScanGear, select only Color Network ScanGear in this step, then proceed to step 25. For more information refer to the Network ScanGear Installation Guide (located on the UFRII LT/FAX User Software CD-ROM). If the amount of free disk space is insufficient to install the software, an error message is displayed. Make sure there is sufficient disk space, and then try installing the software again. 5 6 7 – –...
Page 30
28 3 Set up Computers and Software 13 14 15 Installation of the printer driver is completed and the installation of the fax driver will begin. If the optional Super G3 FAX Board is not installed on the imageRUNNER C1028i, proceed to step 25. 16 17 18 If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server computer to set up the printer configuration automatically or use...