Canon Imageprograf Ipf8300 User Guide

7.Click the  Page Setup  tab to display the  Page Setup sheet.
8.Click  OSize Options  to display the  Paper Size Options  dialog box.
9. Enter a desired paper name in  Custom Paper Size Name. 430 mm Square  is used in this example.
10. Select mm in Units .
11. Enter 430 (16.9 in) in both  Width and Height .
Note•If  you  select  the  Fix  the  Ratio  of  the  Width  to  Height   check  box,  after  you  enter  a  value  in  either
Width  or Height , the other value will be automatically applied based on...

Printing on Non-Standard Paper Sizes (Mac OS X)This section describes how to register and print  Custom Page Sizes (Mac OS X 10.3.9-10.5)/  Custom Paper Sizes (Mac
OS X 10.6) based on the following example. Here, you will register a non-standard paper size named  430*430 in Custom
Page Sizes  (Mac OS X 10.3.9-10.5)/  Custom Paper Sizes (Mac OS X 10.6).
• Document: Any Type
• Page Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
• Paper: Sheets
• Media Type: Any type
• Paper Size: A square sheet (430...

5.Click  Manage Custom Sizes  in the CPaper Size  list to display the  Custom Page Sizes  dialog box.
6.In 
Page Size , enter the height and width of the original. Here, enter  43.00 cm in Height  and Width .
7. In Printer  Margins ,  enter 0.5  for  the  top  and  side  margins  and  2.3  for  the  bottom  margin.  Here,  measurements  are
entered in centimeters.
8. Double-click  Untitled in the list at left in the  Custom Page Sizes dialog box and enter the paper name—in this case,
430*430 .
9. Click...

12.Access the  Main pane.
13. In the AMedia Type  list, select the type of paper that is loaded.
14. After confirming that  DEasy Settings  is selected, select from the  EPrint Target  list.
15. Make your selection in the  FPrint Quality  list.
16. Access the  Page Setup  pane.
17.Click Cut Sheet  in the APaper Source  list.
Enhanced Printing Options 
>
 Printing banners or at other non-standard sizes 
>Printing on Non-Standard Paper Sizes (Mac OS X)iPF83003126
 

18.In CPage Size , make sure  430*430 is displayed, as registered in  Page Setup.
19. Confirm the print settings, and then click  MPrint  to start printing.Note•For tips on confirming print settings, see " Confirming Print Settings (Mac OS X)→P.482"
Enhanced Printing Options 
>
 Printing banners or at other non-standard sizes 
>iPF8300Printing on Non-Standard Paper Sizes (Mac OS X)3127
 

Tiling and multiple pages per sheet
Printing Multiple Originals Next to Each Other ................................................................................................ 128
Printing Multiple Originals Next to Each Other (Windows) ..........................................................................129
Printing Multiple Originals Next to Each Other (Mac OS X) ........................................................................131
 
Printing Multiple Pages Continuously...

Important•Free Layout cannot be used in 64-bit version of Windows.
imagePROGRAF Free Layout  (Macintosh)
Besides combining multiple pages in a single-page layout, you can combine originals from multiple files—even multiple
source applications—in a single-page layout.
For instructions on arranging originals from multiple applications, refer to the following topics.
•Printing Multiple Originals Next to Each Other (Windows)
→P.129
• Printing Multiple Originals Next to Each Other (Mac OS X)
→P.131
Printing...

3.Make sure the  Main sheet is displayed.
4.Click the  Layout tab to display the  Layout sheet.
5.Select the  APage Layout  check box.
6. Click  Free Layout  in the APage Layout  list.
Enhanced Printing Options 
>
 Tiling and multiple pages per sheet 
>Printing Multiple Originals Next to Each Other (Windows)iPF83003130
 

7.When you attempt to print, the imagePROGRAF Free Layout window is displayed. (At this point, the document will
not be printed yet.)
8. Edit and rearrange the image in the imagePROGRAF Free Layout window as desired.
Important•Without  closing  the  imagePROGRAF  Free  Layout  window,  repeat  steps  1–7  to  arrange  originals
from multiple applications on the same page.Note• For  instructions  on  editing  and  rearranging  images,  refer  to  the  imagePROGRAF  Free  Layout  help
topic.
9. Print from...

2.Access the  Page Setup  pane.
3.Select the  NFree Layout  check box.
4. Click  MPrint .
5. The Canon imagePROGRAF Free Layout  window is displayed.
Enhanced Printing Options 
>
 Tiling and multiple pages per sheet 
>Printing Multiple Originals Next to Each Other (Mac OS X)iPF83003132