Canon Imageprograf Ipf8300 User Guide

Scale to fit Roll Paper Width
Enlarge or reduce the original as a whole to match the roll paper width.Note• You can combine this function with rotating pages 90 degrees before printing so that the original width (rela-
tive to portrait orientation) matches the roll paper width in borderless printing.
For instructions on borderless printing of photos, images, and other documents to match the roll paper width, refer to the
following topics, as appropriate for your computer and operating system.
•Borderless...

4.Make sure the  Main sheet is displayed.
5.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
6. Select the print target in the  EPrint Target  list.
7. Click the  Page Setup  tab to display the  Page Setup sheet.
Enhanced Printing Options 
>
 Borderless Printing 
>Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)iPF83003104
 

8.In  the  APage  Size   list,  click  the  size  of  the  original  as  specified  in  the  application.  In  this  case,  click  ISO  A4 or
Letter (8.5"x11") .
9. Select and click a roll paper in the  LPaper Source  list.
10. Select the  BBorderless Printing  check box to display the  Information dialog box.
11.Select the width of the loaded roll in the  Roll Paper Width list—in this case, click  10-in. Roll (254.0mm).
12. Click OK to close the  Information  dialog box.
13. In CBorderless...

•Roll paper width: 10 inches (254.0 mm)
 
1. This sets the  BFormat for  and CPaper Size .Note•The configuration method varies depending on the OS and application software you are using.
If  Page  Setup   is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu....

5.Access the  Main pane.
6.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the  Page Setup  pane.
10.Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options 
>
 Borderless Printing 
>iPF8300Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)3107
 

11.Make sure the width of the loaded roll is displayed in the  BRoll Width  list—in this case,  10 in. (254.0mm).Note•If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion  on the  Main pane to update the printer information.
12. Make  sure  the  CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size  in  the  Page  Attributes
dialog box—in this case,  ISO A4.
13.Select the  DEnlarged/Reduced Printing  check box.
14. Select...

15.Confirm the print settings, and then click  MPrint  to start printing.Note•For tips on confirming print settings, see " Confirming Print Settings (Mac OS X)→P.482"
Enhanced Printing Options 
>
 Borderless Printing 
>iPF8300Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)3109
 

Printing banners or at other non-standard sizes
Printing Vertical or Horizontal Banners (Large-Format Printing) .....................................................................110
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows) ................................................111
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X) ..............................................115
 
Printing on Non-Standard Paper Sizes...

Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
This topic describes how to print a banner about five times as long as the roll width based on the following example. •Document: A horizontal banner created in Microsoft Word
• Page size: Non-standard (100×500 mm [3.9×19.7 in])
• Paper: Roll
• Paper type: Plain Paper
• Roll paper width: 16 in (406.4 mm)
Follow the steps below to print a banner in either horizontal or vertical format. 1. Register a Custom Paper Size.
Banners tend to...

4.Click  OSize Options  to display the  Paper Size Options  dialog box.
5. Enter a desired paper name in  Custom Paper Size Name. My Horizontal Banner  is used in this example.
6. In Units , click  mm.
7. Under  Paper Size , enter 100 in Width  and 500 in Height .
8. Click  Add to add the paper size of  My Horizontal Banner.
9. Click  OK to close the  Paper Size Options  dialog box.
10. Close the printer driver dialog box.Note•You can also specify a  Custom Size as the paper size. Note that  Custom Size...