Canon Imageprograf Ipf8300 User Guide

11.Make sure the width of the loaded roll is displayed in the  BRoll Width  list—in this case,  16 in. (406.4mm).Note•If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion  on the  Main pane to update the printer information.
12. Make  sure  the  CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size  in  the  Page  Attributes
dialog box—in this case,  ISO A4.
13.Select the  DEnlarged/Reduced Printing  check box.
14. Click...

Scaling
Enlarge or reduce originals by a particular amount, as desired.
For instructions on entering a scaling value to resize originals, refer to the following topics, as appropriate for your comput-
er and operating system.
•Resizing Originals by Entering a Scaling Value (Windows)
→P.74
• Resizing Originals by Entering a Scaling Value (Mac OS X)
→P.76
Note•For  better  printing  results  when  enlarging  photos  from  a  digital  camera  in  TIFF  or  JPEG  format,  use  an  im-
age-editing application...

3.Make sure the  Main sheet is displayed.
4.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
5. Select the printing application in the  EPrint Target  list.
6. Click the  Page Setup  tab to display the  Page Setup sheet.
Enhanced Printing Options 
>
 Printing enlargements or reductions 
>iPF8300Resizing Originals by Entering a Scaling Value (Windows)375
 

7.Select and click a roll paper in the  LPaper Source  list.
8. Select the width of the loaded roll in the  MRoll Paper Width  list—in this case, ISO A2/A3 Roll (420.0mm) .
9. In the  APage Size  list, click the size of the original as specified in the application. In this case, click  ISO A4.
10. Select the  CEnlarged/Reduced Printing  check box.
11. Click ISO A4  in the GPaper Size  list.
12. Click FScaling  and enter  120.Note•You can specify enlargement that exceeds the paper size, but in this case,...

•Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
 
1. This sets the  BFormat for  and CPaper Size .Note•The configuration method varies depending on the OS and application software you are using.
If  Page  Setup   is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup.
If it is not displayed, the settings are configured in...

5.Access the  Main pane.
6.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the  Page Setup  pane.
10.Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options 
>
 Printing enlargements or reductions 
>Resizing Originals by Entering a Scaling Value (Mac OS X)iPF8300378
 

11.Make sure the width of the loaded roll is displayed in the  BRoll Width  list—in this case,  ISO A2/A3 (420.0mm) .Note•If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion  on the  Main pane to update the printer information.
12. Make  sure  the  CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size  in  the  Page  Attributes
dialog box—in this case,  ISO A4.
13.Select the  DEnlarged/Reduced Printing  check box....

14.Click GScaling  and enter  120.Note•You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in  the  upper-left  corner.  In  this  case,  you  can  center  originals  by  selecting  the  JPrint  Centered
check box.
15. Confirm the print settings, and then click  MPrint  to start printing.
Note•For tips on confirming...

Printing at full size
Printing on Oversized Paper ............................................................................................................................. 81
Printing at Full Size (Windows) ..................................................................................................................... 82
Printing at Full Size (Mac OS X) ................................................................................................................... 84
 
Borderless Printing at...

Note•Paper larger than the maximum size supported by the printer cannot be used as paper for oversized printing.
(See " Paper Sizes
→P.771 ")
• Oversized printing (selecting  Oversize in Page Size  ) is only available in Windows.
• To perform oversized printing on a Macintosh computer, you must specify a non-standard page size and print
on it.
• To  specify  a  non-standard  paper  size  in  oversized  printing,  register  the  paper  size  as  a  Custom  Paper  Size.
Oversized  printing  is  not...