Canon Imageprograf Ipf8300 User Guide

3.Make sure the  Main sheet is displayed.
4.In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
5. After confirming that  DEasy Settings  is selected, click  Poster in the  EPrint Target  list.
6. Click the  Page Setup  tab to display the  Page Setup sheet.
Enhanced Printing Options 
>
 Printing banners or at other non-standard sizes 
>iPF8300Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)3113
 

7.In the  APage Size  list, click the size you registered,  My Horizontal Banner.
8. Select the  CEnlarged/Reduced Printing  check box.Note•If  the  CEnlarged/Reduced  Printing   check  box  is  not  displayed  on  the  Page  Setup  sheet,  clear  the
B Borderless Printing  check box.
9.Select and click a roll paper in the  LPaper Source  list.
10. After you click  EFit Roll Paper Width , the Information  dialog box is displayed.
11. Select the width of the loaded roll in the  Roll Paper Width list. In...

If printing is unsuccessful, you may be able to print after completing the following setting.1. On the  Layout  sheet, click  JSpecial Settings  to display the Special Settings  dialog box.
2.In the  FineZoom Settings  list, click Yes.
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)
This topic describes how to print a banner about five times as long as the roll width based on the following example. •Document: An original designed for a horizontal banner
• Page Size: Non-standard...

Follow the steps below to print a banner in either horizontal or vertical format.1. In the application, create an original in the format of a horizontal or vertical banner.
2. Register a  Custom Page Sizes  (Mac OS X 10.3.9-10.5)/  Custom Paper Sizes (Mac OS X 10.6).
Banners  tend  to  be  in  non-standard  sizes,  so  register  a  Custom  Page  Sizes  (Mac  OS  X  10.3.9-10.5)/  Custom  Paper
Sizes  (Mac OS X 10.6) in  Page Setup. In this example, 100×500 mm (3.9×19.7 in) is registered.
3. Print the...

5.Double-click  Untitled  in  the  list  at  left,  and  then  enter  a  name  for  the  page  size  you  want  to  register.  Here,  enter
100*500 .
If the  Untitled  size is not listed at left, click  + below the list.
6. Under  Page Size , enter 10 in  Width  and 50 in  Height . Here, measurements are entered in centimeters.
7. Specify the margins by entering  0.3 in  Printer Margins . Here, too, measurements are entered in centimeters.
8. Click  OK to close the  Custom Page Sizes  dialog box.
9. In...

6.Access the  Page Setup  pane.
7.Select and click a roll paper in the  APaper Source  list.
8. Make sure the width of the loaded roll is displayed in the  BRoll Width  list—in this case,  16 in. (406.4mm).
Note•If the width of the loaded roll is not displayed in  BRoll Width , click LPrinter Information  on the
Main  pane and update the printer information.
9.In CPage Size , make sure  100*500 is displayed, as registered in  Page Setup.
Enhanced Printing Options 
>
 Printing banners or at other...

10.Select the  DEnlarged/Reduced Printing  check box.
11. Click FFit Roll Paper Width .
12. Confirm the print settings, and click  MPrint  to start printing.Note•For tips on confirming print settings, see " Confirming Print Settings (Mac OS X)→P.482"
Printing on Non-Standard Paper Sizes
By specifying the paper size, you can print on non-standard sizes of paper.
There are two ways to print on non-standard paper sizes, as follows.
Registering non-standard paper size in the printer driver
After you...

•Page size: Square of non-standard dimensions (430×430 mm [16.9×16.9 in])
• Paper: Sheets
• Paper type: Any type
• Paper Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
1. Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer.
2. Choose  Print in the application menu.
3. Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows)
→P.205 ")
4. Make sure the  Main sheet is...

7.Click the  Page Setup  tab to display the  Page Setup sheet.
8.Click  Cut Sheet  in the LPaper Source  list.
9. Click  Custom Size  in the APage Size  list to display the  Custom Size Settings  dialog box.
10. Confirm that  mm is selected in  Units.
11. Enter 430 (16.9 in) in both  Width and Height .
12. Click OK to close the  Custom Size Settings  dialog box.
13. Confirm the print settings and print as desired.
Note•For tips on confirming print settings, see " Confirming Print Settings...

1.Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer.
2. Choose  Print in the application menu.
3. Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows)
→P.205 ")
4. Make sure the  Main sheet is displayed.
5.In the  AMedia Type  list, select the type of paper that is loaded.
6. After confirming that  DEasy Settings  is selected, select from the  EPrint Target  list....