Canon Imageprograf Ipf825 User Guide

1.
This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu. 2.
Select the printer in the  APrinter...

6.
Access the Main  pane.7.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
8. Make your selection in the  EPrint Target  list.
9. Make your selection in the  FPrint Quality  list.
10. Access the Page Setup pane. 11.
Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options > Other useful settings >
Making the Original Orientation Match the Paper Orientation (Mac OS X)
iPF8253
196
 

12.
Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  ISO A2/A3 (420.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. 13.
Make 
 sure  the CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size   in  the Page  Attributes
dialog box—in this case,  ISO A4.14.
Confirm the print settings, and then click  MPrint to...

Using Favorites
You can register print settings as  Favorites to reuse settings from a particular job that met your expectations, or settings for
a particular page size that you will use repeatedly. Favorites
Registering a favorite for later use. You can choose the settings you have registered from a list before printing, and you can
check the settings details. Note
• You can also save the favorite settings as files. Using these files is a convenient way to print under the same
conditions on another...

3.
Click the  Page Setup tab to display the  Page Setup sheet.4.
Select and click a roll paper in the  LPaper Source  list.
5. Click  NRoll Paper Options to display the  Roll Paper Options dialog box.6.
To enable automatic cutting, click  Yes in the AAutomatic Cutting  list. If you prefer to cut the paper later yourself,
click Print Cut Guideline .
7. Click  OK to close the  Roll Paper Options dialog box.
8. Confirm the print settings and print as desired. Note
• For tips on confirming print settings,...

Cutting Roll Paper After Printing (Mac OS X)
This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to print a
cut line for manual cutting. Note
• The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the
steps below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
 
1. This sets the  BFormat for  and CPaper Size. Note
• The...

5.
Access the Page Setup pane. 6.
Select and click a roll paper in the  APaper Source list.
7. Access the Main pane. 8.
In the  AMedia Type list, select the type of paper that is loaded. Enhanced Printing Options > Other useful settings >
iPF825
Cutting Roll Paper After Printing (Mac OS X) 3
201
 

9.
Click  CSet to display the  Paper Detailed Settings  dialog box.10.
To enable  automatic  cutting,  click  Printer  Default  in  the HAutomatic  Cutting  list.  If  you  prefer  to  cut  the  paper
later yourself, click  Print Cut Guideline. Important
• If 
the  automatic  cut  function  has  been  deactivated  on  the  printer,  change  the  auto  cut  setting  on  the
printer Control Panel.
11. Click OK to close the  Paper Detailed Settings dialog box.
12. Confirm the print settings, and then click...

2.
Select the printer, and then display the printer properties dialog box. 3.
Click the  Device Settings tab to display the  Device Settings sheet. 4.
Select the  AAutomatically switch paper sources (paper size priority)  check box.
5. Click  CAcquire Status.
The 
paper size information is acquired from the printer, and the width of the roll paper that is actually loaded in the
printer is displayed. Enhanced Printing Options 
> Other useful settings >
iPF825
Switching the Paper Source of Roll Paper to...

6.
Click  OK to close the dialog box.
7. Choose Print in the application menu.
8. Select the printer in the dialog box, and then display the printer driver dialog box. (See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows) →P.216
")
9. Click the  Page Setup tab to display the  Page Setup sheet.10.
Click Roll Paper (Auto) in the  LPaper Source list.
11. Select the  KRotate Page 90 degrees
 (Conserve Paper) check box as necessary.Note
• When  Rotate 
 Page  90  degrees...