Canon Imageprograf Ipf825 User Guide

Printing Originals Centered on Sheets (Mac OS X)
This topic describes how to center originals for printing on sheets, based on the following example. •Document: Any Type
• Page size: A4
• Paper: Sheets
• Paper type: Plain Paper
• Paper size: Non-standard
 
1. This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening...

4.
If you  configured  the  settings  using  the  Page  Attributes  dialog  box,  click FOK  to  close  the  dialog  box,  and  then
select  Print from the application software menu.
5. Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
Enhanced Printing Options 
> Centering originals >
Printing Originals Centered on Sheets...

9.
Access the Page Setup pane. 10.
Click Cut Sheet in the  APaper Source  list.
11. Make 
sure  the CPage  Size  setting  matches  the  original  size  as  selected  in  CPaper  Size   in  the Page  Attributes
dialog box—in this case,  ISO A4 - Cut Sheet.12.
Select the  JPrint Centered check box.
13. Confirm the print settings, and then click  MPrint to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.435
"
Enhanced Printing Options 
>...

Important
• If you  have  selected  Cut  Sheet  as  the  paper  source,  follow  the  instructions  on  the  printer  control  panel  to
enter the paper size.
Enhanced Printing Options 
> Centering originals >
Printing Originals Centered on Sheets (Mac OS X)
iPF8253
168
 

Conserving roll paper
Conserving Roll Paper by Rotating Originals 90 Degrees ..............................................................................169
Conserving Roll Paper by Rotating Originals 90 Degrees (Windows) ........................................................169
Conserving Roll Paper by Rotating Originals 90 Degrees (Mac OS X) ......................................................171
 
Conserving Roll Paper by Printing Originals Without Top and Bottom Margins...

This example illustrates how to rotate an A4 (210.0×297.0 mm)/Letter (8.3×11.7 in) original in portrait orientation 90 de-
grees to fit within the width of A3/A4 roll paper (297.0 mm [11.7 in]), which enables you to conserve paper.
1. Choose Print in the application menu.
2. Select 
the printer in the dialog box, and then open the printer driver dialog box.(See " Accessing the Printer Driver
Dialog Box from Applications (Windows) →P.216
")
3. Make sure the Main  sheet is displayed.4.
In the...

5.
Click the  Page Setup tab to display the  Page Setup sheet.6.
In the  APage  Size   list,  click  the  size  of  the  original  as  specified  in  the  application.  In  this  case,  click  ISO  A4  or
Letter (8.5"x11").
7. Select and click a roll paper in the  LPaper Source  list.
8. Select the width of the loaded roll in the  MRoll Paper Width list—in this case,  ISO A3/A4 Roll (297.0mm).
9. Select the  KRotate Page 90 degrees (Conserve Paper)  check box.
10. Confirm the print settings and...

This example illustrates how to rotate an A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) original in portrait orientation 90
degrees to fit within the width of A3/A4 roll (297.0 mm [11.7 in]), which enables you to conserve paper.
 
1. This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog...

5.
Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
7. Access the  Page Setup pane. 8.
Select and click a roll paper in the  APaper Source  list.Enhanced Printing Options > Conserving roll paper >
iPF825
Conserving Roll Paper by Rotating Originals 90 Degrees (Mac OS X) 3
173
 

9.
Make sure the width of the loaded roll is displayed in  BRoll Width —in this case,  ISO A3/A4 (297.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. 10.
Make 
 sure  the CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size   in  the Page  Attributes
dialog box—in this case,  ISO A4.11.
Select the  LRotate Page 90 degrees  check box.
Enhanced Printing...