Canon Imageprograf Ipf825 Mfp M40 User Guide

3.
The Plotter Configuration Editor dialog box opens. Perform the settings that you need for the print job.
Click the  OK button to close the  Plotter Configuration Editor  dialog box. Note
• For more  details  about  how  to  perform  the  settings  in  the  Plotter  Configuration  Editor  dialog  box,
see "Plotter Configuration Editor Dialog Box ." →P.371Windows Software 
> HDI Driver >
iPF815
Printing 4
385
 

4.
The Plot dialog box opens.
Perform the settings that you need on the  Plot dialog box, then click the OK button. Note
• The content  of  the  settings  done  in  the  Plotter  Configuration  Editor  dialog  box  are  reflected  in  the
Paper size settings on the  Plot dialog box.
• For more details about the  Plot dialog box, please refer to the AutoCAD manual.
5. The print job begins. Note
• If 
the  output  exceeds  the  number  of  pixels  prescribed  for  the  media,  in  order  to  prevent...

Status Monitor
The Features of imagePROGRAF Status Monitor .......................................................................................... 387
Job Management Using imagePROGRAF Status Monitor
..............................................................................388The Features of imagePROGRAF Status Monitor
imagePROGRAF Status Monitor is a utility for checking the printer status and managing print jobs.
Two screens are available in imagePROGRAF Status Monitor :  Printer List shows a...

•
If a printer error occurs, you can investigate the corrective action immediately.
• Printer status can be checked in real time on a computer monitor.
• Displays 
the  ink  level  of  every  color  in  the  printer.  An  icon  and  warning  message  will  notify  you  when  ink  levels  are
low.
• The type of paper loaded in each media source is identified. You can also check to see if paper has run out.
• This way, the utility enables you to check printer information and take care of printer...

Pausing/Resuming Print Jobs
Selecting a print job and clicking the  Pause button pauses printing of the selected job.
To resume printing of a paused print job, select the print job and click the  Resume button.Note
• Once all the print data for a print job has been sent to the printer, the job can no longer be paused/resumed. Canceling Print Jobs
Selecting a print job and clicking the 
Cancel Job button cancels printing of the selected job.Note
• You cannot cancel other users' print jobs. Windows...

Accounting
Accounting Manager ....................................................................................................................................... 390
Launching the Accounting Manager ................................................................................................................ 391
Accounting Manager Main Window ................................................................................................................. 391
 
Accounting Manager Basic Procedures...

Launching the Accounting Manager
The procedure for launching the Accounting Manager is shown below.
1. Open the imagePROGRAF Status Monitor window.
2. Select Accounting in the  Accounting menu.
Or, open the Accounting sheet and click the  Accounting button.Accounting Manager Main Window
The Accounting Manager main window consists of a title bar, menu bar, toolbars, listed job selection area, job list area,
totals area and status bar. Windows Software > Accounting >
iPF815
Launching the Accounting Manager...

Title Bar
This displays the printer model, its serial number and the port number it is using. Menu Bar
Allows you to select the menu options required for operation. Toolbars
Provide tool buttons and pull-down menus for the main operations.
Note
• You can opt to either show or hide the toolbars in the  View menu.Listed Job Selection Area
You can use this area to select which job log is displayed.
If you are using regular data acquisition, this area allows you to view the collective job logs for each...

It displays a list of either the print jobs on the printers or the regularly acquired print jobs. The displayed information in-
cludes the amounts of paper and ink consumed, the costs, the media type and the time taken for printing.
Note
• If the Unit Cost of Ink or Paper have not been set,  **** is displayed in the Job Cost field.Totals Area
Displays the total costs for the selected job and the amounts of paper and ink consumed. Note
• If you are viewing regularly acquired print jobs, selecting a period...

Status Bar
Displays messages and other information. Accounting Manager Basic Procedures
The first time you use the Accounting Manager, use the following procedures to configure the settings.
1. Configure unit costs, including the costs of ink and paper.
For details of the unit cost settings, see  Configuring Unit Costs in Accounting Manager →P.394
.
2. Set options such as the units displayed.
For details of the unit settings, see  Configuring Units and Display Settings in Accounting Manager →P.398
.
3....