Canon Imageprograf Ipf825 Mfp M40 User Guide

2.
Move the slider for each item to the left or right to adjust the settings. Setting
Details
Raster and Shaded/Rendered
Viewports Use these settings to adjust the balance between print quality, memory consump-
tion, and the print speed. If set to  None, you cannot print raster images. Printing
time will take longer the higher you set the  Best setting.
OLE Use these settings to adjust the balance between print quality, memory consump-
tion and the print speed when printing a OLE object. If set to  None,...

Setting
Details
Lines Merge Where the lines intersect, the line colors merge.2.
Click the  OK button. Opening the Custom Properties Dialog Box
Follow the procedure below to open the  Custom Properties dialog box.
1. In the Plotter Configuration Editor  dialog box, select and open the Device and Document Settings sheet. Note
• For more details about how to open the  Plotter Configuration Editor dialog box,  see "Opening the
Plotter Configuration Dialog Box ." →P.367
.
2. Click  Custom Properties....

4.
The Custom Properties dialog box opens. Windows Software > HDI Driver >
iPF815
Opening the Custom Properties Dialog Box 4
377
 

Custom Properties dialog box
You can perform the settings for the media type, color matching, brightness, and other settings.
Media Type
This allows you to select the media type. Note
• Always select  media  type  that  is  actually  set  in  the  printer.  When  the  media  you  chose  is  different  from  the
media set in the printer, you may not receive the desired print results. Print Priority
Select a print quality to suit the print job. Setting
Details
Image This mode achieves the best results for...

Print Quality
Select a print quality to suit the print job. Setting
Details
Highest Gives priority to the highest possible image quality.
High Prints images of high quality.
Standard Balances quality with the need for faster printing.
Draft Gives priority to high speed printing.Note
• The availability of settings is determined by the media type and print priority selections. Color Mode
You can select a color mode to suit the print job.
Setting
Details
Color Enables color printing.
Monochrome Disables...

Adj. Pale Color Recognizable
When you place a checkmark here, yellow or cyan lines or other portions of images that are difficult to see when printed in
white space can become easier to see. Economy Printing
You can reduce the amount of ink consumed for printing by placing a checkmark here. Increase image print speed (AutoCAD2011 only)
When you print with the resolution configured to 600dpi, you can print data including raster images even faster.
However, image quality may deteriorate if high-resolution...

Note
• The settings in the  Paper Detailed Settings dialog box are temporary; after the print job finishes the settings
of the printer operation panel are restored. Drying Time
Between Pages
This sets the wait time for the ink to dry between each completely printed sheet and the output of the sheet. Setting
Details
Printer Default The settings of the printer operating panel are applied.
None The paper is ejected immediately after printing.
30sec. / 1min. / 3min. /  5min. /
10min. / 30min. / 60min. The...

Setting
Details
Printer Default The settings of the printer operating panel are applied.
Fast Select this setting if cutting with the Standard setting is not clean.
Standard Select this setting when you are not experiencing problems.
Slow Select this setting if cutting with the Standard setting is not clean. Output Method Dialog Box
Output Method dialog box appears when you click  Output Method button on the Main sheet in the Custom Properties
dialog box. You can specify the output method for HDI Driver....

Important
• The color and quality of the specified model cannot be perfectly matched. Color Compatibility
Color settings and compatible models are listed below. Color settings
Compatible models
Color (CAD) 1 Standard
Color (CAD) 2 Color (CAD) Light
Color (CAD) 3 Canon BJ-W3000/W3050 （BJ-W3000/W3050 are not sold domestically in Japan. ）
Color (CAD) 4 HP Designjet 500/800
Color (CAD) 5 HP Designjet 1000
Color (CAD) 6 HP Designjet 4000/4500Printing
This section describes how to execute a print job with the...

2.
Select  Plot from the  File menu. The  Plot dialog box opens.
Check  the Name  setting  under  Printer/plotter  and  confirm  that  iPFxxxx.pc3  (the  name  of  the  printer  you  use)  is
displayed.
Click the  Properties  button. Note
• If 
any  other  printer  name  is  selected,  select  the  name  of  the  printer  that  you  want  to  use  from  the
Name list.
• The names of the printers installed when the HDI driver was installed are in the  Name list.
Windows Software 
> HDI Driver >
Printing...