Canon Imageprograf Ipf825 Mfp M40 User Guide

2.
If Start imagePROGRAF Print Plug-In  is displayed, click it.3.
Click  Print from the imagePROGRAF Print Plug-In  toolbar/ribbon.
The  Printing Wizard dialog box is displayed. Important
• If you  want  to  change  the  display  to  another  file  or  application  while  the  Printing  Wizard  is  open,
close the  Printing Wizard  dialog box. Otherwise, you may not be able to change displays or operate
the toolbar/ribbon. Windows Software 
> Print Plug-In for Office >
iPF815
Multi-Page Printing...

4.
Click  Multi-Page Printing .5.
Select the  Roll Paper Width that is set in the printer.
6. Select layout from  Layout Selection.
7. Select Next. 8.
Select  Media Type.
Windows Software > Print Plug-In for Office >
Multi-Page Printing (PowerPoint)
iPF8154
336
 

9.
Select  Print Range from All Slides, Current Slide, and  Slides.
If Slides is selected, enter the slide number.
10. Enter Copies. Note
• When Print in Draft mode is selected, printing is fast but the print quality is poor.
• The 
settings are registered when the  One-Touch Registration is pressed. This is convenient if you to
need print multiple times using the same setting.
• Press  the  Print  Preview   button  to  display  the  preview  screen.  You  can  check  and  make  changes  to
the layout in...

3.
Enter name in  Name.
Up to 31 characters can be entered.
4. Click  . The name you entered is displayed in 
Registered Settings.
5. Click OK , and return to the  Print screen.
6. Click Print to print, and click  Cancel to cancel the print. Note
• Clicking  Cancel in the Print screen will not delete the registered settings. Print Using Registered Settings (PowerPoint)
Prints using the registered settings.
1. Start  Microsoft PowerPoint.
2. If Start imagePROGRAF Print Plug-In  is displayed, click it.3....

Important
• If you  want  to  change  the  display  to  another  file  or  application  while  the  Printing  Wizard  is  open,
close the  Printing Wizard  dialog box. Otherwise, you may not be able to change displays or operate
the toolbar/ribbon.
4. Click  Print Using Registered Settings. 5.
Click the  Next button. 6.
Select Media Type . Windows Software 
> Print Plug-In for Office >
iPF815
Print Using Registered Settings (PowerPoint) 4
339
 

7.
Select  Print Range from All Slides, Current Slide, and  Slides.
If Slides is selected, enter the slide number.
8. Enter Copies. Note
• When Print in Draft mode is selected, printing is fast but the print quality is poor.
• Press 
the Print  Preview   button  to  display  the  preview  screen.  You  can  check  and  make  changes  to
the layout in the preview screen.
• The  maximum  print  length  when  printing  with  the  registered  settings  is  the  lesser  of  14.22  times  the
roll paper width,...

3.
Click  Paper Settings from the imagePROGRAF Print Plug-In  toolbar/ribbon.
The  Large-Format Printing Wizard  dialog box is displayed.Important
• If you  want  to  change  the  display  to  another  file  or  application  while  the  Large-Format  Printing
Wizard  is  open,  close  the  Large-Format  Printing  Wizard  dialog  box.  Otherwise,  you  may  not  be
able to change displays or operate the toolbar/ribbon.
4. Click  Portrait Orientation  or Landscape Orientation. Note
• The steps taken to...

5.
Adjust Length from the list-box or slide-bar.
6. Click the  Create Page button.
7. Click OK  if the message is displayed. 8.
Edit and create the document. Important
• The layout  may  collapse  if  you  create  a  form  using  existing  data.  If  that  is  the  case,  modify  the  data
again. Note
• Printing is done in  Print Matching Roll Width  
 of the Printing Wizard . For details on Print Match-
ing Roll Width, refer to see "Print Matching Roll Width (PowerPoint) ." →P.329
.
Windows...

To start from Microsoft Excel
Below are the steps to start  Print Plug-In for Office from Microsoft Excel.
1. Start Microsoft Excel .
2. If Start imagePROGRAF Print Plug-In  is displayed on the toolbar/ribbon, click it.Important
• If the imagePROGRAF Print Plug-In  toolbar/ribbon is not displayed, refer to the following.
• When Print Plug-In for Office is not displayed →P.306
3. Check that the  imagePROGRAF Print Plug-In  toolbar/ribbon is displayed.4.
Click the buttons on the toolbar/ribbon according to...

Printing Wizard
 dialog box Important
• If you want to change the display to another file or application while the  Printing Wizard is open, close the
Printing  Wizard   dialog  box.  Otherwise,  you  may  not  be  able  to  change  displays  or  operate  the  toolbar/rib-
bon.
• The  Printing Wizard will not start if you click the  Print button on the toolbar/ribbon while editing a cell.
• When  more  than  one  worksheet  is  selected,  the  Printing  Wizard  cannot  be  run.  Select  only  one...