Canon Imageformula P 215ii Scan Tini User Guide

40
[Color adjustment] (Manual settings)
Move the slider to the left or right to adjust the brightness and contrast of 
the image, checking the preview image.
Click the [Grayscale] button to render the image in grayscale.
Click the [Black and White] button to render the image using 2 values: 
black and white.
When adjustment is finished, click the [OK] button. To cancel the 
adjustment, click the [Back] button.
[Image alignment]
Click [Image alignment] to display.
The preview image or the slider can be...

41
[Rotate]
Click [Rotate] to display.
The scanned image can be rotated in 90 degrees to the left or the right. 
The rotation can be adjusted according to the preview image.
(5)Information Display Area
The information regarding the Select document and Select output 
is displayed.
Click the   button, and the Output Settings dialog will appear.
Click the [Scan more pages] button to continue the scanning.
Clicking the [Cancel] button will destroy the scanned images and 
return to the top screen.
When...

42
[Color mode]
Select the color mode for scanning from below.
[Page Size]
Select the paper size of the document to be scanned.
If you specify [Match original size], the page size of the scanned document 
is detected and the images are saved at the detected size.
[Dots per inch]
Select the resolution.
Select [Detect automatically] and the software will automatically scan the 
document at the optimum resolution.
[Scanning Side]
Select the scanning side of the document.
If you select [Skip blank page],...

43
Name
Enter the name to be displayed in the select document panel.
Icon
You can change the select document icon displayed in the scan mode 
panel.
Enable [Change icon] to enable the [Settings] button and select the file.
The file formats that can be selected as icon files are described below.
 .ico, .exe, .jpg, .png
.icns, .app, .jpg, .png 
Setting the output
By default, CaptureOnTouch Lite enables the settings to converts the 
scanned images to PDF file and save to a folder.
To specify the output...

44
Save to folder
Saves the scanned image to the specified folder. When this output method 
is specified, set the save location folder.
Other output methods
CaptureOnTouch Lite supplies output methods other than [Save to folder] 
as plugins.
By installing the plug-in, you can use various services such as printing the 
scanned image or attaching it in an e-mail.
To install plugins, enable the checkbox when installing CaptureOnTouch.
The output methods that can be selected depend on the plugins that have...

45
2Click [Preferences] in the [CaptureOnTouch Lite] menu.
The [Environmental settings] dialog box appears.
You can configure the following in this dialog box.
[Maintenance]Tab
[Initialize]
Return all settings to their default condition.
 

46
Chapter 7 Scanning with 
CaptureOnTouch
Chapter 7 Scanning with CaptureOnTouchThis section describes the 
scanning procedure when using CaptureOnTouch.
What is CaptureOnTouch? ................................................................. 46
Starting and Exiting CaptureOnTouch.............................................. 47
Screen Descriptions ........................................................................... 49
Standard Scanning...

47
Turn OFF the Auto Start switch on the rear of the scanner, and use the 
supplied USB cable to connect the scanner to the computer. For details, 
see Connecting the Scanner to the Computer24.
CaptureOnTouch supports the following scanning methods.
Standard Scanning
Click the Select document and Output panels, and then click the [Scan] 
button to scan the document. You can select the scan method according 
to the document type and purpose of use before scanning.
-> Standard Scanning
Scanning Shortcut...

48
The interval between the time you press the Start button on the 
scanner and the time scanning begins is shortened when the 
[Make CaptureOnTouch resident] check box is selected in the 
[Basic settings] tab of the [Environmental settings] dialog box. 
For details, see Environmental Settings65.
Exiting CaptureOnTouch
To close the CaptureOnTouch window, click   at the top of the window. 
This closes the window, but CaptureOnTouch will continue to reside in the 
system.
To quit the CaptureOnTouch...

49
In Windows 8.1 / 8, it is registered in the following location.
Open [GO] - [Applications] folder from the Finder, and double-click 
[CaptureOnTouch P-xxx].
Press the Start button on the scanner (in this case, the main screen 
of CaptureOnTouch will open and scanning will start using the scan 
method assigned to the Start button).
If you are using OS X 10.9, CaptureOnTouch will not start when the 
[Start] button is pressed.
Open [GO] - [Applications] folder from the Finder, and double-click...