Canon Imageformula P 215ii Scan Tini User Guide

90
Select the [Text Orientation Recognition] check box. The text orientation 
on each page is detected, and the scanned image is rotated in 90-degree 
increments to correct the orientation.
Practical Examples
When you want to rotate the images of a document placed 
horizontally to correct the orientation
Specify the rotation angle in [Document Orientation] on the [Others] tab.
When the [Text Orientation Recognition] check box is selected, 
[Document Orientation] is unavailable.
 

91
Click [Image processing] and specify the rotation angle in [Document 
Orientation] in the dialog box which appears.
Practical Examples
How to scan both sides of a card as an image on one sheet of 
paper
If you want to scan the front and back of a card in a single scan, in the 
[Feeding] tab, click the [Combine Front & Back Card Images] check box to 
ON.  
For directions on how to feed a card into the scanner, refer to Loading 
cards on p.30.
Brightness, contrast, and other settings can be individually...

92
Practical Examples
When you want to set the scanner conditions automatically
Set [Full Automatic Mode] in [User Preference] to scan with scanning 
conditions that match the document.
For a landscape card, the image is oriented so that the 
lettering on both sides is in the same direction.
For a portrait card, the lettering on each side is oriented in 
opposite directions. 
 

93
Set [Full Automatic Mode] in [Favorite Settings] to scan with scanning 
conditions that match the document.
Practical Examples
When you want to use multistream settings for scanning
Multistream settings allow you to output multiple different scanned images 
with a single scan operation, and output scanned images with different 
scanning conditions for each of the front and back pages.
The multistream settings can only be used in Windows.
Depending on the application program, these settings may not...

94
1When you want to specify different scanning conditions for the front 
and back pages of a document, select [Skip blank page] or [Duplex] 
for [Scanning Side] on the [Basic] tab in advance.
2Specify the number of scanning conditions to apply in [Stream count 
of Front]. Up to three can be specified.
3Select [Front 1st], and then open the other tabs and set the scanning 
conditions. Depending on the value specified for [Stream count of 
Front], configure the remaining [Front 2nd] and [Front 3rd] in the...

95
When you finish configuring a setting, select [Add/Delete] of [Favorite 
Settings] to save the setting.
Clicking the [Add] button registers the current setting to [Favorite Setting 
List]. Use the [Delete] button to delete a setting from the list.
The preregistered [Full Automatic Mode] cannot be deleted from 
[Favorite Setting List].
 

96
Chapter 10 Regular Maintenance
Clean the scanner and perform maintenance on a regular basis as 
described below to maintain peak scanning quality.
Cleaning the Scanner ......................................................................... 96
Cleaning the Scanning Glass and the Rollers ................................. 97
When cleaning the scanner and the inside of the scanner, turn the 
power OFF and disconnect the power cord from the power outlet.
Do not use spray cleaners to clean the scanner....

97
Cleaning the Scanning Glass and the Rollers
If scanned images contain streaks, or if the scanned documents 
become dirty, the scanning glass or rollers inside the scanner may 
be dirty. Clean them periodically.
1Open the feed tray.
2Open the feeder cover.
3Use compressed air to remove dust and paper particles from the 
inside of the scanner.
4Remove any dirt from the scanning glass, separation pad and rollers 
inside the scanner (parts   shown in the figure).
Use a clean dry cloth to wipe off any dirt...

98
Chapter 11 Detaching and attaching 
the feed roller and separation pad
When replacing the separation pad, perform the following steps to detach 
it from and attach it to the unit. 
Replacing Consumable Parts ............................................................ 98
Detaching and attaching the Feed Roller ....................................... 100
Detaching and attaching the separation pad ................................. 101
Resetting the Counters...

99
Separation Pad: 10,000 sheets
Furthermore, the counter in the scanner that records the number of pages 
fed also needs to be reset when you replace the rollers.
This message only serves as a rough guide for when to replace the 
feed roller and separation pad.
They may wear out sooner if, for example, a lot of pages with rough 
surfaces are scanned.