Canon Imageformula P 215ii Scan Tini User Guide

30
If double-feeding occurs, reduce the number of pages that you load 
into the scanner at one time.
When scanning small size of multiple documents such as receipt, use 
documents which have the same width.
Depending on paper quality, you may hear unusual noises while 
scanning some documents, but this does not indicate a malfunction.
Loading cards
Use the card slot when scanning plastic cards. Use the following 
procedure to scan the cards one by one.
1Open the document feed tray.
2Turn the card face...

31
Setting the Long Document Mode
Setting the Long Document ModeThe length of documents that can be 
scanned with the scanner is normally 356 mm (14), but you can 
scan documents up to 1,000 mm (39.4) long by setting the scanner 
to the Long Document mode.
By selecting the Long Document mode and setting the [Page Size] on the 
scanner driver settings screen to auto-detection, documents of up to 
1,000 mm (39.4) in length can be scanned. Note the following when using 
the Long Document mode:
●When...

32
4Click [OK].
1Opens the scanner drivers Detail Settings screen.
See Select document settings on page 60.
2Click   to display the [Scanner Information] dialog box.
The [Scanner Information] dialog box appears.
3Click [Maintenance].
The [Maintenance] dialog box appears.
4Select [Long Document mode (1,000 mm)].
5Click   to close the dialog box.
 

33
Chapter 6 Scanning with 
CaptureOnTouch Lite
This section describes how to scan when using CaptureOnTouch Lite.
Scanning with CaptureOnTouch Lite ................................................ 33
Starting and Exiting CaptureOnTouch Lite ...................................... 37
Operations for the scanned image edit window .............................. 38
Select document settings .................................................................. 41
Setting the output...

34
2Open the feed tray, turn ON the scanner, and then load the document.
For details, Loading a document.
When you open the feed tray, the Start button on the scanner lights and the 
auto play screen appears.
If you are using Windows XP and you set the Auto Start switch to ON 
before connecting the scanner to the computer, a message requesting 
that you restart your computer may appear when you turn ON the scanner. 
You can continue normal use even if you click [No] and do not restart the 
computer....

35
3Double-click the [CaptureOnTouch Lite Launcher] icon.
The selected [Select document] panel will be displayed in orange. To edit the 
[Select document] panel, see Select document settings.
4Click the output panel for the scan image application from [2 Output].
The selected [Select document] panel will be displayed in orange. To edit the 
[Output] panel, see Setting the output.
5Click the [SCAN] button.
The document is scanned. While scanning is in progress, the number of pages 
scanned is displayed in...

36
If scanning continuously, set the next document, and click the [Scan 
more pages] button to start the document scan.
6After confirming the scanned image, click the [Finish] button.
 
To edit scan images, see [Operations for the scanned image edit window].
Click the [   ] button to edit the output settings. 
Setting the output
Click the [Cancel] button to discard the scanned image and return to the main 
window.
7When the output has finished, a popup window will be displayed. If 
saving the scanned...

37
Starting and Exiting CaptureOnTouch Lite
Once you start CaptureOnTouch Lite it remains present in the 
system.
When the Auto Start switch on the rear of the scanner is not in the 
ON position, CaptureOnTouch Lite will not start. For details, refer to 
Connecting the Scanner to the Computer
Double-click   (CaptureOnTouch icon) in the taskbar to start 
CaptureOnTouch and display the main window.
To close the CaptureOnTouch Lite window, click   at the top of the 
window. This closes the window, but...

38
2Drag and drop the [ONTOUCHLITE] folder and [CaptureOnTouch Lite 
for Mac] folder onto the [Trash] icon.
3Close the feed tray.
The scanner turns OFF.
4Disconnect the USB cable from the scanner and computer.
Operations for the scanned image edit 
window
When scanning has finished, a preview window of the scanned 
image will be displayed.
To display the edit window in the preview window, click   on the tool bar.
Scanned image preview screen
(1)Toolbar
This tool bar enables operations to thumbnails and...

39
(2)Thumbnail Display Area
Thumbnails of the scanned documents will be displayed. You can 
implement the following operations.
Click a thumbnail to display a preview of the scanned image in the 
preview window.
Drag a thumbnail to change pages.
(3)Preview Area
The preview images of scanned documents are displayed.
(4)Edit window
You can edit scanned documents.
Click an item to open the edit window.
Click the [Restore] button to discard the edit results and return to the 
previous scan image.
[Color...