Canon Imageformula Dr M160ii User Guide
Here you can view all the pages of manual Canon Imageformula Dr M160ii User Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
3Open the [Feeding] tab.
4Select the [Non Separation Feeding Mode] check box.
5Click the [OK] button to close the settings screen.
1Opens the scanner drivers Detail Settings screen. (See
p. 47)
2Set the [Paper Size] to half the size of the document (or
[Detect automatically] when scanning nonstandard
document).
3Set [Scanning Side] to [Folio].
4Click the [More] button.
The scanner drivers Detail Settings screen opens.
5Select the [Non Separation Feeding Mode] check box.
6Click to close the dialog...](http://img.usermanuals.tech/thumb/14/56348/w300_canon_imageformula_dr-m160ii-user-guide-30.png "Page 31
31
3Open the [Feeding] tab.
4Select the [Non Separation Feeding Mode] check box.
5Click the [OK] button to close the settings screen.
1Opens the scanner drivers Detail Settings screen. (See
p. 47)
2Set the [Paper Size] to half the size of the document (or
[Detect automatically] when scanning nonstandard
document).
3Set [Scanning Side] to [Folio].
4Click the [More] button.
The scanner drivers Detail Settings screen opens.
5Select the [Non Separation Feeding Mode] check box.
6Click to close the dialog...")
31 3Open the [Feeding] tab. 4Select the [Non Separation Feeding Mode] check box. 5Click the [OK] button to close the settings screen. 1Opens the scanner drivers Detail Settings screen. (See p. 47) 2Set the [Paper Size] to half the size of the document (or [Detect automatically] when scanning nonstandard document). 3Set [Scanning Side] to [Folio]. 4Click the [More] button. The scanner drivers Detail Settings screen opens. 5Select the [Non Separation Feeding Mode] check box. 6Click to close the dialog...
Page 32
![Page 32
32
Setting the Long Document Mode
The length of documents that can be scanned with the scanner is
normally 356 mm (14), but you can scan documents up to 3,000 mm
(118.1) long by setting the scanner to the Long Document mode.
IMPORTANT
By selecting the Long Document mode and setting the [Paper Size]
on the scanner driver settings screen to Auto-detection, documents
of up to 3,000 mm (118.1) in length can be scanned. Note the
following when using the Long Document mode:
When scanning in the Long...](http://img.usermanuals.tech/thumb/14/56348/w300_canon_imageformula_dr-m160ii-user-guide-31.png "Page 32
32
Setting the Long Document Mode
The length of documents that can be scanned with the scanner is
normally 356 mm (14), but you can scan documents up to 3,000 mm
(118.1) long by setting the scanner to the Long Document mode.
IMPORTANT
By selecting the Long Document mode and setting the [Paper Size]
on the scanner driver settings screen to Auto-detection, documents
of up to 3,000 mm (118.1) in length can be scanned. Note the
following when using the Long Document mode:
When scanning in the Long...")
32 Setting the Long Document Mode The length of documents that can be scanned with the scanner is normally 356 mm (14), but you can scan documents up to 3,000 mm (118.1) long by setting the scanner to the Long Document mode. IMPORTANT By selecting the Long Document mode and setting the [Paper Size] on the scanner driver settings screen to Auto-detection, documents of up to 3,000 mm (118.1) in length can be scanned. Note the following when using the Long Document mode: When scanning in the Long...
Page 33
![Page 33
33
2Click [CANON DR-M160 USB] and click [Properties].
Scanner properties are displayed.
3Click the [Maintenance] tab, and then select a Long
Document mode.
Select [Long Document Mode (1000 mm)] or [Long Document
Mode (3000 mm)] depending on the length of the document.
4Click [OK].
1Opens the scanner drivers Detail Settings screen. (See
p. 47)
2Click to display the [Scanner Information] dialog box.
The [Scanner Information] dialog box appears.
3Click [Maintenance].
The [Maintenance] dialog box...](http://img.usermanuals.tech/thumb/14/56348/w300_canon_imageformula_dr-m160ii-user-guide-32.png "Page 33
33
2Click [CANON DR-M160 USB] and click [Properties].
Scanner properties are displayed.
3Click the [Maintenance] tab, and then select a Long
Document mode.
Select [Long Document Mode (1000 mm)] or [Long Document
Mode (3000 mm)] depending on the length of the document.
4Click [OK].
1Opens the scanner drivers Detail Settings screen. (See
p. 47)
2Click to display the [Scanner Information] dialog box.
The [Scanner Information] dialog box appears.
3Click [Maintenance].
The [Maintenance] dialog box...")
33 2Click [CANON DR-M160 USB] and click [Properties]. Scanner properties are displayed. 3Click the [Maintenance] tab, and then select a Long Document mode. Select [Long Document Mode (1000 mm)] or [Long Document Mode (3000 mm)] depending on the length of the document. 4Click [OK]. 1Opens the scanner drivers Detail Settings screen. (See p. 47) 2Click to display the [Scanner Information] dialog box. The [Scanner Information] dialog box appears. 3Click [Maintenance]. The [Maintenance] dialog box...
Page 34
34 Detecting a document double feed This scanner includes a function to detect document double feeds. By using this function, the scanner will automatically stop when it detects that multiple documents have been fed at the same time. You can also specify whether to save the scanned image after scanning has finished and continue scanning the document (double feed detection ignore function). To use the double feed detection function, you must first open the scanner driver settings screen and enable...
Page 35
![Page 35
35
1Opens the scanner drivers Detail Settings screen. (See
p. 47)
2Select the [Double Feed Detection] check box, and then
select any one of [Detect by Ultrasonic], [Detect by
Length], and [Detect by Ultrasonic and Length].
3Click the [More] button when the Double Feed Detection
Ignore function is also used.
The scanner drivers Detail Settings screen opens.
4Select the [Rapid recovery system] check box.
5Click to close the dialog box.
What to do when a double feed is
detected
When not using the...](http://img.usermanuals.tech/thumb/14/56348/w300_canon_imageformula_dr-m160ii-user-guide-34.png "Page 35
35
1Opens the scanner drivers Detail Settings screen. (See
p. 47)
2Select the [Double Feed Detection] check box, and then
select any one of [Detect by Ultrasonic], [Detect by
Length], and [Detect by Ultrasonic and Length].
3Click the [More] button when the Double Feed Detection
Ignore function is also used.
The scanner drivers Detail Settings screen opens.
4Select the [Rapid recovery system] check box.
5Click to close the dialog box.
What to do when a double feed is
detected
When not using the...")
35 1Opens the scanner drivers Detail Settings screen. (See p. 47) 2Select the [Double Feed Detection] check box, and then select any one of [Detect by Ultrasonic], [Detect by Length], and [Detect by Ultrasonic and Length]. 3Click the [More] button when the Double Feed Detection Ignore function is also used. The scanner drivers Detail Settings screen opens. 4Select the [Rapid recovery system] check box. 5Click to close the dialog box. What to do when a double feed is detected When not using the...
Page 36
![Page 36
36
When using the double feed detection ignore function
If a document double feed is detected during scanning, document
feeding stops when the double fed documents are ejected. The
following error code is displayed in the Job No. Indicator of the
operating panel, and the DFR button lights.
Also, the [Rapid Recovery System] screen appears to enable you to
specify whether to continue scanning.
Double feed detection error code
Buttons of
[Rapid Recovery
System] ScreenButtons of
Operating...](http://img.usermanuals.tech/thumb/14/56348/w300_canon_imageformula_dr-m160ii-user-guide-35.png "Page 36
36
When using the double feed detection ignore function
If a document double feed is detected during scanning, document
feeding stops when the double fed documents are ejected. The
following error code is displayed in the Job No. Indicator of the
operating panel, and the DFR button lights.
Also, the [Rapid Recovery System] screen appears to enable you to
specify whether to continue scanning.
Double feed detection error code
Buttons of
[Rapid Recovery
System] ScreenButtons of
Operating...")
36 When using the double feed detection ignore function If a document double feed is detected during scanning, document feeding stops when the double fed documents are ejected. The following error code is displayed in the Job No. Indicator of the operating panel, and the DFR button lights. Also, the [Rapid Recovery System] screen appears to enable you to specify whether to continue scanning. Double feed detection error code Buttons of [Rapid Recovery System] ScreenButtons of Operating...
Page 37
![Page 37
37
Double Feed Retry
When a double feed has occurred, this function returns the document
to the document feeder and re-feeds the pages (double feed retry).
It is necessary to first open the scanner driver settings screen, and
then enable the ultrasonic double feed detection and the double feed
retry functions.
Setting procedure
1Opens the scanner drivers Detail Settings screen. (See
p. 57)
2Click the [Feeding] tab.
3Select the [Detect by Ultrasonic] check box.
4Click the [Settings] button.
5Select...](http://img.usermanuals.tech/thumb/14/56348/w300_canon_imageformula_dr-m160ii-user-guide-36.png "Page 37
37
Double Feed Retry
When a double feed has occurred, this function returns the document
to the document feeder and re-feeds the pages (double feed retry).
It is necessary to first open the scanner driver settings screen, and
then enable the ultrasonic double feed detection and the double feed
retry functions.
Setting procedure
1Opens the scanner drivers Detail Settings screen. (See
p. 57)
2Click the [Feeding] tab.
3Select the [Detect by Ultrasonic] check box.
4Click the [Settings] button.
5Select...")
37 Double Feed Retry When a double feed has occurred, this function returns the document to the document feeder and re-feeds the pages (double feed retry). It is necessary to first open the scanner driver settings screen, and then enable the ultrasonic double feed detection and the double feed retry functions. Setting procedure 1Opens the scanner drivers Detail Settings screen. (See p. 57) 2Click the [Feeding] tab. 3Select the [Detect by Ultrasonic] check box. 4Click the [Settings] button. 5Select...
Page 38
38 Scanning methods Scanning with CaptureOnTouch What is CaptureOnTouch? CaptureOnTouch is a scanning application that allows you to scan a document with a simple operation by following the instructions on the screen. CaptureOnTouch is provided with multiple scanning methods that can be selected according to the purpose and application. Scan First Scan a document and then select the output method. This method allows you to easily scan a document by just following the instructions on the screen....
Page 39
![Page 39
39
Hint
You can also start CaptureOnTouch from the Start menu. Click
[Start] – [All Programs] – [Canon DR-M160] – [DR-M160
CaptureOnTouch].
When [Make CaptureOnTouch resident] is turned on by using the
[Basic settings] tab on the [Environmental settings], this shortens
the time from pressing the scanner start button to the start of
scanning. For details, see “Environmental Settings” on p. 51.
Click (CaptureOnTouch icon) in the menu bar and then click
[Launch CaptureOnTouch] from the menu which...](http://img.usermanuals.tech/thumb/14/56348/w300_canon_imageformula_dr-m160ii-user-guide-38.png "Page 39
39
Hint
You can also start CaptureOnTouch from the Start menu. Click
[Start] – [All Programs] – [Canon DR-M160] – [DR-M160
CaptureOnTouch].
When [Make CaptureOnTouch resident] is turned on by using the
[Basic settings] tab on the [Environmental settings], this shortens
the time from pressing the scanner start button to the start of
scanning. For details, see “Environmental Settings” on p. 51.
Click (CaptureOnTouch icon) in the menu bar and then click
[Launch CaptureOnTouch] from the menu which...")
39 Hint You can also start CaptureOnTouch from the Start menu. Click [Start] – [All Programs] – [Canon DR-M160] – [DR-M160 CaptureOnTouch]. When [Make CaptureOnTouch resident] is turned on by using the [Basic settings] tab on the [Environmental settings], this shortens the time from pressing the scanner start button to the start of scanning. For details, see “Environmental Settings” on p. 51. Click (CaptureOnTouch icon) in the menu bar and then click [Launch CaptureOnTouch] from the menu which...
Page 40
![Page 40
40
Restarting CaptureOnTouch
To use CaptureOnTouch after it is no longer resident in the system,
restart it by following the procedure below. CaptureOnTouch will start
and become resident in the system again.
Click [Start] – [All Programs] – [Canon DR-M160] – [DR-M160
CaptureOnTouch].
Hint
In Windows 8.1/8, it is registered at the following location.
Open [GO] - [Applications] folder from the Finder, and double-click
[CaptureOnTouch DR-M160].
Scan First
Scan a document and then select the output...](http://img.usermanuals.tech/thumb/14/56348/w300_canon_imageformula_dr-m160ii-user-guide-39.png "Page 40
40
Restarting CaptureOnTouch
To use CaptureOnTouch after it is no longer resident in the system,
restart it by following the procedure below. CaptureOnTouch will start
and become resident in the system again.
Click [Start] – [All Programs] – [Canon DR-M160] – [DR-M160
CaptureOnTouch].
Hint
In Windows 8.1/8, it is registered at the following location.
Open [GO] - [Applications] folder from the Finder, and double-click
[CaptureOnTouch DR-M160].
Scan First
Scan a document and then select the output...")
40 Restarting CaptureOnTouch To use CaptureOnTouch after it is no longer resident in the system, restart it by following the procedure below. CaptureOnTouch will start and become resident in the system again. Click [Start] – [All Programs] – [Canon DR-M160] – [DR-M160 CaptureOnTouch]. Hint In Windows 8.1/8, it is registered at the following location. Open [GO] - [Applications] folder from the Finder, and double-click [CaptureOnTouch DR-M160]. Scan First Scan a document and then select the output...