Canon Imageformula Dr M160ii User Guide

11
STEP 4Turning the Power ON
The power of the scanner can be turned ON and OFF with the power 
button on the front of the scanner.
1Make sure that the scanner and computer are connected 
properly.
2Press the power button.
The power button lights blue when the power turns ON.
Hint
A balloon message such as shown below appears on the task bar. If 
you wait a while, automatic scanner recognition will end and the 
scanner will become ready to use.
Ð
When the scanner is properly connected to the computer,...

12
Introduction
Thank you for purchasing the Canon imageFORMULA DR-M160II 
Document Scanner. 
Please read the following manuals carefully and familiarize yourself 
with the functions of the scanner before use to ensure you sufficiently 
understand the functions and make the most of the scanner’s 
capabilities. After reading the manuals, store them in a safe place for 
future reference.
Manuals for the Scanner
In DR-M160II driver and application software, the product name 
appears as DR-M160....

13
Hint
In Windows 8.1/8, it is registered at the following location.Symbols Used in This Manual
The following symbols are used in this manual to explain procedures, 
restrictions, handling precautions, and instructions that should be 
observed for safety.
WARNING
Indicates a warning concerning operations that may lead to death 
or injury to persons if not performed correctly. To use the scanner 
safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may...

14
Table of Contents
Setup Guide ......................................................................... 4
Introduction ....................................................................... 12
Symbols Used in This Manual .................................................... 13
Before Using the Scanner .......................... 15
Important Safety Instructions .....................................  15
Installation Location .............................................................. 15
AC...

15
Before Using the Scanner
Important Safety Instructions
To ensure the safe operation of this scanner, be sure to read the 
safety warnings and precautions described below.
Installation Location
The performance of this scanner is affected by the environment in 
which it is installed. Make sure that the location where the scanner is 
installed meets the following environmental requirements.
●Provide adequate space around the scanner for operation, 
maintenance, and ventilation.
●Provide adequate space in...

16
Moving the Scanner
●When moving the scanner, always hold it with both hands to avoid 
dropping it.
●Make sure to disconnect the interface cable and AC adapter before 
moving the scanner. If the scanner is transported with these items 
connected, the plugs and connectors may be damaged.
Handling
WARNING
Note the following precautions whenever using the scanner. Failure to 
do so may result in a fire or electric shock.
●Never use alcohol, benzene, paint thinner, aerosol sprays, or any 
other highly...

17
●When unplugging the power cord, grasp it firmly by its plug. Do not 
pull directly on the power cord, as this may damage or expose the 
cord’s internal wiring, resulting in a fire or electric shock.
●Leave sufficient space around the power plug so that it can be 
unplugged easily. If objects are placed around the power plug, you 
will be unable to unplug it in an emergency.
●Do not allow water or flammable substances (alcohol, paint thinner, 
benzene, etc.) to spill into the scanner, as this may...

18
Features of the Scanner
The main features of the DR-M160II document scanner are described 
below.
●Compact Design
The scanner has a compact size of 280 mm (11.02)(W) x 250 mm 
(9.84)(D) x 230 mm (9.06)(H) when the document feed is closed.
●Fast Document Feeding
Documents can be scanned at a speed of up to 60 pages per 
minute (when scanning one-sided or two-sided documents of A4 
size at 200 dpi).
●High Image Quality
The 600 dpi optical resolution sensor incorporated in the scanner 
enables documents...

19
●Prescan Function
The scanner is equipped with a Prescan function that allows you to 
adjust the contrast and brightness of a prescanned image and then 
send the adjusted image to the application software, without 
needing to scan the document again.
●Character/Line Emphasis Function
If characters and lines in scanned images are not clearly visible, you 
can use this function to adjust their thickness during scanning.
●Start Scanning from the Operating Panel
You can start scanning by launching...

20
Names and Functions of Parts
Front View (With the Eject Tray Closed)
AOPEN Lever
Pull this toward you to open the front unit.
BPower button
Press this to turn on the scanner. When pressed, the power 
indicator is lit.
Press this button again to turn off the power.
The power button lights or flashes as follows depending on the 
scanner status.
CDocument Eject Tray
Open this for scanning. Scanned documents are output here.
DEject Tray Support
Open this when scanning multiple documents of varying sizes...