Canon Imageformula Dr M160ii User Guide

21
Front View (With the Eject Tray Open)
GFeed Extension Support
Open this when placing long paper in the scanner.
HFeed Support
Pull this out to support loaded documents.
IOperating Panel
A range of scanning operations can be performed with this, such 
as starting and stopping scans, executing registered jobs, and 
cancelling double feed detection. (See p. 22)
JFront Unit
Open this when cleaning the inside of the scanner or replacing 
rollers.
KEject Support
Open this when loading long documents....

22
Back View
AUSB Connector
Connect the supplied USB cable to this connector.
BPower Connector
Connect the supplied AC adapter to this connector.
CTheft Prevention Hole (Security Slot)
Connect an anti-theft key chain or the like.
Operating Panel
AJob No. Indicator
Displays the number of the job selected with the operating panel.
BJob Select Button 
This selects registered jobs. Every time the button is pressed, the 
Job No. displayed in the Job No. Indicator changes.
CStart Button
This executes the job...

23
Basic Operation
Documents
The scanner can scan documents ranging in size from business cards 
to LTR/A4. The document sizes that this scanner can scan are shown 
below.
Plain Paper
Size
Width:  54 mm to 216 mm (2.12 to 8.5)
Length:  50.8 mm to 356 mm (2 to 14) (You can scan 
documents up to 3,000 mm (118.1) long by setting the 
scanner to the Long Document mode.)
Paper thickness
Normal feed:  27 to 209 g/m
2 (7 to 56 lb bond) 0.04 mm 
to 0.25 mm (0.00157 to 0.00984)
Non separation feed: 27 to 255 g/m...

24
 Scanning the following types of documents can cause a paper jam 
or malfunction. To scan such a document, make a photocopy of the 
document and then scan the photocopy.
Business Card
Size:  50.8 mm x 85 mm (2 x 3.35) or larger
Paper thickness:  380 g/m
2 (80 lb bond) 0.45 mm (0.177) or larger
Orientation:  Vertical feeding only
IMPORTANT
 We recommend placing business cards horizontally. Vertically 
placed business cards may not feed properly depending on their 
size.
 If a stack of business cards...

25
How to Place Documents
Scanning multiple documents
Standard paper feeding should be used when scanning multiple 
documents of a standard size at one time. Standard paper feeding 
enables multiple documents to be fed while separating each page.
1Open the document eject tray.
2Pull out the eject support.
When placing long documents, pull out the document eject 
extension support to match the length of those documents. Also, 
stand the eject stopper at the end of the eject support if necessary....

26
4Adjust the document guides to fit the width of the 
document to be scanned.
5Place the document.
After placing the document, align the document guides with both 
edges of the document.
IMPORTANT
 When placing documents into the feed tray, take care not to cut 
your hand on the edges of the paper.
 Make sure that the document does not exceed the loading limit 
marks ( ) on the document guides. Up to 60 pages of ordinary 
plain paper (80 g/m
2) can be loaded at the same time. Before you place a...

27
2Place the document as described in the “Scanning 
multiple documents” procedure on p. 25.
IMPORTANT
When scanning multiple page documents that are fastened 
together, such as invoices, place the documents so that the edge 
that is fastened together is facing down.
1Opens the scanner drivers Detail Settings screen.(See 
p. 57)
2Open the [Feeding] Tab.
3Select the [Non Separation Feeding Mode] check box.
4Click the [OK] button to close the settings screen.
1Opens the scanner drivers Detail Settings...

28
Placing Thin Paper (Thin Paper Mode)
When placing a document with thin paper, switch the mode of the 
scanner to thin paper mode. In thin paper mode, the placed document 
is fed in a manner that prevents it from being damaged.
Thin paper mode switching is performed by opening the scanner 
driver settings screen.
1Sets the scanning conditions.
2Place the document as described in the “Scanning 
multiple documents” procedure on p. 25.
Hint
 When scanning multiple page documents that are fastened...

29
3Select the [Thin Paper Mode] check box.
4Click   to close the dialog box.
Placing Cards
When scanning cards, switch the scanner to non separation mode and 
then place one card at a time horizontally.
1Switch the scanner to non separation mode.
2Adjust the document guides to fit the width of the card to 
be scanned.
3Place the card horizontally, with the reverse side facing 
you, and the top of the card facing down.
CAUTION
 Place the cards one at a time.
 When scanning cards, place them to be fed...

30
Placing Folded Documents
Folio Scan enables you to scan documents that are larger than LTR/
A4 and therefore do not fit in the feeder. To use the function, fold the 
document in half lengthwise and place it into the feeder. The DR-
M160II will scan both sides and combine the scanned images into a 
single image.
1Sets the scanning conditions.
2Fold the document in half.
Crease the document firmly down its center to fold the document 
in half. Fold the document so that its edges are neatly aligned. If...