Canon Gx 9 E Manual

							
Print Settings/Transfer Settings199
1Select [Print Settings].
1.Press the   button.
2. Press the   button.
3. Use the   or  button to select the 
 menu.
4. Use the   or   button to select 
[Print Settings].
5. Press the   button.
2Make settings.
1.Use the   or   button to select 
[Print Type], [Date], [File No.] or 
[Clear DPOF data].
2. Use the   or   button to specify the 
settings.
3. Press the   button.
zThe Date and File No. settings change according to the Print 
Type as follows.
- [Index]: 
[Date] and [File No.] cannot be set to [On] at the same time.
- [Standard] or [Both]: 
[Date] and [File No.] can be set to [On] at the same time, 
however, the printable information may vary between 
printers.
zDates print in the style specified in the [Date/Time] menu 
(p. 52).  
						

							
Print Settings/Transfer Settings200
Image Selection Methods
Select Images & Qty.  Configures print settings for single images as you view them.
Select Range You can select a range of sequential images and  make print settings for all the images in that range.
Select by Date Configures print settings for images corresponding  to the selected date.
Select by Category Configures print settings for images in the selected  category.
Select by Folder Configures print settings for images in the selected  folder.
Select All Images Configures print settings for all images.
Clear All Selections Removes all print settings from images.
Print settings are configured for  each image individually. With 
the [Select Images & Qty.] opti on, you can only set the number 
of copies to print when the [P rint Type] option is set to 
[Standard] or [Both] (p. 198).
1Select an image selection 
method.
1. Press the   button.
2. Press the   button.
3. Use the   or   button to select the 
 menu.
4. Use the   or   button to select an 
image selection method.
5. Press the   button.
• When selecting [Select All Images] go to Sub-step 4 in Step 2  (p. 202).  
						

							
Print Settings/Transfer Settings201
2Select an image and make print settings.
z[Select Images & Qty.]
Selection methods differ for the Print Type settings (p. 198).
Standard ( )/Both ( ) (p. 198)
1. Use the   or   button to select an 
image.
2. Press the   button.
3. Use the   or   button to select the 
number of print copies (up to 99).
4. Press the   button.
Index ( ) (p. 198)
1. Use the   or   button to select an 
image.
2. Press the   button to select or 
deselect it.
3. Press the   button.
• You can also select images in the  index playback mode.
• Pressing the  MENU button will end the setting.
z[Select Range]
Refer to Step 4 of “Selecting a Range of Images” in “Organizing 
Images by Category (My Category)” (p. 169), for details on how to 
select images.
After selecting images, proceed  with the following steps.
1. Use the   or   button to select [Order].
2. Press the   button.
3. Press the   button.
Number of Print Copies
Index Print Selection  
						

							
Print Settings/Transfer Settings202
z[Select by Date] [Select by 
Category] [Select by Folder]
1. Use the   or   button to select a 
date, category or folder.
2. Press the   button.
3. Press the   button.
• Pressing the  FUNC./SET button again cancels the setting.
• You can select multiple dates, categories or folders.
• Pressing the   or   button will allow you to check the  images by date, category or folder.
4. Use the   or   button to select 
[OK].
5. Press the   button.
• Selecting [Cancel] cancels print  settings of the selected image and 
returns you to Step 1.
zThe output of some printers or photo developing services 
may not reflect the specified print settings.
zPrint settings cannot be set for movies and  .
zImages are printed in order according to the file number.
zA maximum of 998 images can be selected.
zIf you are connected to a printer, the   button will light 
blue while you are selecting images. You can start printing at 
this point by pressing the   button, confirming that 
[Print] is selected and pressing the  FUNC./SET button.  
						

							
Print Settings/Transfer Settings203
You can use the camera to specify settings for images before downloading 
to a computer. Refer to the Software Starter Guide for instructions on how 
to transfer images to your computer. The settings used on the camera 
comply with the Digital Print Order Format (DPOF) standards.
Single Images
Setting the DPOF Transfer Settings
The   icon may display for a memory card with transfer 
settings set by a different DPOF-compliant camera. These 
settings will be overwritten by those set by your camera.
1Select [Transfer Order].
1. Press the   button.
2. Press the   button.
3. Use the   or   button to select   
in the   menu.
4. Press the   button.
2Select [Order].
1.Use the   or   button to select 
[Order].
2. Press the   button.
• Selecting [Reset] cancels all transfer  order settings.
3Select an image.
1. Use the   or   button to select an 
image to transfer.
2. Press the   button.
• Pressing the  FUNC./SET button 
again deselects the setting.
• You can also select images in the  index playback mode.
3. Press the   button several times to end the setting.
Transfer Selection  
						

							
Print Settings/Transfer Settings204
All the Images on a Memory Card 
1Select [Transfer Order].
1.Press the   button.
2. Use the   or   button to select   
in the   menu.
3. Press the   button.
2Select [Mark all].
1.Use the   or   button to select 
[Mark all].
2. Press the   button.
• Selecting [Reset] c ancels all transfer 
order settings.
3Select [OK].
1. Use the   or   button to select 
[OK].
2. Press the   button.
3. Press the   button.
zImages are transferred in order according to the file number.
zA maximum of 998 images can be selected.  
						

							
Connecting a TV set205
Connecting a TV set
You can shoot or play back images on a television with the supplied 
AV cable.
Viewing Images on a TV set
1Turn off the camera and the TV.
2Connect the AV cable to the 
camera’s A/V OUT terminal.
• Open the camera’s terminal cover and plug the AV cable in all the way.
3Plug the other ends of the 
AV cable to the VIDEO IN 
and AUDIO IN jacks on the 
TV.
4Turn on the TV and switch it to Video mode.
5Turn on the camera.
VIDEO
Yellow
BlackAUDIO  
						

							
Connecting a TV set206
zThe video output signal can be switched (NTSC or PAL) to 
accommodate different regional standards (pp. 47, 52). The 
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
- If the video system is set incorrectly, the camera output may not display properly.
zWhen the camera is set to shooting mode, you can take 
pictures while displaying  images on the television.  
						

							
Customizing the Camera (My Camera Settings)207
Customizing the Camera (My Camera Settings)
My Camera allows you to customize the start-up image and startup, 
operation, self-timer and shutter sounds. You can change and register 
these settings, enabling you to customize the camera to suit your own 
tastes.
Changing My Camera Settings
1Select the menu item.
1.Press the   button.
2. Use the   or   button to select the 
 menu.
3. Use the   or   button to select the 
menu item.
• Select [Theme] to set all to the same settings.
2Make settings.
1. Use the   or   button to select the 
contents you wish to set.
2. Press the   button.
When [Shutter Sound] is set to   or  , a shutter sound 
matching the shutter speed will play.  
						

							
Customizing the Camera (My Camera Settings)208
Images recorded onto the memory card and newly recorded sounds 
can be added as My Camera settings to the   menu items. You can 
also use the supplied software to upload your computer’s images and 
sounds to the camera.  
Registering My Camera Settings
A computer is required to restore  the My Camera settings to the 
defaults. Use the supplied software (ZoomBrowser EX/
ImageBrowser) to restore the default settings to the camera.
1Select the menu item.
1. Press the   button.
2. Press the   button.
3. Use the   or   button to select the 
 menu.
4. Use the   or   button to select the 
menu item you wish to register.
• Select [Theme] to register all to the same settings.
2Select .
1. Use the   or   button to select  .
2. Press the   button.
3Select an image or record a sound you wish to 
register.
zStart-up Image
1. Use the   or   button to select the 
image you wish to register.
2. Press the   button.