Canon Gx 9 E Manual

							
Advanced Shooting Functions159
File and Folder Numbers
Recorded images are assigned consecutive file numbers starting with 
0001 and ranging up to 9999, while folders are assigned numbers 
starting with 100 and ranging up to 999. 
Up to 2000 images can be saved into a single folder.
• Images may be saved to a new folder when there is insufficient free space even if the total number of images in a folder is less than 2000 because the following types of 
images are always saved together into the same folder.
• Images from continuous shooting    • Self-timer images (custom)  
• Stitch Assist mode images    • Focus Bracketing    • AEB shooting
• Color Accent/Color Swap still images (when [Save Original] is set to [On])
• Images cannot be played back when the folder numbers are duplicated or image  numbers are duplicated within folders.
• Please refer to the  Software Starter Guide  for information regarding folder structures 
or image types.
2Make settings.
1. Use the   or   button to select 
[Continuous] or [Auto Reset].
2. Press the   button.
New Folder Created Memory Card Exchanged 
for Another
Continuous Memory Card 1
Memory Card 1 Memory Card 2
Auto Reset Memory Card 1 Memory Card 1 Memory Card 2  
						

							
Playback/Erasing160
Playback/Erasing
In playback mode, you can select images with the control dial. Turning 
it counterclockwise selects the previous image while turning it 
clockwise selects the next image. Please also see Viewing Still Images 
(p. 19).
To Cancel the Magnified Display:  
Press the zoom lever toward  . (You  can also cancel it immediately 
by pressing the  MENU button.)
 
Viewing Magnified Images
1Press the zoom lever 
toward .
• A magnified portion of the image will 
display.
• Images can be magnified up to a  factor of approximately 10x.
2Use the  ,  ,   or   button to move around 
the image.
• If you use the control dial whil e in the magnified display mode, 
the camera will switch to the previous or next image at the same 
level of magnification.
• You can change the magnification level with the zoom lever.
Movie frames and index playback  images cannot be magnified.
Approximate location of 
the displayed area  
						

							
Playback/Erasing161
To Return to Single Image Playback: 
Press the zoom lever toward  .
Viewing Images in Sets of Nine 
(Index Playback)
1Press the zoom lever 
toward .
• Up to nine images can be viewed at 
once in index playback.
• Use the  ,  ,   or   button to  change the image selection.
Switching between Sets of Nine Images
The jump bar will display if you press the   button while in index 
playback and you can switch the display between sets of nine 
images.
• Pressing the zoom lever toward   also switches the display. Use the   or   
button to move to the previous or next 
set of 9 images.
• Hold the  FUNC./SET  button down and 
press the   or   button to jump to the 
first or last set.
To Cancel the Jump Bar: 
Press the   button.
Selected Image
Movie
Jump Bar  
						

							
Playback/Erasing162
Focus Check display allows you to check the focus of images taken. At 
this time, faces in the image are detected and frames matching the 
size of these facial images are displayed. Moreover, as you can 
change the display magnification and switch images, you can easily 
check facial expressions and whet her a subject’s eyes are closed.
Focus Check Display
Checking the Focus and Peoples’ 
Expressions (Focus Check Display)
1Press the   button.
2Press the   button 
repeatedly until the focus 
check display appears.
• Frames are displayed as follows.
• The orange frames allow you to change the display 
magnification, move the display position, and switch between 
display frames (p. 163).
Frame Color Summary
Orange Displays the range of the image displayed at bottom  right.
White The frame is displayed at a position at which the  image is in focus (AF Frame).
Gray Displays frames in positions where faces were  detected during playback (Face Frame).  
						

							
Playback/Erasing163
Changing the Display Magnification
Switching between the Frames
3Press the zoom lever 
toward .
• The bottom right of the screen is magnified.
3Press the   button.
• When multiple in-focus frames are 
displayed, or when multiple faces are 
detected, the position of the orange 
colored frame will change each time 
the  FUNC./SET  button is pressed. 
After you change the display 
magnification, the orange frame will adjust to the size of the face 
when you switch the position of the frame.  
						

							
Playback/Erasing164
Changing the Display Position
To Cancel Changing the Display Position: 
Press the  MENU button.
3Press the zoom lever 
toward .
• The bottom right of the screen is 
magnified.
4Use the , ,  or  
button to move the display 
position.
• When you press the  FUNC./SET 
button, the orange frame returns to its 
original position. When there are 
multiple frames displayed, the  FUNC./
SET  button switches between the different positions of the 
orange frames.  
						

							
Playback/Erasing165
When you have many images recorded onto a memory card, it is 
handy to use the search keys below to jump over images to find the 
object of your search. 
Jumping to Images
Shot Date Jumps to the first image of each shooting date.
My Category Displays the first image in each category.
Folder Displays the first image in each folder.
Movie Jumps to a movie.
By 10 images Jumps over 10 images at a time.
By 100 images Jumps over 100 images at a time.
1In single image playback mode, press the   
button.
• The camera will switch to jump search mode.
2Use the   or   button to 
select a search key.
• The screen sample will vary slightly  according to the search key.
• You can show/hide image  information using the  DISPLAY 
button.
Image Information  
						

							
Playback/Erasing166
3Display the Images.
z//: 
1. Press the   or   button.
• Press the  MENU button to return to 
single image playback.
z//: 
1. Use the   or   button to select a 
date, category, folder or movie for playback.
• When you turn the Control Wheel, you can view the defined 
images.
• Press the  MENU button to cancel the setting.
2. Press the   button.
• The camera will switch to defined playback mode and play 
back only images corresponding to the search key.
• Press the   button to c ancel defined playback mode.
zDefined playback mode will be canceled under the following 
conditions: 
- Changing categories (while using My Category to define 
images).
- When selecting a range of images.
- When saving an image as a new file after processing or  editing it.
- When erasing an image with [Erase] in the   menu.
Select the search key  
						

							
Playback/Erasing167
You can organize images into prepared categories (People, Scenery, 
Events, Category 1 – 3, To Do). Category information recorded with 
the [Auto Category] function (p. 49) can also be edited. At the category 
level, you can perform the following.
• Image searches (p. 165)    • Slide Show (p. 176)
• Protect (p. 192)    • Erase (p. 195)   • Configure print settings (p. 198)
Single Images
Organizing Images by Category (My Category)
1Select [My Category].
1. Press the   button.
2. Use the   or   button to select 
 in the   menu.
3. Press the   button.
• In playback mode, you can press the   button to display the screen in Step 3 directly.
2Select [Select].
1.Use the   or   button to select 
[Select].
2. Press the   button.  
						

							
Playback/Erasing168
Selecting a Range of Images
You can select a range of sequential images and gather them together 
in a category.  The file number of the last image should be larger than 
the number of the first image. Up to 500 images can be selected.
3Make settings.
1.Use the   or   button to select an 
image to classify.
2. Use the   or   button to select a 
category.
3. Press the   button.
4. Press the   button.
• You can put the same image into more than one category.
• You can set in index playback.
• You can cancel the classi fication by pressing the FUNC./SET 
button again.
1Select [My Category].
1. Press the   button.
2. Use the   or   button to select 
 in the   menu.
3. Press the   button.
2Select [Select Range].
1.Use the   or   button to select 
[Select Range].
2. Press the   button.