Canon Eos Rebel Sl1 100d Instruction Manual

311
Basically operates like a built-in flash for easy operation.
When an EX-series Speedlite (sold separately) is attached to the 
camera, almost all the autoflash control is done by the camera. In other 
words, it is like a high-output flash  attached externally in place of the 
built-in flash.
For detailed instructions, refe r to the EX-series Speedlite’s 
instruction manual.  This camera is a Type-A camera that can use all 
the features of EX-series Speedlites.
External Speedlites
EOS-dedicated,...

External Speedlites
312
 With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL 
autoflash mode, the flash can be  fired at full output only.
Set the camera’s shooting mode to < a> (manual exposure) or 
< f > (aperture-priority AE) and adjust the aperture setting before 
shooting.
  When using a Speedlite that has manual flash mode, shoot in the 
manual flash mode.
Sync Speed
The camera can synchronize with co mpact, non-Canon flash units at 
1/200 sec. or slower shutter speeds.
Use a sync speed...

313
With a commercially-available Eye-Fi card already set up, you can 
automatically transfer captured images to a computer or upload them to 
an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. For instructions on\
 
how to set up and use the Eye-Fi  card or to troubleshoot any image 
transfer problems, refer to the Eye-Fi card’s instruction manual or 
contact the card manufacturer.
The camera is not guaranteed to  support Eye-Fi card functions 
(including wireless...

H Using Eye-Fi Cards
314
5Check the [Access point SSID:].
 Check that an access point is 
displayed for [ Access point SSID: ].
  You can also check the Eye-Fi card’s 
MAC address and firmware version.
  Press the < M> button three times 
to exit the menu.
6Take the picture.
X The picture is transferred and the 
 icon switches from gray (not 
connected) to one of the icons below.
  For transferred images,  O is 
displayed in the shooting information 
display (p.270).
H(Gray)  Not connected : No...

315
H Using Eye-Fi Cards
Cautions for Using Eye-Fi Cards If “J ” is displayed, an error occu rred while retrieving the card 
information. Turn the camera’s  power switch off and on again.
  Even if [Eye-Fi trans. ] is set to [Disable], it may still transmit a signal. In 
hospitals, airports, and other places  where wireless transmissions are 
prohibited, remove the Eye-Fi card from the camera.
  If the image transfer  does not function, chec k the Eye-Fi card and 
computer settings. For details, refer...

316
o: Set automatically   k: User selectable    :  Not selectable/Disabled
*1 : 1 +73  or 1  cannot be selected.
*2 : Settable only for Live View shooting.
Function Availability Table According to Shooting Mode
Still Photo Shooting in Basic Zone Modes
FunctionA7C23458CPx6FGAll image quality settings 
selectablekkkkkkkkkkk k*1k*1
ISO speed
Automatically set/
ISO Autoooooooooooo o o
ManualMaximum for Auto
Picture 
StyleAutomatically set/AutoDDDDDDDDDDDDDManual selectionExtra Effect ShotkAmbience-based...

317
Function Availability Table According to Shooting Mode
*3: If the AF method is Quick mode during Live View  shooting, the external 
Speedlite will emit the AF-a ssist beam when necessary.
FunctionA7C23458CPx6FG
Focusing
One-Shot AFooooooooAI Servo AFooAI Focus AFoooAF point selectionoooooooooooooAF-assist beamoooo*3*3ooooo
Metering 
mode
Evaluative meteringooooooooooooCenter-weighted 
average meteringo
Metering mode 
selection
Exposure
Program shiftExposure compensationAEBAE lockDepth-of-field...

Function Availability Table According to Shooting Mode
318
o: Set automatically   k: User selectable    :  Not selectable/Disabled
*1 : Settable only for Live View shooting.
Still Photo Shooting in Creative Zone Modes
FunctiondsfaAll image quality  settings selectablekkk k
ISO speedAutomatically set/ISO Autokkk kManualkkk kMaximum for Autokkk k
Picture StyleAutomatically set/Autokkk kManual selectionkkk kExtra Effect ShotAmbience-based shotsLighting/scene based shotsBackground blurColor toneCreative...

319
Function Availability Table According to Shooting Mode
*2 : With ISO Auto, you can set a fixed ISO speed.
*3 : Settable only for  viewfinder shooting.
Functiondsfa
Metering modeEvaluative meteringkkkkMetering mode 
selectionkkkk
Exposure
Program shiftkExposure 
compensationkkk
AEBkkkk
AE lockkkk*2
Depth-of-field 
previewkkkk
Drive/
self-timer
Single shootingkkkk
Continuous shootingkkkkSilent single shooting*3kkkkSilent continuous 
shooting*3kkkk
Q (10 sec.)kkkkl (2 sec.)kkkkq (Continuous)kkkk...

Function Availability Table According to Shooting Mode
320
o: Set automatically   k: User selectable    :  Not selectable/Disabled
*1: The  z icon indicates still photo sh ooting during movie shooting.
Movie Shooting
Function
MoviesStill Photos
A7C23458dsfaz*1
ykMykMAll image quality settings 
selectable (movie)kkkkkkk k kkkk
All image quality settings 
selectable (still photos)kkk
Video snapshotkkkkkkk kkkkk
ISO 
speedAutomatically set/
ISO Autoooooooo o oook o o k
Manualkk
Picture 
StyleAutomatically...