Canon Eos Rebel Sl1 100d Instruction Manual

301
3 Custom Function Settings N
C.Fn II: Image
C.Fn-3 Highlight tone priority
0: Disable
1: Enable
Improves the highlight detail. The dynamic range is expanded from 
the standard 18% gray to bright  highlights. The gradation between 
the grays and highlights becomes smoother.
  With setting 1, the Auto Lighting Opti mizer (p.130) is automatically set to 
[ Disable ] and the setting cannot be changed.
  With setting 1, noise (g rainy image, banding, etc.) may become slightly 
more pronounced th an with...

3 Custom Function Settings N
302
C.Fn III: Autofocus/Drive
C.Fn-4 AF-assist beam firing
Enables or disables the built-in fl ash’s AF-assist beam or the EOS-
dedicated external Speedlite’s AF-assist beam.
0: Enable The AF-assist beam will be emitted when necessary.
1: Disable The AF-assist beam is not emitted. This prevents the AF-assist 
beam from disturbing others.
2: Enable external flash only If an external Speedlite is attached,  it will emit the AF-assist beam 
when necessary. The camera’s built-in...

303
3 Custom Function Settings N
C.Fn IV: Operation/Others
C.Fn-6 Shutter/AE lock button
0: AF/AE lock
1: AE lock/AF
This is convenient when you want to focus and meter separately. 
Press the < A> button to autofocus, and press the shutter button 
halfway to apply AE lock.
2: AF/AF lock, no AE lock In the AI Servo AF operat ion, you can press the  button to 
pause the AF operation momentarily. This prevents the AF from 
being thrown off by any obstacle  passing between the camera and 
subject. The...

3 Custom Function Settings N
304
C.Fn-7 Assign SET button
You can assign a frequently-used function to . When the 
camera is ready to shoot, pressing the  button will display 
the respective function setting screen.
0: Quick Control screen The Quick Control screen will appear.
1: Image quality The Image quality setting screen will  appear. Select the desired 
image-recording quality, then press <
Q/0 >.
2: Flash exposure compensation The Flash exposure compensati on setting screen will appear. Set 
the...

305
Under the My Menu tab, you can register up to six menu options and 
Custom Functions whose settings you change frequently.
1Select [My Menu settings].
 Under the [ 9] tab, select [ My Menu 
settings ], then press < 0>.
2Select [Register to My Menu].
 Select [Register to My Menu ], then 
press < 0>.
3Register the desired items.
 Select the item, then press < 0>.
 On the confirmation dialog, select [OK] 
and press  to register the item.
  You can register up to six items.
  To return to the screen in...

COPY  

307
Reference
This chapter provides reference information for camera 
features, system accessories, etc.
Certification Logo
Under the [ 54] tab, if you select [ Certification Logo Display ] 
and press < 0>, some of the logos of th e camera’s certifications 
will appear. Other certificatio n logos can be found in this 
Instruction Manual, on the came ra body, and on the camera’s 
package.
COPY  

308
With AC Adapter Kit ACK-E15 (sold separately), you can connect the 
camera to a household power outlet and not worry about the remaining 
battery level.
1Connect the power cord.
 Connect the power cord as shown in 
the illustration.
  After using the camera, unplug the 
power plug from the power outlet.
2Connect the DC Coupler.
 Connect the DC cord’s plug to the DC 
Coupler.
3Insert the DC Coupler.
 Open the cover and insert the DC 
Coupler until it locks in place.
4Push in the DC cord.
 Open the DC...

309
This remote controller enables you to take pictures wirelessly up to 
approx. 5 meters/16.4 feet from th e camera. You can either shoot 
immediately or use a 2-sec. delay.
  Set the self-timer to < Q> (p.110).
  Point the remote controller toward the camera’s remote control 
sensor and press the transmit button.
X The camera will autofocus.
X When focus is achieved, the self -timer lamp will light up and the 
picture will be taken.
Remote Control Shooting
Remote Controller RC-6 (Sold Separately)...

Remote Control Shooting
310
Remote Switch RS-60E3 (sold separately) comes with an approx. 60 
cm/2.0 ft cord. When connected to the camera’s remote control 
terminal, it can be pressed halfway and completely, just like the shutter 
button.
When you use the self-timer, bulb, or Remote Switch and do not look 
through the viewfinder, stray light entering the viewfinder can cause the 
image to look dark. To prevent th is, use the eyepiece cover (p.29) 
attached to the camera strap.
During Live View shooting...