Canon Eos Rebel Sl1 100d Instruction Manual

271
B Shooting Information Display
* With images taken in a Basic Zone mode, the information displayed will differ 
depending on the shooting mode.
* If manual exposure was used, the sh utter speed, aperture, and ISO speed 
(when set manually) will be displayed.
* The < > icon will be di splayed for video snapshots.
Sample Still Photo Taken in a Basic Zone Mode
Sample Movie
Ambience and ambience 
effects
Lighting or scene
Shooting mode
Shooting mode
Movie file size
Shutter speed
Frame rate
Movie...

B Shooting Information Display
272
 Highlight AlertWhen the shooting information is disp layed, any overexposed areas of the 
image will blink. To obta in more image detail in the overexposed areas, set 
the exposure compensation to a  negative amount and shoot again.
 HistogramThe brightness histogram shows the expo sure level distribution and overall 
brightness. The RGB histogr am is for checking the color saturation and 
gradation. The display  can be switched with [
x2: Histogram disp].
[Brightness]...

273
Post-ProcessingImages
After taking a picture, you c an apply a Creative filter, 
resize the image (reduce the  number of pixels), or crop 
the image.
  The camera may not be  able to process images taken with 
another camera.
  Post-processing images as described in this chapter is not 
possible while the camera is co nnected to a computer via the 
 terminal.
COPY  

274
You can apply the following Creative filters to an image and save it as a 
new image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, 
Water painting effect, Toy camera effect, and Miniature effect.
1Select [Creative filters].
  Under the [x 1] tab, select [ Creative 
filters ], then press < 0>.
X An image will be displayed.
2Select an image.
  Select the image you want to apply a 
filter to.
  By pressing the < Hy> button, you 
can switch to the  index display and 
select an image.
3Select...

275
U Applying Creative Filters
5Save the image.
  Select [OK ] to save the image.
  Check the destination folder and 
image file number, then select [ OK].
  To apply filters to another image, 
repeat steps 2 to 5.
  To return to the menu, press the 
 button.
  Grainy B/W
Creates a grainy black-and-white  photo. You can change the black-
and-white effect by adjusting the contrast.
  Soft focus
Gives the image a soft look. You  can change the degree of softness 
by adjusting the blur.
  Fish-eye effect...

U Applying Creative Filters
276
  Art bold effect
Makes the photo look like an oil pa inting and the subject look three-
dimensional. You can adjust the cont rast and saturation. Note that 
the sky, white walls, and similar subjects may not be rendered with a 
smooth gradation and may look irr egular or have significant noise.
  Water painting effect
Makes the photo look like a watercolor  painting with soft colors. You 
can adjust the color density. Note  that night scenes or dark scenes 
may not be...

277
You can resize an image to make the pixel count lower and save it as a 
new image. Resizing an image is  possible only with JPEG 3/4 /a /b  
images. JPEG  c and RAW images cannot be resized.
1Select [Resize].
  Under the [ x1] tab, select [ Resize], 
then press < 0>.
X An image will be displayed.
2Select an image.
  Select the image you want to resize.
  By pressing the < Hy> button, you 
can switch to the index display and 
select an image.
3Select the desired image size.
  Press < 0> to display the...

S Resizing JPEG Images
278
Resize Options According to Original Image Size
The image size displayed in step 3 on the preceding page, such as 
[***M ****x**** ], has a 3:2 aspect ratio. The image size according to 
aspect ratios is shown in the table below.
The asterisked image-recording qualit y figures do not exactly match the 
aspect ratio. The image  will be cropped slightly.
Original Image 
SizeAvailable Resize Settings
4 abc
3 kkkk
4
kkk
a
kk
b
k
c
Image Sizes
Image 
QualityAspect Ratio and Pi xel...

279
You can crop the image as desired and save it as a new image. JPEG 
c  and  RAW images cannot be cropped.  The 1+73  image’s 
JPEG image can be cropped.
1Select [Cropping].
 Under the [ x2] tab, select 
[Cropping], then press < 0>.
X An image will be displayed.
2Select an image.
  Select the image you want to crop.
  By pressing the < Hy> button, you 
can switch to the index display and 
select an image.
3Set the cropping frame’s size, 
aspect ratio, position, and 
orientation.
  Press < 0> to...

N Cropping JPEG Images
280
Moving the Cropping Frame  Press the < S> cross keys.
X The cropping frame will move  up, down, left, or right.
  You can also touch the cropping frame and drag it to the desired 
position.
Rotating the Cropping Frame Orientation Press the < B> button.
X The cropping frame will switch betw een the vertical and horizontal 
orientations. This enables you to create a vertical image from a 
horizontal one, and vice versa.
4Display the cropped image in the 
full view.
  Press the <...