Canon Eos 30 D Manual

121
Image Playback
You can rotate an image by 90° or 270° clockwise. Images will then be 
displayed in the correct orientation during playback.
1Select [Rotate].
 Turn the < 5> dial to select [ x 
Rotate ], then press < 0>.
X The Rotate screen will appear.
2Rotate the image.
  Turn the < 5> dial to select the 
image to be rotated, then press 
< 0 >.
X Each time you press < 0>, the image 
will rotate clockwise.
  To rotate another image, repeat step 
2.
  To stop rotating the image, press the 
 button....

122
By connecting the camera to a TV set with the video cable (provided), 
you can view the captured images on a TV set. Always turn off the 
camera and the television before  connecting or disconnecting them.
1Connect the camera to the TV.
 Open the camera’s terminal cover.
  Use the video cable (provided) to 
connect the camera’s < q> terminal 
to the TV monitor’s VIDEO IN 
terminal.
  Insert the cable plug all the way in.
2Turn on the TV and switch the 
TV’s line input to Video IN.
3Set the < 4>...

123
This prevents the image from being erased accidentally.
1Select [Protect].
 Turn the < 5> dial to select [ x 
Protect ], then press < 0>.
X The protect setting screen will 
appear.
2Protect the image.
  Turn the < 5> dial to select the 
image to be protected, then press 
< 0 >.
X When an image is protected, the 
 icon will appear below the 
image.
  To cancel the image protection, press 
 again. The < K> icon will 
disappear.
  To protect another image, repeat step 
2.
  To exit the image...

124
You can erase images individually or erase all the images at one time in 
the CF card. Only protected images (p.123) will not be erased.
Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them.
1Display the image.
 Press the < x> button.
2Select the image to be erased.
 Turn the < 5> dial to select the 
image to be erased.
3Display the erase menu.
  Press the < L> button.
X...

125
L Erasing Images
1Display the image.
  Press the < x> button.
2Display the erase menu.
 Press the < L> button.
X The erase menu will appear at the 
bottom of the screen.
3Select [All].
  Turn the < 5> dial to select [ All], 
then press < 0>.
X The confirmation dialog will appear.
4Erase the images.
  Turn the < 5> dial to select [ OK], 
then press < 0>.
X All unprotected images will be 
erased.
  While the images are being erased, 
you can cancel the erasure by 
pressing < 0>.
Erasing All Images...

126
Format the CF card before using it in the camera.Formatting a CF card will erase  everything in the card. Even 
protected images will be erased, so make sure there is 
nothing you need to keep. If necessary, transfer images to a 
personal computer before formatting the card.
1Select [Format].
  Turn the < 5> dial to select [ c 
Format ], then press < 0>.
X The confirmation dialog will appear.
2Format the CF card.
  Turn the < 5> dial to select [ OK], 
then press < 0>.
X The CF card will be formatted...

127
8
Direct Printing
from the Camera
You can connect the camera directly to a printer and 
print out the images in the CF card. 
The camera enables direct printing with printers 
compatible with “< w> PictBridge”, Canon “< A> CP 
Direct”, and Canon “< S> Bubble Jet Direct.”  

128
This chapter includes procedures for various types of printers. After 
“Preparing to Print” on the next page,  follow the instructions applicable 
to your printer on the pages indicated.
The Web site below gives more information about using your Canon 
camera with various printers such as which paper types to use.
http://canon.com/pictbridge/
Conventions Used in this Chapter
Canon’s PictBridge Web Site
wA
Compatible with 
Bubble Jet Direct onlyCompatible
with PictBridge Compatible
with PictBridge...

129
You do the direct printing procedure entirely through your camera’s LCD monitor.
1Select [Communication].
 Turn the < 5> dial to select [ c 
Communication ], then press .
2Select [Print/PC].
  Turn the < 5> dial to select [ Print/
PC ], then press < 0>.
1Turn the camera’s < 4> switch to 
< 2 >.
2Set up the printer.
 For details, refer to the printer’s 
manual.
3Connect the camera to the 
printer.
 See the “Printers and Cables” table 
on the next page, and use the proper 
cable.
Preparing to Print...

Preparing to Print
130
 If the printer has a built-in USB cable, 
connect the camera to that cable.
  When connecting the cable plug to 
the camera’s < p> terminal, the 
cable plug’s < D> icon must face the 
front side of the camera. 
  To connect to the printer, refer to the 
printer’s instruction manual.
4Turn on the printer.
5Turn the camera’s < 4> switch to 
< 1 > or < J>.
XSome printers may have a beeping 
sound.
Printers and Cables
Printer CompatibilitySuitable Cable
PictBridge 
only
Interface...