Canon Eos 30 D Manual

111
Vertical shots can be rotated automatically so that they are displayed upright during playback.
1Select [Auto rotate].
 Turn the < 5> dial to select [ c Auto 
rotate ], then press < 0>.
2Select [On zD ].
  Turn the < 5> dial to select [ On 
z D ], then press < 0>.
3Take a vertical shot.
 For the image review right after image 
capture, the image will not be displayed 
vertically on the LCD monitor.
4Playback the image.
  Press the < x> button.
X The vertical shot will be displayed 
vertically as...

112
You can adjust the brightness of the LCD monitor to one of five levels.
1Select [LCD brightness].
 Turn the < 5> dial to select [ c LCD 
brightness ], then press < 0>.
X The brightness adjustment screen will 
appear.
2Adjust the brightness.
  While looking at the gray chart on the 
left, turn the < 5> dial to adjust.
  Press < 0> to exit the setting and 
return to the menu.
3 Setting the LCD Brightness
To check the image’s exposure, look at the histogram (p.115).  

113
You can select any captured image to view. You can view a single image, the shooting information, an in dex display, or a magnified view.
1Playback the image.
 Press the < x> button.
X The last captured image will appear 
on the LCD monitor.
2Select the image.
  To playback images  starting with the 
last image, turn the dial 
counterclockwise. To playback 
images starting with the first captured 
image, turn the < 5> dial clockwise.
  Press the < B> button to switch 
the display format.
  To quit...

Image Playback
114
  Highlight Alert
When the shooting information is di splayed, any overexposed areas 
of the image will blink. To obtain more image detail in the 
overexposed areas, set the exposure compensation to a negative 
amount and shoot again.
   
AF Point Display
On the menu, if [ x AF points ] is set to [Display] (p.35), the AF 
point will also be displayed on the shooting information screen.
If the image was taken in the One-Shot AF mode, the AF point which 
achieved focus will be...

115
Image Playback
  Histogram
On the menu’s [ x Histogram ] setting, you can select [ Brightness] 
or [ RGB ]. (p.35)
[Brightness] Display
This histogram is a graph s howing the distribution of 
the image’s brightness level. The horizontal axis 
indicates the brightness level (darker on the left and 
brighter on the right), while the vertical axis 
indicates how many pixels  exist for each brightness 
level. 
The more pixels there are toward the left, the darker 
the image. And the more pixels there...

Image Playback
116
Nine thumbnail images are displayed on one screen.
1Set the camera for playback.
 Press the < x> button.
X The last captured image will appear 
on the LCD monitor.
2Display the index images.
  Press the < I> button.
X The selected thumbnail will be 
highlighted with a green frame.
3Select the image.
  Turn the < 5> dial to move the green 
frame.
Switching from the index display to another display format
  To display a single image, press the < x> button.
  Pressing the < u> button...

117
Image Playback
You can magnify the image by 1.5x to 10x on the LCD monitor.
1Display the image.
 Display the image in the single-image 
or image info. display format.
2Magnify the image.
 Press the < u> button.
X First, the center of the image will be 
magnified.
  To increase the magnification, hold 
down the < u> button.
  Press the < I> button to reduce 
the magnification. Hold down the 
button to continue reducing the 
magnification until it reaches the size 
in step 1.
3Scroll around the...

Image Playback
118
During the single image, image with shooting information, index, or 
magnified view display, you can jump forward or back to images stored 
on the CF card.
1Playback the image.
  Display a single image, image with 
shooting information, index, or 
magnified view.
2Go to the jump display.
 Press the < C> button.
X The jump bar will appear at the 
bottom of the screen.
3Jump forward or back.
  Turn the < 5> dial.
 
  To quit the image jump, press the 
 button. The jump bar will...

119
Image Playback
  Jumping during the single image or image with shooting 
information display
During the single image and informat ion display, you can use the 
Jump feature (by 10 or 100 images, by date).
 At step 2 on page 118, press the 
 button, then press < 0>.
  Turn the < 5> dial to select the jump 
method, then press < 0>.
  Turn the < 5> dial to jump according 
to the selected jump method.
 Jump 10 images /   Jump 100 images
Turn the < 5> dial clockwise to jump forward by 10 or 100 images....

Image Playback
120
You can playback the CF card’s images in an automatic slide show. 
Each image will be displayed for about 3 sec.
1Select [Auto play].
 Turn the < 5> dial to select [ x 
Auto play ], then press < 0>.
X The auto play screen will appear.
2Start the auto play.
XAfter [ Loading image... ] is displayed 
for a few seconds, auto play will start.
  To pause the auto play, press < 0>.
  During pause, [ ]  will be displayed 
on the upper left of the image. Press 
< 0 > again to resume the auto...