Canon Eos 30 D Manual

131
Preparing to Print
6Playback the image.
 Press the < x> button.
X The image and the printer icon < w>, 
< A >, or < S> indicating a printer 
connection will be displayed.
X The < l> button lamp will light in 
blue.
  The procedure will be different 
depending on the icon displayed. See 
the applicable pages below.
SBubble Jet Direct
ACP Direct
wPictBridge
IconReference pages
132 - 138, 147
139 - 141, 147
142 - 144, 147
w
A
S
  RAW images are not compatible with direct printing.
  If you use a...

132
The setting options will differ depending on the printer. Some 
settings might be disabled. For details, refer to your printer’s instruction 
manual.
1Select the image to be printed.
  Check that the < w> icon is 
displayed on the upper left of the LCD 
monitor.
  Turn the < 5> dial to select the 
image to be printed.
2Press < 0>.
XThe print setting screen will appear.
3Select [Paper settings].
  Turn the < 5> dial to select [ Paper 
settings ], then press < 0>.
X The Paper settings screen will...

133
wPrinting with PictBridge
 Turn the < 5> dial to select the size 
of the paper loaded in the printer, 
then press < 0>.
X The Paper Type screen will appear.
  Turn the < 5> dial to select the type 
of paper loaded in the printer, then 
press < 0>.
X The Layout screen will appear.
About the Paper Types
If you are using a Canon PIXMA/DS/BJ printer with Canon paper, set 
the respective paper type as follows:
If you are using a non-Canon printer, refer to the printer’s instruction 
manual.
 Turn the <...

wPrinting with PictBridge
134
About Page Layout
*   From the Exif data, the camera name, lens name, shooting mode, shutter speed, aperture, 
exposure compensation amount, ISO speed, white balance, etc., will be imprinted.
** This depends on the < I> date/file number imprinting option set in step 5.
 4Set the printing effects.
 Set as desired. If you need not set any 
printing effects, go to step 5 on page 137.
 Turn the  dial to select the item on the 
upper right (see left figure), then press <
0>....

135
wPrinting with PictBridge
 With step 4, select the item. When 
 is displayed, press the 
< C > button. You can then set the 
parameters for fine adjustments.
The parameters that can be adjusted 
for the selected item are shown in the 
table below.
  Turn the < 5> dial to select the item 
to be adjusted, then press < 0>.
Printing Adjustments  
(k : Adjustable)
  Turn the < 5> dial to make the 
adjustment, then press < 0>.
 Adjustment of Printing Effects
Item Off / On / Vivid / 
Natural Natural MB/W /...

wPrinting with PictBridge
136
 Turn the < 5> dial to select the item 
to be adjusted, then press < 0>.
  Select [ Manual ] and press < 0>. The 
Adjust levels screen will then appear.
  Turn the < 5> dial to adjust the 
shadows (black) within 0 to 127.
  Press the < C> button.
  Turn the < 5> dial to adjust the 
highlights (white) within 128 to 255.
  Press < 0> to exit. The previous 
screen will reappear.
  Turn the < 5> dial, select either [ Off] 
or [ On], then press < 0>.
  Select [ Detail set. ],...

137
wPrinting with PictBridge
 Press the < 9> up, down, left or right 
to move the dot “   ” on the screen to 
the desired position.
 
B is for blue, A is amber, M is magenta, 
and G is green. The color balance will 
shift in the respective direction.
  On the upper left, “ SHIFT” indicates 
the color balance direction and 
correction amount.
  Press < 0> to exit. The previous 
screen will reappear.
  After completing the detail settings of 
printing effects, press the < M> 
button, then go to step 5....

wPrinting with PictBridge
138
7Start printing.
 Turn the < 5> dial to select [ Print], 
then press < 0>.
X The printing will start.
X During the printing, the < l> button 
lamp will blink in blue.
  When the printing ends, the screen 
will return to step 1.
  To stop the printing, press < 0> while 
[ Stop ] is displayed, then turn the 
< 5 > dial to select [ OK] and press 
< 0 >.
  Depending on the image’s file size and recording quality, it may take 
some time for the printing to start after you select...

139
1Select the image to be printed.
 Check that the < A> icon is displayed 
on the upper left of the LCD monitor.
  Turn the < 5> dial to select the 
image to be printed.
2Press .
X The print setting screen will appear.
3Select [Style].
  Turn the < 5> dial to select [ Style], 
then press < 0>.
X The Style screen will appear.
A Printing with CP Direct
Printer connected icon
Print setting screen
Sets the quantity to be printed.
Sets the trimming area.
Sets the printing style.
Returns to step 1. 
Starts...

A Printing with CP Direct
140
4Set the options as desired.
  Set the [ Image], [Borders ], and 
[ Date ] as desired.
  Turn the < 5> dial to select the menu 
item, then press < 0>.
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
  [Image ] is selectable when card-size 
paper is used. If you select [ Multiple], 
8 small images of the same picture 
will be printed on the paper.
  Check the [ Borders] and [Date] 
settings and set them if necessary.
  When you are done, press the...