Canon Eos 30 D Manual

171
3 Custom Function Settings N
C.Fn-09 Bracket sequence / Auto cancel
You can change the AEB sequence w hen the pictures are bracketed 
with the shutter speed or aperture and the file-saving sequence for 
white balance bracketing (WB-BKT). When “Auto cancellation” is set, 
bracketing will be cancel ed in the following cases:
AEB: You turn the < 4> switch to < 2>, change lenses, have flash-
ready, replace the battery, or replace the CF card.
WB-BKT: You turn the < 4> switch to < 2>, replace the...

3 Custom Function Settings N
172
C.Fn-11 Menu button display position
When you press the  button, you can set the menu screen 
setting.
0: Previous (top if power off)
Displays the preceding menu screen that was used. Note that the 
top menu screen [ Quality] will be displayed instead when the 
< 4 > switch is turned < 2>.
1: Previous
Displays the preceding menu screen that was used.
2: Top
Always displays the top menu screen [ Quality].
C.Fn-12 Mirror lockup
0: Disable
1: Enable
Effective for close-up...

173
3 Custom Function Settings N
C.Fn-14 E-TTL II 
0: Evaluative
Fully automatic flash photography fo r all conditions, from low light 
to daylight fill-flash.
1: Average
The flash is averaged for the entire area covered by the flash. Since automatic 
flash exposure compensation will not be  executed, you may have to set it 
yourself depending on the scene. This also applies if you use FE lock.
C.Fn-15 Shutter curtain sync.
0: 1st-curtain sync.
1: 2nd-curtain sync.
When a slow shutter speed is set, you...

3 Custom Function Settings N
174
C.Fn-18 Lens AF stop button function
0: AF stop
1: AF start
AF operates only while the AF stop button is pressed. While the 
button is pressed, AF operation with the camera is disabled.
2: AE lock
When the button is pressed, AE lo ck is applied. Convenient when 
you want to focus and meter separately.
3: AF point: M  9 Auto / Auto  9 ctr
In the manual AF point selection mode, the button instantly 
switches to automatic AF point  selection from manual AF point 
selection...

175
12
Reference
This section will help you understand your camera 
better. It covers information on camera features, system 
accessories, and other reference information.  

176
o: Set automatically  k: User selectable
Function Availability Table
k
o
o
o
o
o
o
o k
o
o
o
o
o
o
o k
o
o
o
o
o
o
o k
o
o
o
o
o
o
o
k
o
o
o
o
o
o k
o
o
o
o
o
o k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
kk
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
kk
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
kk
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
o –
–
o –
k
k
o
o
o
o
o
o
 JPEG
 RAW
  RAW + JPEG
 Auto
 Manual
 Standard
 Portrait
 Landscape
 Neutral...

177
Function Availability Table
o: Set automatically  k: User selectable
o
o
k o
k o
o
k o
k o
o
k o
k o
o
k o
k
o
o
k o o
o
k o k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
kk
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
kk
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
kk
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
o
o
k
o
 Evaluative
 Partial
 Spot
 Center-weighted average
 Program shift
 Exposure compensation
 AEB
 AE lock
 
Depth-of-field preview
 Single
 
High-speed continuous
 Low-speed continuous...

Function Availability Table
178
*When the lens’ focus mode switch is set to , AE lock is applied at the center AF point.
AF Modes and Drive Modes
Drive modeAF mode
One-Shot AFAI Focus AFAI Servo AF
uSingle 
shooting
An image cannot be taken 
unless focus is achieved. 
When focus is achieved, it 
is locked. With evaluative 
metering, the exposure 
setting is also locked. 
(The exposure setting is 
stored in memory before 
the shot is taken.)Automatically 
switches 
between One- 
Shot AF and AI 
Servo AF...

179
The following program line applies when the camera is in Program AE 
 mode.
Program Line Description
The lower horizontal axis represents the shutter speed, and the right-
hand vertical axis represents the aper ture. The combinations of shutter 
speed and aperture automatically determined by Program AE are 
shown as lines with respect to the  subject brightness (Exposure Value) 
gradations on the left and top edges of the graph.
Example: Using an EF-S17-85mm f/4-5. 6 IS USM lens with a subject...

180
If there is a problem, first refer to this Troubleshooting Guide. If this 
Troubleshooting Guide does not resolve the problem, contact your 
dealer or nearest Canon Service Center.
  You are using the wrong battery.
X Do not recharge any battery pack other than Battery Pack BP-
511A, BP-514, BP-511, or BP-512.
  The battery is not properly attached to the battery charger.
X Attach the battery properly to the charger. (p.22)
  The battery is exhausted.
X Recharge the battery. (p.22)
  The battery is...