Canon Eos 3 Owners Manual

Major Specifications
141
■ Exposure Control
Metering modes: TTL max. aperture metering with a 21-zone silicon photocell.
(1) Evaluative metering (linkable to any focusing point)
(2) Partial metering (approx. 8.5% of viewfinder at center)
(3)Center spot metering (approx. 2.4% of viewfinder at
center)
(4) Spot metering (linked to focusing point at approx. 2.4% of viewfinder)
* During continuous shooting with metering modes (3) and
(4), the first shot is metered in real time and the meter
reading is locked...

Major Specifications
142
Multiple exposures:Max. 9 multiple exposures. Cancels automatically after all
multiple exposures are taken. (Cancelable and resettable at
any time.)
■ AF
Type: TTL-AREA-SIR with a CMOS sensor
Focusing points: Area AF with 45  focusing points (Custom Function can limit
this to 11)
AF working range: EV 0-18 (at ISO 100)
Focusing modes: (1) One-Shot AF: Autofocus stops when focus is achieved.
AF lock enabled. Shutter releases only when focus is
achieved.
(2) Predictive AF with AI...

Major Specifications
143
■ Film Transport
Film loading: Automatic loading with a sprocketless system. After film is
loaded and the back is closed, the film advances to frame 1
automatically, taking about 1 sec.
Film advance system: Automatic film advance with built-in motor. (1) EOS 3: Single  and continuous  shooting.
(2)With Power Drive Booster PB-E2: Single  , low
continuous  , and high continuous  .
Shooting capacity: No. of 24-ex. rolls / No. of 36-ex. rolls At 20°C: Approx. 75 /Approx. 50 At –20°C:...

Major Specifications
144
counter, (9) AEB sequence, (10) Focusing point
superimposed flashing, (11) Focusing point selection method,
(12) Mirror lockup, (13) Spot metering linkage to focusing
point, (14) Fill-in flash output control, (15) Shutter-curtain flash\
synchronization, (16) Safety shift for shutter speed priority-AE
and aperture-priority AE, (17) Manual focusing point selection
range.
LCD panel: Displays shooting, metering, AF, and film advance modes;
shutter speed, aperture, frame counter, and...

Custom Sticker
Function  No. 0123
CF-0
CF-1
CF-2
CF-3
CF-4
CF-5
CF-6
CF-7
CF-8 Custom Sticker
Function  No. 0123
CF-9
CF-10
CF-11
CF-12
CF-13
CF-14
CF-15
CF-16
CF-17
Custom Function Symbols
145
•A  sticker is provided for the Custom Functions.  Affix it to the side doo\
r on the inside.
• For details on CustomFunctions, see pages 106 to 121 .
 09. C836-E (127~)  28-01-2003  13:03  Pagina 145 

146This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause\
harmful interference, and (2) this device must accept any interference\
received, including interference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless
otherwise specified in the instructions. If such changes or
modifications should be made, you could be required to stop
operation of the equipment.
This...