Canon Eos 3 Owners Manual

3. Using Non-Canon Flash Units
Sync Speed
The EOS-3 can synchronize with compact, non-Canon flash units at
1/200 sec. or slower shutter speeds. With large studio flash, the sync
speed is 1/125 sec. or slower. Be sure to test the flash to see if it
synchronizes properly with the camera.
PC Terminal
The camera’s PC terminal is provided for flash units using a sync cor\
d.
The PC terminal is threaded to prevent inadvertent disconnection. Only X\
-
sync is used for synchronization at 1/200 sec. or...

102
Taken with an f/22 aperture. Taken with an f/2 aperture.
●Depth of Field
This is the range in front of and behind the plane of optimum focus
where acceptable focus can be achieved. The smaller the aperture (the
larger the F-number), the greater the depth of field will be. And the
larger the aperture (the smaller the F-number), the shallower the dept\
h
of field will be.
The depth of field is affected as described below:
(1) A smaller aperture (a larger F-number) increases the depth of field.
(2) A...

Custom Functions
You can customize camera functions with the camera’s Custom
Functions.
In the previous text, the CF symbol was used to point out a relevant
Custom Function. In this chapter, all the Custom Functions are described\
in detail.
First set the < > switch to < >. If
necessary, also set the < > switch to
.
103
 08. C836-E (103~)  28-01-2003  12:53  Pagina 103 

1. Setting and Canceling Custom Functions
Setting a Custom Function
Open the side door and press the
 button.
•The Custom Function No. appears on the
LCD panel.
Turn the < > dial until the
desired Custom Function No.
appears.
Then press the < > button to
change the Custom Function’s
setting. Each time you press the
  button, the Custom Function
setting changes.
• To change Custom Function  ’s
setting, press the < > button for at least
2 seconds. See page 133.
Press the shutter button halfway.
The LCD...

Setting and Canceling Custom Functions
Canceling a Custom
Function
Select the Custom Function No.
whose setting is to be canceled,
then press the < > button until
the setting returns to  on the LCD
panel.
Press the shutter button halfway.
The LCD panel returns to the
normal display.
Canceling All Custom
Functions
To reset all Custom Functions (except
CF-0) to 0, open the side door and
press the CF button. Then press the
 button.
105
Altered Custom Function Indicator
The Custom Functions which you have...

2. Custom Function Settings
Custom Function CF-0 makes the camera’s built-in exposure meter
compatible with the focusing screen. Be sure to set this Custom Function\
to suit the focusing screen installed in the camera.
Custom Functions CF-1 to CF-17 can be set to suit your preferences.
106
Custom Function No. Setting
Match the focusing screen CF-0 0
1
Custom Function No. Setting Description
Film rewind mode CF-10
1
2
3High-speed automatic film rewind.
No automatic film rewind.
→Pressing midroll rewind <...

107
Focusing Screen Page
Setting for focusing screen Ec-N or Ec-R ( : New Lasermatte Screen).
Setting for focusing screens Ec-A, Ec-B, Ec-C, Ec-CII, Ec-D, Ec-H, Ec-I,\
Ec-L ( : Lasermatte Screen)
L
N133
Remarks Page
Settings 1 and 3 are ideal when film rewind noise would be disturbing. 28
 08. C836-E (103~)  28-01-2003  12:53  Pagina 107 

108
Custom Function No. Setting Description
Film leader position
after film rewind
ISO film speed
setting method
AF activation
methodCF-2
CF-3
CF-40
1
0
1
0
1
2
3Rewinds the film leader into the cartridge.
Leaves the film leader outside the
cartridge.
Sets the film speed automatically with
DX-coded film.
Enables the film speed to be set
manually.
Enables AF and AE operation by pressing
the shutter button halfway.
•
AE lock with the < > button.
Enables AE and AF operations with the
  button.
• Shutter...

Custom Function Settings
109
Remarks Page
This is convenient if you develop the film yourself.
• If 1 is set, the shutter speed will always be 1/8000 sec. if you release\
the shutter with the camera back open.
This is effective if you want to set the film speed yourself.
You can be relieved from setting the film speed each time you load film.\
This is effective when you want to focus and meter at different portions\
 of
the scene.
This is effective when you want to stop AI Servo AF operation...

110
Custom Function No. Setting Description
Shutter speed and
aperture setting
method in the
Manual modeCF-50
1
2
3Enables the < > dial to set the shutter
speed and the < > dial (or the < >
button and < > dial) to set the
aperture.
Enables the < > dial to set the
aperture and the < > dial (or the < >
button and < > dial) to set the shutter
speed.
•
This reverses the functions of the
  and < > dials.
The shutter speed and aperture are set in
the same way as setting 0. In the
aperture-priority AE and...