Canon Eos 3 Owners Manual

Custom Function Settings
111
Remarks Page
This makes it easier to change the aperture during studio sessions with
studio flash units. Also, when AEB is used in the manual exposure mode,
the shutter speed can be fixed while only the aperture is shifted for AE\
B.
If you are using a super telephoto lens with more than one EOS-3 body,
you can still set the aperture with the camera(s) not attached to the \
lens.
This function is mainly for pro photographer assistants.
Same as setting 2.
• To use this Custom...

112
Custom Function No. Setting Description
Exposure setting
increments
Electronic manual
focusing.
Frame counter
displayCF-6
CF-7
CF-80
1
2
0
1
2
0
1Enables all settings to be set in 1/3-stop
increments.
Enables the shutter speed and aperture
to be set in full-stop increments, and
exposure compensation and flash
exposure compensation in 1/3-stop
increments.
Enables all exposure settings to be set in
half-stop increments.
The lenses listed on the right enable
electronic manual focusing after AF...

Custom Function Settings
113
Remarks Page
This is suited for slide films which have a narrow exposure latitude.
The shutter speed and aperture can be set in the familiar full-stop
increments.
Suited for negative films which have a wide exposure latitude.
EF 50mm f/1.0L USM, EF 85mm f/1.2L USM,
EF 200mm f/1.8L USM, EF 300mm f/2.8L USM,
EF 400mm f/2.8L USM, EF 400mm f/2.8L II USM,
EF 500mm f/4.5L USM, EF 600mm f/4L USM,
EF 1200mm f/5.6L USM, EF 28-80mm f/2.8-4L USM.
This prevents the focus from being...

114
Custom Function No. Setting Description
AEB sequence and
cancellation
Focusing point
flashing modeCF-9CF-10
0
1
2
3
0
1
2
3standard exposure, underexposure,
overexposure, then automatic
cancellation.
standard exposure, underexposure,
overexposure, and no automatic
cancellation.
Underexposure, standard exposure,
overexposure, then automatic
cancellation.
Underexposure, standard exposure,
overexposure, and no automatic
cancellation.
Standard mode
•
Flashes when focus is achieved, lights
dimly while you...

Custom Function Settings
115
Remarks Page
AEB is not canceled even when the lens is interchanged or when the film
is replaced. Therefore you can keep taking AEB shots (with the standard\
exposure first).
You can keep taking AEB shots in this sequence.
This applies during manual focusing point selection and Eye-Control AF.
During automatic focusing point selection, the focusing point does not
light dimly after focus is achieved.
If the flashing of the focusing point is annoying, you can disable it.
This...

116
Custom Function No. Setting Description
Focusing point
selection method
Mirror lockup
CF-11
CF-12
0
1
2
3
0
1Enables the focusing point to be selected
by pressing the < > button and turning
the < > dial and/or < > dial.
•
Turn the < > dial to select a
focusing point on the right or left, and
turn the < > dial to select a focusing
point on the top or bottom.
Enables the focusing point to be selected
by pressing the < > button and turning
the < > dial and/or < > dial.
Enables the < > dial alone to...

Custom Function Settings
117
Remarks Page
The functions of the < > button and < > button are reversed. This
makes the exposure compensation method and aperture setting method
(during manual exposure) the same as with the EOS-1.
This setting is identical to the EOS-1N’s Custom Function CF-11 set t\
o 2
for the left or right focusing point selection method. With this setting\
, you
can select the focusing point while pressing the shutter button halfway \
(or
within ( )after releasing the shutter button) or...

118
Custom Function No. Setting Description
Focusing point and
spot metering
linkage
Automatic reduction
of fill-in flash output
Shutter curtain
synchronization
CF-13
CF-14
CF-15
0
1
2
0
1
0
1No linkage.
•
Spot metering is always at the center.
Links spot metering to the focusing point.
• Spot metering is linked to one of 11
focusing points selected either
manually or by Eye Control.
No linkage.
• Spot metering is always at the center.
• You can select only one of 11 focusing
points.
Enable.
Disable....

Custom Function Settings
119
Remarks Page
The selectable focusing points are limited to 11. This makes focusing
point selection faster and links spot metering to the focusing point you\
select. This setting is effective for spotlighted subjects on-stage, etc\
.,
when you want to maintain the framing of the subject.
Compared to setting 0, this setting makes focusing point selection faste\
r.
(When automatic focusing point selection is used with settings 1 and 2,\
 all
45 focusing points will be subject...

120
Custom Function No. Setting Description
Safety shift
Manual focusing
point selection range
CF-16
CF-17
0
1
0
1
2Disabled.
Enabled.
•
Safety shift works in the shutter speed-
priority AE and aperture-priority AE
modes.
• If a standard exposure cannot be
obtained with the shutter speed or
aperture you have set, then the camera
automatically shifts the shutter speed
or aperture so that a standard
exposure can be obtained.
Standard
Expanded selection range
Automatically-selected range
 08. C836-E (103~)...