Canon Digital Ixus I7 User Guide

  Troubleshooting
109
Reading images from memor y card is slow.
Memory card was 
formatted in another 
device. zUse a memory card formatted in 
your camera (p. 29).
Batter y
Batter y consumed quickly.
Battery life exceeded if 
battery loses its charge 
quickly at normal 
temperature (23 °C/73 
°F). zReplace the battery with a new one 
(Basic Guide p. 8).
Batter y will not charge.
Battery life exceeded. zReplace the battery with a new one 
(Basic Guide p. 8).
• Poor connection 
between camera and 
camera...

110
Printing on Direct Print Compatible 
Printers
Cannot print.
Camera station and 
printer not properly 
connected.zAttach the camera station to the 
printer securely with the supplied 
cable.
Printer power is off.zTurn on the printer.
Incorrect print connection.zIn the   (Set up) menu, select 
[Print Method] and select [Auto] 
(p. 27).
 

  List of Messages
111
List of Messages
The following messages may appear on the LCD monitor during 
shooting or playback. Please refer to the Direct Print User Guide for 
the messages that display during a printer connection.
Busy... 
zImage is being recorded to, or read from, memory card. The 
playback mode is starting up.
No memory card
zYou turned on the camera without a memory card installed, or 
with a memory card installed in the wrong orientation (Basic 
Guide, p. 10).
Card locked! 
zThe SD...

112
Naming error! 
zThe file name could not be created because there is a file with 
the same name as the folder that the camera is attempting to 
create, or the highest possible file number has already been 
reached. In the Set up menu, set the File Numbering option to 
[Auto Reset]; alternatively, save all the images you wish to retain 
onto a computer, then reformat the memory card. Please note 
that formatting will erase all the existing images and other data.
Change the battery pack. 
zBattery...

  List of Messages
113
Cannot rotate 
zYou attempted to rotate an image recorded in a different camera 
or data type, or an image edited with a computer.
Incompatible WAVE format. 
zA sound memo cannot be added to this image since the data 
type of the existing sound memo is incorrect.
Cannot register this image! 
zYou attempted to register an image recorded in a different 
camera or a movie as a start-up image.
Cannot modify image
zYou attempted to apply a My Colors effect to a movie or an image...

114
Cannot complete! 
zCould not save a part of the print, transfer or slide show settings.
Unselectable image. 
zYou attempted to set the print settings for a non-JPEG image.
Communication error
zThe computer was unable to download the image due to the 
large amount of images (approx. 1000) stored on the memory 
card.
Lens error, restart camera
zCamera detected an error while moving the lens and cut the 
power automatically. This error message may appear if you press 
on the lens while it is moving or...

  Appendix
115
Appendix
Batter y Handling
Battery Charge
The following icon and message will display.
Batter y Handling Precautions
zKeep the battery terminals clean at all times.
Dirty terminals may cause poor contact between the battery and 
camera. Polish the terminals with a soft cotton swab before 
charging or using the battery.
zAt low temperatures, battery performance may be reduced 
and the low battery icon ( ) may appear earlier than usual.
Under these conditions, revive the battery by warming...

116
You may be able to check the charge state depending upon how 
the terminal cover is attached (Fig. C, D).
zYou are recommended to use it in the camera until it is 
completely discharged and to store it in an indoor location 
with low relative humidity and between the temperatures of 
0 – 30 °C (32 – 86 °F).
Storing a fully charged battery for long periods of time (about one 
year) may shorten its life cycle or affect its performance. If you do 
not use the battery for long periods of time, charge it...

  Appendix
117
Handling the Memor y Card
SD Memor y Card and SDHC Memor y Card 
Write Protect Tab
Cautions When Handling
zMemory cards are high-precision electronic devices. Do not 
bend them, apply force to them, or subject them to shocks 
or vibration.
zDo not attempt to disassemble or alter the memory card.
zDo not allow dirt, water or foreign objects to contact the 
terminals on the back of the card. Do not touch the 
terminals with your hands or metal objects.
zDo not peel away the original label on...

118
For matting
zPlease note that formatting (initializing) an memory card 
erases all data, including protected images.
zYou are recommended to use memory cards that have been 
formatted in your camera.
• The card supplied with the camera may be used without further 
formatting.
• When the camera is malfunctioning, a corrupted memory card 
might be the cause. Reformatting the memory card may solve 
the problem.
• When a non-Canon brand memory card is malfunctioning, 
reformatting it may solve the...