Canon Digital Ixus I7 User Guide

  Playback/Erasing
89
You can erase images from a memory card.
Erasing Images
SelectErases images one at a time as you view them.
Select by DateErases images corresponding to the selected 
date.
Select by CategoryErases images in the selected category.
Select by FolderErases images in the selected folder.
All ImagesErases all images on a memory card.
zNote that erased images cannot be recovered. Exercise 
adequate caution before erasing an image.
zProtected images cannot be erased with this function.
1...

90
Please format the memory card when you want to erase not 
only image data but also all the data contained on the card 
(p. 29).
3Select the image, date, categor y or folder 
and press  .
z[Select]
Use the   or   button to select an image and press the 
FUNC./SET button.
- Pressing the FUNC./SET button again cancels the setting.
- You can also erase images in the index playback mode.
z[Select by Date] [Select by 
Category] [Select by Folder]
Use the   or   button to select a 
date, category or folder...

  Print Settings/Transfer Settings
91
Print Settings/Transfer Settings
You can select images on a memory card for printing and specify 
the number of print copies in advance using the camera. The 
settings used on the camera comply with the Digital Print Order 
Format (DPOF) standards. This is extremely convenient for printing 
on a direct print compatible printer, or for sending the images to a 
photo developing service that supports DPOF. 
Only one copy will be printed for each selected image.
With the...

92
1Slide the mode switch to   (playback)  
(Print) Menu Select a menu item .
See Menus and Settings (p. 23).
zProceed to Step 4 if you select 
[Select All Images].
2Select the image, date, categor y or folder to 
print and press  . 
z[Select Images & Qty.]
Selection methods differ for the 
Print Type settings (p. 94).
-  (Standard)/ (Both)
Use the   or   button to select 
an image, press the FUNC./SET 
button and use the   or   but-
ton to select the number of print 
copies (up to 99).
-  (Index)
Use...

93
  Print Settings/Transfer Settings
zImages are printed in order according to the file number.
zA maximum of 998 images can be selected.
zIf you are connected to a printer, the   button will light 
blue while you are selecting images. You can start printing 
at this point by pressing the   button, confirming that 
[Print] is selected and pressing the FUNC./SET button.
z[Select by Date] [Select by 
Category] [Select by Folder]
Use the   or   button to select a 
date, category or folder and press 
the...

94
Setting the Print Style
After setting the print style, select the image(s) to print. The 
following print settings can be selected.
zThe Date and File No. settings change according to the 
Print Type as follows.
- Index
[Date] and [File No.] cannot be set to [On] at the same time.- Standard or Both
[Date] and [File No.] can be set to [On] at the same time, 
however, the printable information may vary between 
printers.
*Default setting
Print Type Standard*
Prints one image per page.
 IndexPrints the...

95
  Print Settings/Transfer Settings
zImages with date imprints created by   (Postcard Date 
Imprint Mode) (p. 35) will have the date imprinted 
regardless of the [Date] setting. Accordingly, the date may 
be printed twice if [Date] is set to [On].
zDates print in the style specified in the [Date/Time] menu 
(p. 27).
You can use the camera to specify settings for images before 
downloading to a computer. Refer to the Software Starter Guide for 
instructions on how to transfer images to your computer....

96All the Images on a Memor y Card
zImages are transferred in order according to the file 
number.
zA maximum of 998 images can be selected.
3Use the   or   button to select an image to 
transfer and press  .
zPressing the FUNC./SET button 
again deselects the setting. 
zYou can also select images in the 
index playback mode.
1 (Play) Menu .
See Menus and Settings (p. 23).
2Select [Mark all] and press  .
zSelecting [Reset] cancels all trans-
fer order settings.
3Select [OK] and press  .
Transfer Selection
 

  Viewing Images on a TV set
97
Viewing Images on a TV set
You can play back images on a television with the supplied 
AV cable.
The video output signal can be switched (NTSC or PAL) to 
accommodate different regional standards  (p. 27). The default 
setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may 
not display properly.
1Tur n off the Camera and the...

98
Customizing the Camera (My Camera Settings)
My Camera allows you to customize the start-up image and start-
up, operation, self-timer and shutter sounds. You can change and 
register these settings, enabling you to customize the camera to 
suit your own tastes.
Changing My Camera Settings
1 (My Camera) Menu  Menu item.
See Menus and Settings (p. 23).
2Select the contents you wish to set.
zSelect [Theme] to set all to the 
same settings.