Canon Digital Ixus I Zoom User Guide

69
  Playback/Erasing
Playback/Erasing
Please also see the Basic Camera User Guide (p. 11). 
To Cancel the Magnified Display
Hold down the FUNC./SET button (you can cancel immediately by 
pressing the MENU button).  
 Magnifying Images
1Press the   button. 
zWhen the   button is pressed, 
the image can be magnified up to 
10 times. Pressing the   button 
zooms out from the image.
zPressing the   or   button 
moves to the previous or next 
image in the magnified state.
2Press   and change the position of...

70
To Cancel the Index Playback
Hold down the FUNC./SET button.
Viewing Images in Sets of Nine
 (Index Playback)
1Hold down  .
zUp to nine images can be viewed 
at once.
zUse the , ,   or   button 
to change the image selection. Selected Image
Movie
 

71
  Playback/Erasing
Operating the Movie Control Panel
Use the television’s controls to adjust the volume when 
playing a movie on a TV set (p. 89).
Viewing Movies
Movies cannot be played in the index playback mode.
1Display a movie and 
press .
zImages with a   icon are 
movies.
2Select   (Play) and press  .
zThe movie will pause if you press the FUNC./SET button during 
playback. It will resume when you press the button again.
zWhen playback ends, the movie stops at the last frame 
displayed. Press...

72
You can delete portions of recorded movies.
Editing Movies
Movies 1 second or longer before editing can be edited in 1-
second increments, but those that are protected or less than 
1 second long cannot be edited. 
1Select   (Edit) in the 
movie control panel and 
press .
zThe movie editing panel and the 
movie editing bar will display.
2Use the   or   button to select   (Cut 
Beginning) or   (Cut End) and the   or   
button to specify the cut point( ).
zTo check a temporarily edited movie, select...

73
  Playback/ErasingIt may take approximately 3 minutes to save an edited movie. 
Since the edited images may not be saved if the battery runs 
out of charge partway, we recommend you use a fully charged 
battery or the compact power adapter (Basic Guide p.1).  
4Select [New File] or [Overwrite] and press 
.
z[New File] saves the edited movie 
under a new file name. The pre-
edit data is left unchanged.
Note, if you press the FUNC./SET 
button while saving the movie, 
saving is canceled.
z[Overwrite]...

74
Images can be rotated clockwise 90° or 270° in the display. 
Rotating Images in the Display
1 (Play) Menu .
See Menus and Settings (p. 30).
2Use the   or   button to select an image to 
rotate and press   to rotate it.
zCycle through the 90°/270°/original orientations with each 
press of the FUNC./SET button.
zThis also can be set in the index playback mode.
zMovies cannot be rotated.
zWhen images are downloaded to a computer, the 
orientation of images rotated by the camera will depend 
upon the...

75
  Playback/Erasing
You can select the transition effect displayed when switching 
between images. 
The transition effect will not display when an image is 
switched while the camera is reading an image from the 
memory card. 
In playback mode (including single image playback and index 
playback), you can attach sound memos (up to 60 seconds) to an 
image. The sound data is saved in the WAVE format.
Playback with Transition Effects
The displayed image darkens and the next image gradually 
brightens...

76
Sound Memo Panel
2Use the   or   button to select an image to 
attach a sound memo to and press  . 
zThe sound memo control panel will display.
3Select   (Record) and press  .
zThe elapsed time and the 
remaining time display.
zPressing the FUNC./SET button 
pauses the recording. Pressing it 
again resumes recording. 
zUp to 60 seconds of recordings 
can be added to any one image.
Exit
Record
Pause
Play
Erase
Select [Erase] in the confirmation screen and press the 
FUNC./SET 
button.
zYou cannot...

77
  Playback/Erasing
Automated Playback of Memory Card Images.
Image settings for slide shows are based on the Digital Print Order 
Format (DPOF) standard (p. 83). 
Automated Playback (Slide Shows)
All ImagesPlays all images on a memory card in order.
DatePlays images bearing a specified date in order.
FolderPlays images in a specified folder in order.
MoviePlays movie files only, in order.
StillsPlays still images only, in order.
–
Custom 1–3Plays the images selected for each slide show, 
Custom 1,...

78
Transition Effects
You can select the transition effect used when one image is 
replaced by another.
In single image playback mode, you can start a slide show 
from the current image displayed by holding the FUNC./SET 
button while you press the   button. Please note that if 
you do this while the last image shot is displayed, the slide 
show will start from the first image using the same date.  
3Select [Start] and press  .
zThe following functions are 
available during slide shows.
-...