Canon Digital Ixus I Zoom User Guide

							69
  Playback/Erasing
Playback/Erasing
Please also see the Basic Camera User Guide (p. 11). 
To Cancel the Magnified Display
Hold down the FUNC./SET button (you can cancel immediately by 
pressing the MENU button).  
 Magnifying Images
1Press the   button. 
zWhen the   button is pressed, 
the image can be magnified up to 
10 times. Pressing the   button 
zooms out from the image.
zPressing the   or   button 
moves to the previous or next 
image in the magnified state.
2Press   and change the position of the dis-
played portion with the  ,  ,   or   but-
ton.
zThe   icon will display and the display will change to 
the display position change mode. If you press the FUNC./
SET button again, followed by the 
 or  button, you 
can change the magnification level. Pressing the   or   
button moves to the previous or next image.
Movie frames and index playback images cannot be 
magnified.
Approximate Location of 
the Displayed Area
 
						

							70
To Cancel the Index Playback
Hold down the FUNC./SET button.
Viewing Images in Sets of Nine
 (Index Playback)
1Hold down  .
zUp to nine images can be viewed 
at once.
zUse the , ,   or   button 
to change the image selection. Selected Image
Movie
 
						

							71
  Playback/Erasing
Operating the Movie Control Panel
Use the television’s controls to adjust the volume when 
playing a movie on a TV set (p. 89).
Viewing Movies
Movies cannot be played in the index playback mode.
1Display a movie and 
press .
zImages with a   icon are 
movies.
2Select   (Play) and press  .
zThe movie will pause if you press the FUNC./SET button during 
playback. It will resume when you press the button again.
zWhen playback ends, the movie stops at the last frame 
displayed. Press the FUNC./SET button to display the 
movie control panel.
Ends playback and returns to single image playback
Print (An icon will display when a printer is connected. See the Direct 
Print User Guide for details.) 
Play
Displays the first frame
Previous Frame (Rewinds if the FUNC./SET button is held down)
Next Frame (Fast forwards if the FUNC./SET button is held down)
Displays the last frame
Edit (Switches to movie editing mode) 
(p. 72)
Volume Level 
(Adjust with the   
or  button)Movie Control Panel
 
						

							72
You can delete portions of recorded movies.
Editing Movies
Movies 1 second or longer before editing can be edited in 1-
second increments, but those that are protected or less than 
1 second long cannot be edited. 
1Select   (Edit) in the 
movie control panel and 
press .
zThe movie editing panel and the 
movie editing bar will display.
2Use the   or   button to select   (Cut 
Beginning) or   (Cut End) and the   or   
button to specify the cut point( ).
zTo check a temporarily edited movie, select   (Play) and 
press the FUNC./SET button.
zSelecting   (Exit) cancels the edit and restores the movie 
control panel. 
3Select   (Save) and press  .
Movie Editing Bar
Movie Editing Panel
 
						

							73
  Playback/ErasingIt may take approximately 3 minutes to save an edited movie. 
Since the edited images may not be saved if the battery runs 
out of charge partway, we recommend you use a fully charged 
battery or the compact power adapter (Basic Guide p.1).  
4Select [New File] or [Overwrite] and press 
.
z[New File] saves the edited movie 
under a new file name. The pre-
edit data is left unchanged.
Note, if you press the FUNC./SET 
button while saving the movie, 
saving is canceled.
z[Overwrite] saves the edited 
movie with its original name. The pre-edit data is lost.
zWhen there is not enough space left on the memory card, 
only [Overwrite] can be selected.
 
						

							74
Images can be rotated clockwise 90° or 270° in the display. 
Rotating Images in the Display
1 (Play) Menu .
See Menus and Settings (p. 30).
2Use the   or   button to select an image to 
rotate and press   to rotate it.
zCycle through the 90°/270°/original orientations with each 
press of the FUNC./SET button.
zThis also can be set in the index playback mode.
zMovies cannot be rotated.
zWhen images are downloaded to a computer, the 
orientation of images rotated by the camera will depend 
upon the software used to download the images.
Original 90° 270°
 
						

							75
  Playback/Erasing
You can select the transition effect displayed when switching 
between images. 
The transition effect will not display when an image is 
switched while the camera is reading an image from the 
memory card. 
In playback mode (including single image playback and index 
playback), you can attach sound memos (up to 60 seconds) to an 
image. The sound data is saved in the WAVE format.
Playback with Transition Effects
The displayed image darkens and the next image gradually 
brightens until it is displayed.
Press the   button to have the previous image display from the left 
and the   button to have the next image display from the right. 
1 (Play) Menu / .
See Menus and Settings (p. 30).
Attaching Sound Memos to Images
1 (Play) Menu .
See Menus and Settings (p. 30).
 
						

							76
Sound Memo Panel
2Use the   or   button to select an image to 
attach a sound memo to and press  . 
zThe sound memo control panel will display.
3Select   (Record) and press  .
zThe elapsed time and the 
remaining time display.
zPressing the FUNC./SET button 
pauses the recording. Pressing it 
again resumes recording. 
zUp to 60 seconds of recordings 
can be added to any one image.
Exit
Record
Pause
Play
Erase
Select [Erase] in the confirmation screen and press the 
FUNC./SET 
button.
zYou cannot attach sound memos to movies.
zSound memos for protected images cannot be erased.
Vo l u m e
(Adjust with the   or 
 button)
Elapsed Time/
Remaining TimeSound Memo Panel
 
						

							77
  Playback/Erasing
Automated Playback of Memory Card Images.
Image settings for slide shows are based on the Digital Print Order 
Format (DPOF) standard (p. 83). 
Automated Playback (Slide Shows)
All ImagesPlays all images on a memory card in order.
DatePlays images bearing a specified date in order.
FolderPlays images in a specified folder in order.
MoviePlays movie files only, in order.
StillsPlays still images only, in order.
–
Custom 1–3Plays the images selected for each slide show, 
Custom 1, Custom 2 or Custom 3, in order
(p. 79).
1 (Play) Menu .
See Menus and Settings (p. 30).
2Select , , , ,  or – .
zFor   or  , select the image date 
or folder to be played back (p. 79).
zFor ,  or , select the 
images to be played back (p. 79).
zIf you want to add a transition 
effect to play back images, use 
the   button to select [Effect] 
and choose the type of effect with the   or   button (See 
the next page).
 
						

							78
Transition Effects
You can select the transition effect used when one image is 
replaced by another.
In single image playback mode, you can start a slide show 
from the current image displayed by holding the FUNC./SET 
button while you press the   button. Please note that if 
you do this while the last image shot is displayed, the slide 
show will start from the first image using the same date.  
3Select [Start] and press  .
zThe following functions are 
available during slide shows.
- Pausing/resuming the slide 
show: press the FUNC./SET 
button
- Fast forwarding/rewinding the 
slide show: press the   or   button (continue to hold the 
button to switch between images more rapidly)
- Stopping the slide show: press the MENU button.
The new image gradually brightens as it moves upward from the 
bottom.
The new image first appears in a cross shape and gradually expands 
to display the full image.
Portions of the new image move horizontally, then the image expands 
to display the full image.