Canon Digital Ixus 30 User Guide

129
Print Settings
 When the print type is set to [Index], the [Date] and [File No.] 
options cannot be set to [On] at the same time.

If you selected [Standard] or [Both] as the Print Type, you can also 
set the Date and File No. settings to [On] at the same time. However, 
the data that is supported may vary among printers.
 Embedded dates in   (Postcard Date Imprint mode, p. 74) print 
out even when [Date] is set to [Off].
The date prints in the format specified in the Date/Time menu (p. 31).
3Use...

130
Image Transmission Settings (DPOF Transfer Order)
You can use the camera to specify settings for images before downloading 
to a computer. Refer to the Canon Digital Camera Software Starter Guide 
Disk for instructions on how to transfer images to your computer.
The settings used on the camera comply with the Digital Print Order Format 
(DPOF) standards.
The   icon may display for an SD card that has had transfer settings 
set by a different DPOF-compliant camera. These settings will be 
overwritten...

131
Image Transmission Settings (DPOF Transfer Order)
 Images are transferred in order from oldest to newest by the 
shooting date.
 A maximum of 998 images can be selected per SD card.
3Use the   or   button to move 
between images and the   or   
button to select and deselect them.
 A checkmark displays on selected images.
 You can press the zoom lever toward   
to switch to the index mode (3 images) 
and use the same procedures to select 
images.
 While in index playback, pressing the 
FUNC./SET...

132
Connecting the Camera to a Computer
The following methods can be used to download images recorded by the 
camera to a computer. Please read Computer System Requirements (p. 
133) in advance.
 Downloading via a Camera to Computer Connection
 Downloading Directly from an SD Card
See Downloading Directly from an SD Card (p. 139).
With this method, you download images using computer commands 
after you have installed the appropriate software. 
See Connecting the Camera to a Computer (p. 133), and the...

133
Connecting the Camera to a Computer
Connecting the Camera to a Computer
Computer System Requirements
Please install and use the software on a computer which meets the 
requirements below.
Windows
Macintosh
OSWindows 98 (Second Edition (SE) Only)
Windows Me
Windows 2000 (Service Pack 4 Only)
Windows XP (Including Service Pack 1)
Computer ModelThe above OS should be pre-installed on computers with built-in USB 
ports.
CPUPentium 500 MHz or higher processor is required
RAMWindows 98 SE/Windows Me: 128...

134
The camera will not operate correctly if you connect it to your 
computer before installing the driver and software. If this happens, 
please refer to the Troubleshooting section of the Canon Digital 
Camera Software Starter Guide Disk.  
 You do not need to turn off the camera or computer power when 
making a USB connection.
 Please refer to your computer’s manual for information regarding the 
location of the USB port.
 You are recommended to use a fully charged battery pack or the AC 
Adapter...

135
Connecting the Camera to a Computer
 
If the event dialog fails to appear, click the [Start] menu, and select 
[Programs] or [All Programs], followed by [Canon Utilities], 
[CameraWindow], and [CameraWindow].
 Please see How to Open the Terminal Cover (pp. 13, 16).
 Insert the interface cable until it clicks into place.
 Treat the connector area with great care while you attach and remove 
the interface cable.
 Always grasp the connector’s sides to remove the interface cable 
from the cameras...

136
  
The following window will display.   
 Using the software and computer to download images:
See the Canon Digital Camera Software Starter Guide Disk.
 Using the Camera to Download Images (Direct Transfer Function)
See Downloading Images by Direct Transfer (p. 137).
 

137
Connecting the Camera to a Computer
Downloading Images by Direct Transfer
Use this method to download images using camera operations. 
Install the supplied software and adjust the computer settings before using 
this method for the first time (p. 134).   
All Images/New Images/DPOF Trans. Images 
All ImagesTransfers and saves all images to the computer. 
New ImagesTransfers and saves to the computer only the 
images that have not been previously transferred.
DPOF Trans. ImagesTransfers and saves to...

138Select & Transfer/Wallpaper  
Only JPEG format images can be downloaded as wallpaper for the 
computer. They are automatically converted to the BMP format after 
downloading. 
The option selected with the   button is retained even when the 
cameras power is turned off. The previous setting will be in effect the 
next time the Direct Transfer menu is displayed. The image selection 
screen will appear directly when the [Select & Transfer] or the 
[Wallpaper] option was last selected.
2Use the   or...