Canon Digital Ixus 30 User Guide

							129
Print Settings
 When the print type is set to [Index], the [Date] and [File No.] 
options cannot be set to [On] at the same time.

If you selected [Standard] or [Both] as the Print Type, you can also 
set the Date and File No. settings to [On] at the same time. However, 
the data that is supported may vary among printers.
 Embedded dates in   (Postcard Date Imprint mode, p. 74) print 
out even when [Date] is set to [Off].
The date prints in the format specified in the Date/Time menu (p. 31).
3Use the   or   button to select 
[Print Type], [Date] or [File No.] 
and the   or   button to select an 
option.
 (Print Type)
Select [Standard], [Index] or [Both].
 (Date)
Select [On] or [Off].
 (File No.)
Select [On] or [Off].
4Press the MENU button.
The Print Order menu will reappear. 
Pressing the MENU button again returns to 
the Play menu. Press it again to go back to 
the playback screen.
 
						

							130
Image Transmission Settings (DPOF Transfer Order)
You can use the camera to specify settings for images before downloading 
to a computer. Refer to the Canon Digital Camera Software Starter Guide 
Disk for instructions on how to transfer images to your computer.
The settings used on the camera comply with the Digital Print Order Format 
(DPOF) standards.
The   icon may display for an SD card that has had transfer settings 
set by a different DPOF-compliant camera. These settings will be 
overwritten by those set by your camera.
Selecting Images for Transferring
1In the   (Play) menu, select   
and press the FUNC./SET button.
See Selecting Menus and Settings (p. 49).
2Use the   or   button to select 
[Order] and press the FUNC./SET 
button.
All transfer settings for the image are 
canceled when you select [Reset].
 
						

							131
Image Transmission Settings (DPOF Transfer Order)
 Images are transferred in order from oldest to newest by the 
shooting date.
 A maximum of 998 images can be selected per SD card.
3Use the   or   button to move 
between images and the   or   
button to select and deselect them.
 A checkmark displays on selected images.
 You can press the zoom lever toward   
to switch to the index mode (3 images) 
and use the same procedures to select 
images.
 While in index playback, pressing the 
FUNC./SET button displays the menu for 
selecting or deselecting all images. Use 
the   or   button to select [Mark all] 
or [Clear all] and press the FUNC./SET 
button.
4Press the MENU button.
The Transfer Order menu reappears. 
Pressing the MENU button again returns to 
the Play menu. Press it again to go back to 
the playback screen.
Selected for Transfer
 
						

							132
Connecting the Camera to a Computer
The following methods can be used to download images recorded by the 
camera to a computer. Please read Computer System Requirements (p. 
133) in advance.
 Downloading via a Camera to Computer Connection
 Downloading Directly from an SD Card
See Downloading Directly from an SD Card (p. 139).
With this method, you download images using computer commands 
after you have installed the appropriate software. 
See Connecting the Camera to a Computer (p. 133), and the separate 
Canon Digital Camera Software Starter Guide Disk.
With this method, you download images using camera button 
operations after you have installed the appropriate software (the 
computer settings only need to be adjusted for the first download). 
See Connecting the Camera to a Computer (p. 133) and Downloading 
Images by Direct Transfer (p. 137). 
With this method, you download images using computer commands 
without installing any software. 
See Connecting the Camera to a Computer (p. 133) (Software 
Installation Not Required) and Connecting the Camera to the 
Computer to Download Images without Installing Software (p. 139).  Windows
98Windows
MeWindows
2000Windows
XPMac
OS X
Windows
98Windows
MeWindows
2000Windows
XP
Windows
XPMac 
OS X
 
						

							133
Connecting the Camera to a Computer
Connecting the Camera to a Computer
Computer System Requirements
Please install and use the software on a computer which meets the 
requirements below.
Windows
Macintosh
OSWindows 98 (Second Edition (SE) Only)
Windows Me
Windows 2000 (Service Pack 4 Only)
Windows XP (Including Service Pack 1)
Computer ModelThe above OS should be pre-installed on computers with built-in USB 
ports.
CPUPentium 500 MHz or higher processor is required
RAMWindows 98 SE/Windows Me: 128 MB or more
Windows 2000/Windows XP: 256 MB or more
InterfaceUSB
Free Hard Disk 
Space Canon Utilities
- ZoomBrowser EX: 250 MB or more 
(Including the PhotoRecord printing program)
- PhotoStitch: 40 MB or more
 Canon Camera TWAIN Driver: 25 MB or more
 Canon Camera WIA Driver: 25 MB or more
Display1,024 x 768 pixels / High Color (16 bit) or better is required
OSMac OS X (v10.1.5 – v10.3)
Computer ModelThe above OS should be pre-installed on computers with built-in USB 
ports.
CPUPowerPC G3/G4/G5
RAM256 MB or more
InterfaceUSB
Free Hard Disk 
Space Canon Utilities
- ImageBrowser: 200 MB or more 
- PhotoStitch: 40 MB or more
Display1,024 x 768 pixels / 32,000 colors or better is required
 
						

							134
The camera will not operate correctly if you connect it to your 
computer before installing the driver and software. If this happens, 
please refer to the Troubleshooting section of the Canon Digital 
Camera Software Starter Guide Disk.  
 You do not need to turn off the camera or computer power when 
making a USB connection.
 Please refer to your computer’s manual for information regarding the 
location of the USB port.
 You are recommended to use a fully charged battery pack or the AC 
Adapter Kit ACK-DC10 (sold separately) to power the camera when 
connecting to a computer (p. 21).
 All procedures performed with a connection to a USB 2.0 compliant 
board are not guaranteed.    
1Install the driver and the software applications bundled on 
the Canon Digital Camera Solution Disk (first time only). 
 Please see the Canon Digital Camera Software Starter Guide Disk for 
the installation procedures.
 With a Macintosh, it is next necessary to set the ImageBrowser auto 
start settings. Please see the Canon Digital Camera Software Starter 
Guide Disk for details.
2Use the supplied interface cable to connect the 
computers USB port to the cameras DIGITAL terminal. 
IMPORTANT
You must install the software and driver bundled on the supplied 
Canon Digital Camera Solution Disk onto your computer before 
connecting the camera to a computer.
USB PortDIGITAL Terminal
Interface Cable
 
						

							135
Connecting the Camera to a Computer
 
If the event dialog fails to appear, click the [Start] menu, and select 
[Programs] or [All Programs], followed by [Canon Utilities], 
[CameraWindow], and [CameraWindow].
 Please see How to Open the Terminal Cover (pp. 13, 16).
 Insert the interface cable until it clicks into place.
 Treat the connector area with great care while you attach and remove 
the interface cable.
 Always grasp the connector’s sides to remove the interface cable 
from the cameras DIGITAL terminal. 
3Set the mode switch to   (Playback).
4Press the ON/OFF button until the power lamp lights green.
5Select [Canon CameraWindow] in the event dialog that 
appears on the computer and click [OK] (first time only). 
Windows:
Proceed to step 5 below.
 Macintosh:
Refer to the Canon Digital Camera Software Starter Guide Disk and 
download images.
 
						

							136
  
The following window will display.   
 Using the software and computer to download images:
See the Canon Digital Camera Software Starter Guide Disk.
 Using the Camera to Download Images (Direct Transfer Function)
See Downloading Images by Direct Transfer (p. 137).
 
						

							137
Connecting the Camera to a Computer
Downloading Images by Direct Transfer
Use this method to download images using camera operations. 
Install the supplied software and adjust the computer settings before using 
this method for the first time (p. 134).   
All Images/New Images/DPOF Trans. Images 
All ImagesTransfers and saves all images to the computer. 
New ImagesTransfers and saves to the computer only the 
images that have not been previously transferred.
DPOF Trans. ImagesTransfers and saves to the computer only the images 
with DPOF Transfer Order settings (p. 130).
Select & TransferTransfers and saves single images to the 
computer as you view and select them.
WallpaperTransfers and saves single images to the computer as 
you view and select them. The transferred images 
display on the computer desktop.
1Confirm that the Direct Transfer 
menu is displayed on the cameras 
LCD monitor. 
 The   button will light blue.
 Press the MENU button if the Direct 
Transfer menu fails to appear.
2Use the   or   button to select 
,   or  , and press the   
button.
 To cancel the transfer, press the FUNC./SET 
button.
The images will download. The   
button will blink blue while downloading is 
in progress. The display will return to the 
Direct Transfer menu when the download is 
complete.
 
						

							138Select & Transfer/Wallpaper  
Only JPEG format images can be downloaded as wallpaper for the 
computer. They are automatically converted to the BMP format after 
downloading. 
The option selected with the   button is retained even when the 
cameras power is turned off. The previous setting will be in effect the 
next time the Direct Transfer menu is displayed. The image selection 
screen will appear directly when the [Select & Transfer] or the 
[Wallpaper] option was last selected.
2Use the   or   button to select 
 or  , and press the   
button (or FUNC./SET button).
3Use the   or   button to select 
images to download and press the 
 button (or FUNC./SET button).
The images will download. The   
button will blink blue while downloading is 
in progress.
4Press the MENU button. 
The Direct Transfer menu will reappear.