Canon Digital Ixus 30 User Guide

109
Playback
Editing Movies
Selecting   (Edit) in the movie control panel enables you to cut unwanted 
portions at the start or end of a movie clip.
Protected movies and movies less than 1 second in duration cannot 
be edited.
1Use the   or   button to select a 
movie and press the FUNC./SET 
button.
2Switch to the movie editing mode.
See Operating the Movie Control Panel (p. 
107).
 The movie editing panel and the movie 
editing bar will display.
3Use the   or   button to select 
 or   and the   or...

110
 The minimum duration of a movie that can be edited is 1 second.
 It may take approximately 3 minutes to save an edited movie. If the 
battery pack runs out of charge partway through, edited movie clips 
cannot be saved. When editing movies, use a fully charged battery 
pack or the separately sold AC Adapter Kit ACK-DC10 (p. 154).
4Use the   or   button to select 
 (Play) and press the FUNC./SET 
button.
 A preview of the temporarily edited movie 
clip plays.
 To stop it, press the FUNC./SET...

111
Playback
Rotating Images in the Display
Images can be rotated clockwise 90° or 270° in the display.
 Movies cannot be rotated.
 When images are downloaded to a computer, the orientation of 
images rotated by the camera will depend upon the software used 
to download the images.
 Images can be magnified when rotated (p. 104).
 Images taken vertically with Auto Image Rotate (p. 99) set to [On] 
will automatically be rotated to the vertical position when viewed on 
the camera’s LCD monitor.
1In the...

112
Attaching Sound Memos to Images
In playback mode (including single image playback, index playback, and 
magnifying playback), you can attach sound memos (up to 60 seconds) to 
an image. The sound data is saved in the WAVE format.
Exiting Sound Memos
Press the MENU button.
1In the   (Play) menu, select   
and press the FUNC./SET button.
See Selecting Menus and Settings (p. 49).
2Use the   or   button to select an 
image and press the FUNC./SET 
button.
The sound memo control panel will display.
3Use...

113
Playback
Playing/Erasing Sound Memos
 You cannot attach sound memos to movies.
 The “Memory card full” message will display when the SD card is full 
and you will be unable to record sound memos to that card.
 If an incompatible sound memo is attached to an image, you will be 
unable to record or play sound memos for that image, and the 
“Incompatible WAVE format” message will display. You can erase 
incompatible sound data using the camera.
 Sound memos for protected images cannot be erased.
The...

114
Automated Playback (Slide Shows)
Starting a Slide Show
A selection of images or all the images on an SD card can be displayed one-
by-one in an automated slide show.
Slide show image settings are based on DPOF standards (p. 124).  
All ImagesPlays all images on the SD card in order.
Slide Show 1-3
Plays the images selected for each slide show in order (p. 115).
1In the   (Play) menu, select   
and press the FUNC./SET button.
See Selecting Menus and Settings (p. 49).
 The Slide Show menu will...

115
Playback
 Movies play for their entire recorded length regardless of the time 
set in the slide show settings.
 The power-saving function does not activate during a slide show 
(p. 55). 
Pausing/Resuming a Slide Show
Fast Forwarding/Rewinding a Slide Show
Stopping a Slide Show
Selecting Images for Slide Shows
You can mark images for inclusion in slide shows 1-3. Up to 998 images may be 
marked per slide show. Images display in the order of their selection.
4Press the MENU button.
The display will...

116
2Use the   or   button to select 
[Program] and 
the  or  button to 
select [Show 1], [Show 2] or [Show 3].
A white checkmark will appear beside a 
show already containing images.
3Use the   or   button and the   
or   button to choose [Select] and 
press the FUNC./SET button.
4Select images for the Slide Show
 Use the   or   button to move between 
images and the   or   button to select 
or deselect them. Selected images display 
a number corresponding to their selection 
order and a white...

117
Playback
Adjusting the Play Time and Repeat Settings
You can change the play time for all the images in a show and have the 
show repeat continuously. 
 The display interval may vary slightly from the set time for some 
images when played.
 Slide shows are easy to arrange on a computer with the supplied 
software (ZoomBrowser EX/ImageBrowser). See the Canon Digital 
Camera Software Starter Guide Disk.
Play TimeSets the duration that each image displays. Choose between 3-10 
seconds, 15 seconds, 30...

118
Protecting Images
You can protect important images and movies from accidental erasure.
To Cancel Protection
After step 1, select an image to remove protection from and press the 
FUNC./SET button.
Please note that formatting (initializing) an SD card erases all data, 
including protected images (p. 28).
1In the   (Play) menu, select   
and press the FUNC./SET button.
See Selecting Menus and Settings (p. 49).
2Use the   or   button to select an 
image to protect and press the 
FUNC./SET button.
 The...