Canon Digital Ixus 30 User Guide

99
Shooting
Setting the Auto Rotate Function
Your camera is equipped with an Intelligent Orientation sensor that detects 
the orientation of an image shot with the camera held vertically and 
automatically rotates it to the correct viewing orientation in the display. You 
can set this function on/off.
 This function may not operate correctly when the camera is pointed 
straight up or down. Check that the arrow   is pointing in the right 
direction and if it is not, then set the Auto Rotate function to...

100
Resetting the File Number
The images you shoot are automatically assigned file numbers. You can 
select how the file number is assigned.    
Setting the File No. Reset to [Off] is useful for avoiding file name 
duplication when images are downloaded to a computer.
OnThe file number is reset to the start (100-0001) each time a new SD 
card is inserted. New images recorded on SD cards with existing files 
are assigned the next available number.
OffThe file number of the last image to be shot is...

101
Shooting
About File Numbers and Folder Numbers
Images are assigned file numbers from 0001 to 9900, and folders are 
assigned folder numbers from 100 to 998 (Folder numbers cannot 
contain 99 in the last two digits).
Folder File Capacity
Each folder usually contains up to 100 images.
However, since images shot in continuous shooting and Stitch Assist 
mode are always saved into the same folder, a folder may contain 
more than 100 images. The number of images may also exceed 100 if 
a folder contains...

102
 

103
Playback
Playback
Displaying Images Individually
1Slide the mode switch to  
(Playback).
The last recorded image will appear in the 
display (single image playback).
2Use the   or   button to move 
between the images.
Use the   button to move to the previous 
image and the   button to move the next 
image. 
Holding the button down advances the 
images more rapidly, but the images will not 
appear as clearly.
 

104
 
Magnifying Images
To Cancel the Magnified Display
Press the zoom lever toward  . You can also cancel it immediately by 
pressing the MENU button. 
Movie frames and index playback images cannot be magnified.
1Press the zoom lever toward  .
 
will appear on the monitor. You 
can press the zoom lever toward   to 
display the image at a magnification of up to 
10x.
2Use the  ,  ,   or   button to 
move around the image.
3Press the FUNC./SET button.
 The image advance mode will become 
active and...

105
Playback
Viewing Images in Sets of Nine (Index Playback)  
Switching between Sets of Nine Images
To Return to Single Image Playback
Press the zoom lever toward  .
1Press the zoom lever toward  .
Up to nine images can be viewed at once in 
index playback.
2Use the  ,  ,   or   button to 
change the image selection.
1Press the zoom lever toward   
while in index playback.
2Use the   or   button to move to 
the previous set or the next set of 
images.
Hold the FUNC./SET button down and press 
the   or...

106
Viewing Movies
You can play movie clips shot in  mode.
Movies cannot be played in the index playback mode.
1Use the   or   button to select a 
movie.
Images with a   icon are movies.
2Press the FUNC./SET button.
 The movie control panel will display.
 Use the   or   button to adjust the 
sound volume.
3Use the   or   button to select 
 (Play) and press the FUNC./SET 
button.
 The movie and sound will play.
 When playback ends, the movie stops at 
the last frame displayed. Press the FUNC./
SET...

107
Playback
Pausing and Resuming Play
Operating the Movie Control Panel
Press the FUNC./SET button during 
playback.
The movie playback pauses. Press the 
FUNC./SET button again to resume.
1Select a movie and press the 
FUNC./SET button (p. 106).
The movie control panel will display.
2Use the   or   button to select 
one of the following and press the 
FUNC./SET button.
: Exit (Ends playback and returns to 
single image playback. Pressing the 
MENU button also returns to single 
image playback.)
:Play
:...

108
 Movies recorded with high resolutions and frame rates may 
momentarily stop playing if played on slow reading SD cards.
 Movies recorded at the   Fast Frame Rate setting and with the 
video signal set to the PAL format,  may play back with a frame rate 
lower than the recorded one when output to a TV or video. You can 
play every frame by using the slow motion playback. To check the 
images at the original frame rate, you are recommended to play the 
movie back on the cameras LCD monitor or on a...