Canon cinema EOS1D C User Manual

							31
Transferring Images Individually
4Select [Transfer with SET].
 Select [Enable].
5Select the image.
 Press the  button on the 
camera.
 Select the image to transfer, and then 
press  to transfer the image.
 Movies cannot be transferred with 
this function. If you select a movie 
and press , the movie 
playback panel will be displayed. 
						

							Transferring Images Individually
32
You can add a registered caption to each image before transfer. This is 
convenient if you want to inform the recipient of the quantity to print, for 
example. The caption is also added to images stored on the camera.
For instructions on creating and registering captions, see page 
100.
You can check the captions added to images in the user comments 
included in the Exif information.
1Take the picture.
2Select [Communication settings].
3Select [Network settings].
 Once [Communication func] is set 
to [Enable], you can select [Network 
settings].
Adding a Caption Before Transfer 
						

							33
Transferring Images Individually
4Select [Transfer with caption].
XThe last captured image is displayed.
 It is not possible to select other 
images on the [Transfer with 
caption] screen. To select another 
image for transfer with a caption, play 
back that image before following 
these steps.
5Select a caption.
 Turn the  dial to select the 
[Caption] box, and then press .
 Turn the  dial to select the 
caption content, and then press 
.
6Transfer the image.
 Turn the  dial to select 
[Transfer], and then press . 
						

							34
After shooting, you can select multiple images as desired and transfer 
them all at once. You can transfer unsent images or images whose 
transfer failed previously.
You can continue still photo shooting even while images are being 
transferred. 
1On the [32] tab, select [Image 
transfer].
2Select [Image sel./transfer].
3Select [Sel.Image].
XAn image is displayed.
Batch Transfer
Selecting Images to Transfer 
						

							35
Batch Transfer
4Select images to transfer.
 Press  and turn the  dial to 
display  in the upper left corner 
of the images to transfer.
 Press  to confirm your selection.
You can select up to 9,999 images.
 To display three images per screen, 
hold the  button and turn the 
 dial left. To display one image 
per screen, hold the  button and 
turn the  dial right.
 After selecting images to transfer, 
press the  button.
5Transfer the images.
 Select [FTP transfer].
 Select [OK] on the confirmation 
screen displayed next.
XA transfer progress screen is 
displayed. 
						

							Batch Transfer
36
Selecting [RAW+JPEG transfer] in step 
2 on page 34 will give you the option of 
transferring RAW images, JPEG images, 
or both types of images.
The options will be the same whether 
you specify [Sel. Image], [Sel. n], or 
[All image] as the image selection 
method.
You can use the menu even during image transfer. However, to prevent 
transfer problems, some menu items are unavailable during transfer, 
such as [Communication settings], [Protect images], [Erase 
images], [Format card], and [Record func+card/folder sel.].
1On the [32] tab, select [Image 
transfer].
2Select [Image sel./transfer].
[RAW+JPEG transfer] Options
Menu Operation During Image Transfer
Batch Transfer of Images in a Folder
If you shoot a movie during the image transfer of captured images, the 
image transfer will be temporary cancelled during movie shooting. 
						

							37
Batch Transfer
3Select [Sel.n].
4Select [Folder images not 
transfer’d].
 To transfer images whose transfer 
previously failed, select [Folder 
images failed transf.].
5Select a folder.
6Transfer the images.
 Select [FTP transfer].
 Select [OK] on the confirmation 
screen displayed next.
XA transfer progress screen is 
displayed.
Selecting [Clear folder transf. history] will set the transfer history of 
images in the selected folder to “unsent.” This enables you to resend all the 
images in the folder later by selecting [Folder images not transfer’d]. 
						

							Batch Transfer
38
1On the [32] tab, select [Image 
transfer].
2Select [Image sel./transfer].
3Select [All image].
4Select [Card images not 
transferred].
 To transfer images whose transfer 
previously failed, select [Card 
images failed transfer].
Batch Transfer of Images on Memory Cards 
						

							39
Batch Transfer
5Transfer the images.
 Select [FTP transfer].
 Select [OK] on the confirmation 
screen displayed next.
XA transfer progress screen is 
displayed.
Selecting [Clear card’s transf. history] will set the transfer history of 
images on the memory card to “unsent.” This enables you to resend all the 
images on the card later by selecting [Card images not transferred]. 
						

							40
To check the transfer history in [Image sel./transfer], select 
[Sel.Image].
Image not selected for transfer 
(no mark)
Image selected for transfer 
Image whose transfer failed
Image already transferred
Checking Image Transfer History
Checking the Transfer History of Individual Images