Canon cinema EOS C100 Mark II User Manual
Here you can view all the pages of manual Canon cinema EOS C100 Mark II User Manual. The Canon manuals for Cinema are available online for free. You can easily download all the documents as PDF.
Page 141
141 Audio Output Audio Output The camcorder can output audio from the HDMI OUT terminal, AV OUT terminal or × (headphone) terminal. When audio is output from the AV OUT terminal or × (headphone) terminal, you can configure other settings, such as the output channel. Selecting the Audio Channel You can select the audio channel that is output from the AV OUT terminal or × (headphone) terminal. 1 Open the [Monitor Channels] submenu. [¡Audio Setup] > [Audio Output] > [Monitor Channels] 2 Select the...
Page 142
Audio Output 142 Selecting the Output Level of the AV OUT Terminal You can select the output level of audio that is output from the AV OUT terminal. 1 Open the audio ouput [Level] submenu. [¡Audio Setup] > [Audio Output] > [Level] 2 Select the desired level and then press the joystick. Options NOTES • This setting does not affect audio output to headphones. Operating modes: [1 Vrms]: The audio output level is normal. [2 Vrms]: The audio output level is 6 dB higher. [¡Audio Setup] [Audio Output] [Level]...
Page 143
143 Saving Clips to a Computer Saving Clips to a Computer You can use the supplied software Data Import Utility to save your AVCHD and MP4 clips. Refer to PIXELA's Web site below (English only) for the latest information about the software. http://www.pixela.co.jp/oem/canon/e/index_biz.html For other inquires regarding the software, consult a Canon Service Center. Saving Clips Using Data Import Utility: • Save clips to the computer. • Join relay clips (A 43) that were saved on separate SD cards and...
Page 145
7 145 Wi-Fi Functions About the Wi-Fi Functions After you connect the camcorder to a network via Wi-Fi (A146), you can use the following functions. You can save up to 5 network configurations and switch easily between them depending on your working environment. You can check the current network settings on the status screens (A181) and change them if necessary (A152). Wi-Fi functions and connection types 1Connection to a Wi-Fi network via an external access point (wireless router, etc.).2Direct...
Page 146
Connecting to a Wi-Fi Network 146 Connecting to a Wi-Fi Network The camcorder is Wi-Fi certified and can connect to a Wi-Fi network using an external access point (wireless router) or can itself serve as a Wi-Fi access point. The camcorder can connect to wireless routers (access points) compliant with the 802.11a*/b/g/n protocol and that are Wi-Fi certified (bear the logo shown on the right). The camcorder offers 5 ways to connect to a Wi-Fi network and the method you use will depend on the type and...
Page 147
147 Connecting to a Wi-Fi Network 4 Within 2 minutes, press the joystick on the camcorder. • While [Connecting] appears on the screen, you can press the joystick or the CANCEL button to cancel the operation. • After the connection is correctly established, continue with the procedure to configure the IP address assignment (A150). NOTES • The [WPS: Button] method may not work correctly if there are several active access points in the area. In such case try using [WPS: PIN Code] or [Search for Access...
Page 148
Connecting to a Wi-Fi Network 148 3 Push the joystick up/down to select the desired access point and then press the joystick. • If the access point is encrypted (C), enter the encryption key (password) with the following procedure. Otherwise, continue with the procedure to configure the IP address assignment (A150). Encrypted Access Points 1 If necessary, select the WEP index key. • This step is only necessary if the Wi-Fi network’s authentication method is set to [Shared Key] or if the encryption...
Page 149
149 Connecting to a Wi-Fi Network Manual Setup If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to. Follow the instructions on the screen to complete the procedure. 1 Open the [Set Up New] submenu. [w Other Functions] > [Network Settings] > [Connection Settings] > [Set Up New] 2 Select the [Manual] method. [Infrastructure] > [Manual] 3 To enter the [SSID] (network name), select [Input] and then press the joystick. • Enter the SSID (network name) of the...
Page 150
Connecting to a Wi-Fi Network 150 7 Enter the encryption key as described in Encrypted Access Points (A148). • This encryption key (password) is needed to connect the network device to the camcorder. If necessary, write it down. 8 Continue with the procedure to configure the IP address assignment (A150). Configuring the IP Address Settings At this point you need to configure the TCP/IP settings for the camcorder to be able to connect to a Wi-Fi network. If you need to configure the TCP/IP settings...