Canon Camera Eos 5d Mark Iii User Manual

301
wPrinting
5Set the date and file number 
imprinting.
 Set if necessary.
  Select <
I>, then press .
  Set as desired, then press < 0>.
6Set the number of copies.
  Set if necessary.
  Select , then press < 0>.
  Set the number of copies, then press 
.
7Start printing.
  Select [Print ], then press < 0>.
  With Easy printing, you  can print another image us ing the same settings. 
Just select the image and press the  button. With  Easy printing, 
the number of copies will  always be 1. (You cannot set...

302
wPrinting
In step 4 on page 300, select the printing 
effect. When the < e> icon is displayed 
brightly next to < z>, you can press 
the < B > button. You can then adjust 
the printing effect. What can be adjusted 
or what is displayed will depend on the 
selection made in step 4.
  Brightness
The image brightness can be adjusted.
  Adjust levels
When you select [ Manual], you can change 
the histogram’s distribution and adjust the 
image’s brightness and contrast.
With the Adjust levels scr een...

303
wPrinting
You can crop the image and print only 
the trimmed portion as if the image was 
recomposed.
Set the trimming right before printing. 
If you set the trimming and then set the 
print settings, you may have to set the 
trimming again before printing.
1 On the print settings sc reen, select [Trimming].
2 Set the trimming frame size, position, and aspect ratio.
 The image area within the tri mming frame will be printed. The 
trimming frame’s aspect ra tio can be changed with [
Paper settings]....

304
wPrinting
 Depending on the printer,  the trimmed image area may not be printed as 
you specified.
  The smaller you make the trimming fr ame, the grainier the picture will 
look in the print.
  While trimming the image, look at th e camera’s LCD monitor. If you look 
at the image on a TV sc reen, the trimming frame may not be displayed 
accurately.
Handling Printer ErrorsIf you resolve a printer error (no in k, no paper, etc.) and select [Continue] to 
resume printing but it doe s not resume,...

305
You can set the print type, date imprinting, and file number imprinting. 
The print settings will be applied to all print-ordered images. (They 
cannot be set individually for each image.)
1Select [Print order].
  Under the [ 31] tab, select [Print 
order], then press < 0>.
2Select [Set up].
  Select [Set up ], then press .
3Set the option as desired.
  Set the [Print type ], [Date ], and [ File 
No. ].
  Select the option to be set, then press 
. Select the desired setting, 
then press < 0>.
W...

306
W Digital Print Order Format (DPOF)
4 Exit the setting.
 Press the < M> button.
X The print order screen will reappear.
  Next, select [Sel.Image], [ Byn ], or 
[All image] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple thumbnail images are printed on one sheet.
K
LBothPrints both the standard and index prints.
Date On
[On ] imprints the recorde d date on the print.
Off
File numberOn[On ] imprints the file  number on the print.
Off
  Even if [...

307
W Digital Print Order Format (DPOF)
 Sel.Image
Select and order images one by one.
If you press the  button and turn the 
< 6 > dial counterclockwise, you can 
select an image from a three-image 
display. To return to the single-image 
display, turn the < 6> dial clockwise.
Press the < M> button to save the 
print order to the card.
[Standard] [Both]
Press < 0> and a print order for one 
copy of the displayed image will be 
placed. By turning the < 5> dial, you 
can set the quantity up to 99....

308
With a PictBridge printer, you can easily 
print images with DPOF.
1Prepare to print.
 See page 296. Follow the “Connecting  the Camera to a Printer” 
procedure up to step 5.
2Under the [ 31] tab, select [Print order].
3Select [Print].
 [Print] will be displayed only if the camera is connected to a 
printer and printing is possible.
4Set the [Paper settings] (p.298).
 Set the printing effects (p.300) if necessary.
5Select [OK].
W Direct Printing with DPOF
  Before printing, be sure  to set the paper...

309
You can connect the camera to a personal computer and operate the 
camera to transfer images on the card to the personal computer. This is 
called direct image transfer.
The direct image transfer can be  performed with the camera while 
you look at the LCD monitor.
The images transferred to the personal computer will be saved in the 
[Pictures] or [ My Pictures] folder and organized in  folders by shooting 
date. Before connecting the camera to the personal computer, be 
sure to install the provided...

310
d Transferring Images to a Personal Computer
3Set the camera’s power switch to 
.
 When the personal computer displays 
a screen to select the program, select 
[EOS Utility ].
X The EOS Utility screen will appear on 
the personal computer.
For RAW+JPEG images, you can specify 
which image to transfer. On the next 
page in step 2, select [ RAW+JPEG 
transfer ], and select the image to be 
transferred: [ JPEG only], [RAW only ], or 
[RAW+JPEG ].
3 Transferring RAW+JPEG Images
After the EOS Utility...