Canon Camera Eos 5d Mark Iii User Manual

251
You can magnify a captured image by approx. 1.5x to 10x on the LCD 
monitor.
1Magnify the image.
 The image can be magnified during 
image playback (single-image display), 
during image review after image 
capture, and from shooting-ready state.
 Press the < u> button.
XThe magnified view will appear. The 
magnified area and [
6 u] will be 
displayed on the lowe r right of the screen.
 The image magnification increases 
as you turn the  dial clockwise. 
You can magnify the image up to 10x.
 
The...

252
u Magnified View
Under the [ 33] tab, when you select 
[Magnificatn (apx)], you can set the 
starting magnification and initial position 
for the magnified view.
  1x (no magnification)
The image will not be magnified.  The magnified view will start with 
the single-image display.
  2x, 4x, 8x, 10x (magnify from center)
The magnified view will start at  the image center at the selected 
magnification.
  Actual size (from selected point)
The recorded image’s pixels will be  displayed at approx. 100%....

253
You can compare two images side by side on the LCD monitor.
1Set the two-image display.
 During image playback, press the 
 button.
X Two images will be displayed. The 
currently-selected image will be 
highlighted in a blue frame.
2Select the images to be 
compared.
  Pressing < 0> switches the blue 
frame between the two images.
  Turn the < 5> dial to select an 
image.
  Repeat step 2 to select the other 
image to be compared.
  By pressing the < Q> button, you can 
set the same magnification and...

254
You can rotate the displayed image to the desired orientation.
1Select [Rotate image].
 Under the [ 31] tab, select [Rotate 
image ], then press < 0>.
2Select an image.
  Turn the < 5> dial to select the 
image to be rotated.
  You can also select an image on the 
index display (p.249).
3Rotate the image.
 Each time you press < 0>, the 
image will rotate clockwise as follows: 
90°  → 270°  → 0°
  To rotate another image, repeat steps 
2 and 3.
  Press the < M> button to return to 
the menu.
b...

255
You can rate images and movies with one of five rating marks: l/m/
n/o/p . This function is called rating.
1Select an image or movie.
 During image playback, turn the 
 dial to select an image or movie 
to be rated.
  You can also select an image or 
movie on the index display (p.249).
2Rate the image or movie.
 Each time you press the < c> 
button, the rating mark will change: 
l /m /n/o/p/None.
  To rate another image or movie, 
repeat steps 1 and 2.
1Select [Rating].
 Under the [ 32] tab, select...

256
Setting Ratings
2Select an image or movie.
 Turn the < 5> dial to select the 
image or movie to be rated.
  If you press the < u> button and turn 
the < 6> dial counterclockwise, you 
can select an image or movie from a 
three-image display. To return to the 
single-image display, turn the < 6> 
dial clockwise.
3Rate the image or movie.
  Pressing < 0> will turn off the [s ] 
icon.
  Turn the < 5> dial to select a rating.
X The total number of images and 
movies rated will be counted for each...

257
During playback, you can press the  button to set the following: 
[K : Protect images , b : Rotate image,  9: Rating, R : RAW image 
processing (RAW images only),  S: Resize (JPEG image only),  : 
Highlight alert , :AF point display , e: Image jump w/6 ].
For movies, only the function s in bold above can be set.
1Press the  button.
  During image playback, press the 
 button.
X The Quick Control screen will appear.
2Select a function and set it.
  Tilt < 9> up or down to select a 
function.
X The...

258
Q Quick Control During Playback
To rotate an image, set [ 51: Auto rotate ] to [OnzD ]. If [ 51: Auto rotate ] 
is set to [ OnD] or [ Off], the [ b Rotate image ] setting will be  recorded to 
the image, but the came ra will not rotate the image for display.
 Pressing the < Q> button during the index di splay will switch to the 
single-image display and the Quick Control screen  will appear. Pressing 
the < Q> button again will return to the index display.
  For images taken with  another camera,...

259
You can play back movies in the following three ways:Use the provided AV cable or an HDMI 
Cable HTC-100 (sold separately) to 
connect the camera to a TV set. Then 
you can play back captured movies and 
still photos on the TV.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full High-Definition 
(Full HD: 1920x1080) and High-
Definition (HD: 1280x720) movies with 
higher image quality.
You can play back movies on the 
camera’s LCD monitor. You can...

260
k Enjoying Movies
The movie files recorded on the card can 
be transferred to a personal computer 
and played with ImageBrowser EX.
Playback and Editing with a Personal Computer(p.394)
 To have the movie play back smooth ly on a personal computer, use a 
high-performance personal computer . Regarding the computer hardware 
requirements for ImageBrowser EX, re fer to the PDF file ImageBrowser 
EX User Guide.
  If you want to use commer cially-available software to play back or edit 
the movies, be...